#!/usr/bin/with-contenv bashio
# 
#  Publish MQTT sensors for Config discovery.

set -e
CONFIG_PATH=/data/options.json

PLANTNAME="$(bashio::config 'Plantname')"
MQTT_Host="$(bashio::config 'MQTT_Host' 'core-mosquitto')"
MQTT_User="$(bashio::config 'MQTT_User')"
MQTT_Pass="$(bashio::config 'MQTT_Pass')"
MQTT_Topic="$(bashio::config 'MQTT_Topic')"
MQTT_Data="$(bashio::config 'MQTT_Data')"
#  arg="$(jq --raw-output '.MQTT_Data' /data/options.json | tr ',' '\n')"

ts="$(bashio::config 'DateTimeFormat' '%H:%M:%S %d/%m/%Y')"

bashio::log.magenta "$PLANTNAME"
bashio::log.red "${MQTT_Host}"
bashio::log.green "${MQTT_User}"
#  echo "${MQTT_Pass}"
bashio::log.blue "${MQTT_Topic}"
bashio::log.cyan "${MQTT_Data}"

#  make set config
if bashio::fs.file_exists '/data/device'; then
   bashio::log.info Using Existing Device info
   else
        value="$(bashio::config 'Connection_Type')"
        if  bashio::var.equals "${value}" "Bluetooth"; then
            /usr/bin/sbfspot/genSenBlue
            bashio::log.info
            bashio::log.info
            bashio::log.info "${__BASHIO_COLORS_BLUE}" "||    Generating HA Sensors    ||"
            
            #  Use SetConfig.cfg to post initial mqtt msg for sensors
            /usr/bin/sbfspot/SBFspot -v -finq -mqtt -cfg/usr/bin/sbfspot/SetConfig.cfg
            
            #  Subscribe to read SBFspot sensor post
            mosquitto_sub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t "$(bashio::addon.name)/device" -C 1 > /data/device            
            
        elif bashio::var.equals "${value}" "Ethernet"; then
            /usr/bin/sbfspot/genSenEth
            bashio::log.info
            bashio::log.info
            message=$(echo "||    Generating HA Sensors     ||")
            bashio::log.info "${__BASHIO_COLORS_MAGENTA}" "${message:=""}"
            
            #  Use SetConfig.cfg to post initial mqtt msg for sensors
            /usr/bin/sbfspot/SBFspot -v -finq -mqtt -cfg/usr/bin/sbfspot/SetConfig.cfg
            
            #  Subscribe to read SBFspot sensor post
            mosquitto_sub -h "${MQTT_Host}" -u "${MQTT_User}" -P "${MQTT_Pass}" -t "$(bashio::addon.name)/device" -C 1 > /data/device
                        
        else
            bashio::log.info "${__BASHIO_COLORS_RED}" ===================================
            bashio::log.info "${__BASHIO_COLORS_RED}" "Setup failed to create HA Sensors"
            bashio::log.info "${__BASHIO_COLORS_RED}" ===================================
        fi
fi

DEVICE_PATH=/data/device

InvSerial="$(jq --raw-output '.InvSerial' $DEVICE_PATH)"   #    <<< ---- change to Dummy serial if needed to get from mqtt 
InvName="$(jq --raw-output '.InvName' $DEVICE_PATH)"     #    <<< ---- prints bad formant SN: SerialNo or perhaps not
InvSwVer="$(jq --raw-output '.InvSwVer' $DEVICE_PATH)"
InvType="$(jq --raw-output '.InvType' $DEVICE_PATH)"
InvClass="$(jq --raw-output '.InvClass' $DEVICE_PATH)"
BTmac="$(jq --raw-output '.BTAddress' /data/options.json | tr -d ':' )"   #  <<< --- Compress BT MAC to use in Unique ID


bashio::log "$(cat "$DEVICE_PATH" | jq -C )"

#bashio::log.info "${__BASHIO_COLORS_RED}" "${InvSerial}"
#bashio::log.info "${__BASHIO_COLORS_RED}" "${InvName}"
#bashio::log.info "${__BASHIO_COLORS_RED}" "${InvSwVer}"
#bashio::log.info "${__BASHIO_COLORS_RED}" "${InvType}"
#bashio::log.info "${__BASHIO_COLORS_RED}" "${InvClass}"
#bashio::log.info "${__BASHIO_COLORS_RED}" "${BTmac}"

# Can this be used to send to options or cache?
#bashio::addon.option 'InvSerial' "${InvSerial}"

bashio::log.cyan "${InvSerial}"



debugMQTT='--quiet'    #  debug   '-d' or '--quiet'
RoK='-r'               #  retain  '-r' or  '-d' depending on value above 

#  Array stuff     ####    https://stackoverflow.com/questions/3685970/check-if-a-bash-array-contains-a-value
#if [[ " ${array[*]} " =~ " ${value} " ]]; then                     
#    # whatever you want to do when array contains value
#fi
#
#if [[ ! " ${array[*]} " =~ " ${value} " ]]; then
#    # whatever you want to do when array doesn't contain value
#fi
#
##   ALL MQTT_Data Option Values ARRAY creation   ##   https://riptutorial.com/bash/example/27007/split-string-into-an-array-in-bash
IFS=',' read -r -a array <<< "$MQTT_Data"
bashio::log.magenta "${array[@]}"

####  All Sensors List
#  PrgVersion,Plantname,Timestamp,SunRise,SunSet,InvSerial,InvName,InvTime,InvStatus,InvSwVer,InvClass,InvType,InvTemperature,InvGridRelay,EToday,ETotal,GridFreq,PACTot,PAC1,PAC2,PAC3,UAC1,UAC2,UAC3,IAC1,IAC2,IAC3,OperTm,FeedTm,PDCTot,PDC1,PDC2,PDC,UDC1,UDC2,UDC,IDC1,IDC2,IDC,BTSignal,BatTmpVal,BatVol,BatAmp,BatChaStt,InvWakeupTm,InvSleepTm,MeteringWOut,MeteringWIn,MeteringWTot
####  

###### MAKE SENSORS #######

value='PrgVersion'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SBFspot Version'
   mdi_icon='mdi:white-balance-sunny'
   #  devClass= << add in \"device_class\": \"$devClass\",
   #  stClass=  << add in \"state_class\": \"$stClass\",
   #  UoM=      << add in \"unit_of_measurement\": \"$UoM\",
   EnabDef='true' 
   ent_cat='diagnostic'
   
   bashio::log.info Setting Up "${value}"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ 'V' + value_json.$value | default(None) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
    else
     bashio::log.yellow Skipping "${value}"
fi

value='Plantname'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Plantname'
   mdi_icon='mdi:card-bulleted'
   #  devClass= << add in \"device_class\": \"$devClass\",
   #  stClass=  << add in \"state_class\": \"$stClass\",
   #  UoM=      << add in \"unit_of_measurement\": \"$UoM\",
   EnabDef='true' 
   ent_cat='diagnostic'
   
   bashio::log.info Setting Up "${value}"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
    else
     bashio::log.yellow Skipping "${value}"
fi

value='InvName'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Inverter Nom'
   mdi_icon='mdi:card-bulleted'
   #  devClass= << add in \"device_class\": \"$devClass\",
   #  stClass=  << add in \"state_class\": \"$stClass\",
   #  UoM=      << add in \"unit_of_measurement\": \"$UoM\",
   EnabDef='true' 
   ent_cat='diagnostic'
   
   bashio::log.info Setting Up "${value}"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
    else
     bashio::log.yellow Skipping "${value}"
fi

value='Timestamp'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Timestamp'
   mdi_icon='mdi:clock-digital'
   devClass='timestamp'        # 'timestamp' fiddly needs to be correctly formatted with TZ data <<# #>> null none empty not allowed.  #\"device_class\": \"$devClass\",#
   stClass=
   UoM=
   EnabDef='true'
   ent_cat=          ### diagnostic  config  sensor  # sensor can't be sent so # \"entity_category\": \"$ent_cat\", # removed   https://developers.home-assistant.io/docs/core/entity
   
   bashio::log.info Setting Up "${value}"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | as_datetime | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"device_class\": \"$devClass\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='InvTime'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Time Inverter'
   mdi_icon='mdi:clock'
   devClass='timestamp'  ### class removed to allow custom timestamps for InvTime SunRise and SunSet 
   stClass=
   UoM=
   EnabDef='true' 
   ent_cat='diagnostic'
   ts="$(bashio::config 'DateTimeFormat')"
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | as_timestamp | timestamp_custom( $ts ) | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='SunRise'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Sun Rise'
   mdi_icon='mdi:weather-sunny'
   devClass=    ### no class for timestamp custom
   stClass=
   UoM=
   EnabDef='true'
   ent_cat=
   ts="$(bashio::config 'DateTimeFormat')"
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | as_timestamp | timestamp_custom( $ts ) | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='SunSet'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Sun Set'
   mdi_icon='mdi:weather-hazy'
   devClass=    ### no class for timestamp custom
   stClass=
   UoM=
   EnabDef='true' 
   ent_cat=
   ts="$(bashio::config 'DateTimeFormat')"
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | as_timestamp | timestamp_custom( $ts ) | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='InvSerial'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Serial No'
   mdi_icon='mdi:card-bulleted-settings'
   devClass=
   stClass=
   UoM=
   EnabDef='true' 
   ent_cat='diagnostic'
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='InvClass'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA device type'
   mdi_icon='mdi:cupboard-outline'
   devClass=
   stClass=
   UoM=
   EnabDef='true'
   ent_cat='diagnostic'
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='InvType'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA device Model'
   mdi_icon='mdi:card-bulleted-settings'
   devClass=
   stClass=
   UoM=
   EnabDef='true' 
   ent_cat='diagnostic'
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='InvSwVer'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA device Firmware'
   mdi_icon=mdi:select-inverse
   devClass=
   stClass=
   UoM=
   EnabDef='true' 
   ent_cat='diagnostic'
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='InvStatus'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Inverter Status'
   mdi_icon=mdi:select-inverse
   devClass=
   stClass=
   UoM=
   EnabDef='true' 
   ent_cat='diagnostic'
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='InvTemperature'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Inverter Running Temp'
   mdi_icon='mdi:coolant-temperature'
   devClass='temperature'
   stClass='measurement'
   UoM='°C'
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='InvGridRelay'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA device Grid Relay'
   mdi_icon='mdi:electric-switch'
   devClass=
   stClass=
   UoM=
   EnabDef='false' 
   ent_cat='diagnostic' 
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='EToday'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Energy Daily'
   mdi_icon='mdi:solar-power-variant'
   devClass='energy'
   stClass='total_increasing'
   UoM='kWh'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='ETotal'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Energy Lifetime'
   mdi_icon='mdi:solar-power-variant'
   devClass='energy'
   stClass='total_increasing'
   UoM='kWh'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='PACTot'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA AC Power'
   mdi_icon='mdi:solar-power-variant'
   devClass='power'
   stClass='measurement'
   UoM='W'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='PAC1'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA AC Power Line 1'
   mdi_icon='mdi:transmission-tower'
   devClass='power'
   stClass='measurement'
   UoM='W'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='PAC2'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA AC Power Line 2'
   mdi_icon='mdi:transmission-tower'
   devClass='power'
   stClass='measurement'
   UoM='W'
   EnabDef='false' 
   ent_cat= 
      
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='PAC3'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA AC Power Line 3'
   mdi_icon='mdi:transmission-tower'
   devClass='power'
   stClass='measurement'
   UoM='W'
   EnabDef='false' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='UAC1'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Grid Phase 1 Voltage'
   mdi_icon='mdi:transmission-tower'
   devClass='voltage'
   stClass='measurement'
   UoM='V'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='UAC2'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Grid Phase 2 Voltage'
   mdi_icon='mdi:transmission-tower'
   devClass='voltage'
   stClass='measurement'
   UoM='V'
   EnabDef='false' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='UAC3'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Grid Phase 3 Voltage'
   mdi_icon='mdi:transmission-tower'
   devClass='voltage'
   stClass='measurement'
   UoM='V'
   EnabDef='false' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='IAC1'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Grid Phase 1 Current'
   mdi_icon='mdi:transmission-tower'
   devClass='current'
   stClass='measurement'
   UoM='A'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='IAC2'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Grid Phase 2 Current'
   mdi_icon='mdi:transmission-tower'
   devClass='current'
   stClass='measurement'
   UoM='A'
   EnabDef='false' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='IAC3'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Grid Phase 3 Current'
   mdi_icon='mdi:transmission-tower'
   devClass='current'
   stClass='measurement'
   UoM='A'
   EnabDef='false' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='OperTm'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Total Op Time'
   mdi_icon='mdi:clock'
   devClass='duration'
   stClass='total_increasing'
   UoM='h'
   EnabDef='true' 
   ent_cat='diagnostic'
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='FeedTm'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Total Feed In Time'
   mdi_icon='mdi:clock-digital'
   devClass='duration'
   stClass='total_increasing'
   UoM='h'
   EnabDef='true' 
   ent_cat='diagnostic'
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

##############   DC Power Section

value='PDCTot'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA DC All Strings'
   mdi_icon='mdi:solar-power-variant-outline'
   devClass='power'
   stClass='measurement'
   UoM='W'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='PDC1'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Array1 PDC'
   mdi_icon='mdi:solar-panel-large'
   devClass='power'
   stClass='measurement'
   UoM='W'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='PDC2'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Array2 PDC'
   mdi_icon='mdi:solar-panel'
   devClass='power'
   stClass='measurement'
   UoM='W'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='PDC'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Array PDC Tot'
   mdi_icon='mdi:solar-panel'
   devClass='power'
   stClass='measurement'
   UoM='W'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

###############   DC voltage Section

value='UDC1'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Array1 UDC'
   mdi_icon='mdi:solar-panel-large'
   devClass='voltage'
   stClass='measurement'
   UoM='V'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='UDC2'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Array2 UDC'
   mdi_icon='mdi:solar-panel'
   devClass='voltage'
   stClass='measurement'
   UoM='V'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='UDC'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Array UDC Tot'
   mdi_icon='mdi:solar-panel'
   devClass='voltage'
   stClass='measurement'
   UoM='V'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

#################   DC Current section

value='IDC1'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Array1 IDC'
   mdi_icon='mdi:solar-panel-large'
   devClass='current'
   stClass='measurement'
   UoM='A'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='IDC2'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Array2 IDC'
   mdi_icon='mdi:solar-panel'
   devClass='current'
   stClass='measurement'
   UoM='A'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='IDC'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Array IDC Tot'
   mdi_icon='mdi:solar-panel'
   devClass='current'
   stClass='measurement'
   UoM='A'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

######## 

value='GridFreq'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Grid Frequency'
   mdi_icon='mdi:transmission-tower'
   devClass='frequency'
   stClass='measurement'
   UoM='Hz'   
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='BTSignal'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Bluetooth Signal'
   mdi_icon='mdi:bluetooth'
   devClass='signal_strength'
   stClass='measurement'
   UoM='dB' 
   EnabDef='true' 
   ent_cat='diagnostic'
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | round(1) | default(0) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"entity_category\": \"$ent_cat\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='BatTmpVal'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Battery Temp'
   mdi_icon='mdi:home-battery-outline'
   devClass='temperature'
   stClass='measurement'
   UoM='°C' 
   EnabDef='false' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='BatVol'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Battery Voltage'
   mdi_icon='mdi:battery-charging-medium'
   devClass='voltage'
   stClass='measurement'
   UoM='V'
   EnabDef='false' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}" 
fi

value='BatAmp'
 if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Battery Current'
   mdi_icon='mdi:battery-charging-medium'
   devClass='current'
   stClass='measurement'
   UoM='A'
   EnabDef='false' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

#set -x
value='BatChaStt'
 if [[ " ${array[*]} " =~ " $value " ]]; then
    
   describe='SMA Battery Charging'
   mdi_icon='mdi:battery-clock'
   devClass='battery'
   stClass='total'
   UoM='%'   
   EnabDef='false' 
   ent_cat=                         ## enabled_by_default boolean (optional, default: true)     ##disabled_by # "user"? or null or integration? doesn't work.
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else
     bashio::log.yellow Skipping "${value}"
fi

value='InvWakeupTm'
if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA WakeUp time'
   mdi_icon='mdi:sleep-off'
   devClass=    ### no class for timestamp custom
   stClass=
   UoM=
   EnabDef='true' 
   ent_cat=
   ts="$(bashio::config 'DateTimeFormat')"
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | as_timestamp | timestamp_custom( $ts ) | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='InvSleepTm'
if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA sleep time'
   mdi_icon='mdi:sleep'
   devClass=    ### no class for timestamp custom
   stClass=
   UoM=
   EnabDef='true' 
   ent_cat=
   ts="$(bashio::config 'DateTimeFormat')"
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | as_timestamp | timestamp_custom( $ts ) | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi
value='MeteringWOut'
if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Power --> Grid'
   mdi_icon='mdi:transmission-tower'
   devClass='power'
   stClass='measurement'
   UoM='W'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | default() }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='MeteringWIn'
if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Power <-- Grid'
   mdi_icon='mdi:transmission-tower'
   devClass='power'
   stClass='measurement'
   UoM='W'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi

value='MeteringWTot'
if [[ " ${array[*]} " =~ " $value " ]]; then
   
   describe='SMA Power Net Grid'
   mdi_icon='mdi:transmission-tower'
   devClass='power'
   stClass='measurement'
   UoM='W'
   EnabDef='true' 
   ent_cat=
   
   bashio::log.info Setting Up "$value"
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value | float(default) }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\", \"unit_of_measurement\": \"$UoM\", \"enabled_by_default\": \"$EnabDef\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" "$debugMQTT" "$RoK"
   else 
     bashio::log.yellow Skipping "${value}"
fi