#!/usr/bin/with-contenv bashio
# shellcheck shell=bash

#  Publish MQTT sensors for Config discovery.

#set -x

CONFIG_PATH=/data/options.json

PLANTNAME="$(bashio::config 'Plantname')"
MQTT_Host="$(bashio::config 'MQTT_Host' 'core-mosquitto')"
MQTT_User="$(bashio::config 'MQTT_User' '!secret mqtt_user')"
MQTT_Pass="$(bashio::config 'MQTT_Pass' '!secret mqtt_pass')"
MQTT_Topic="$(bashio::config 'MQTT_Topic')"
MQTT_Data="$(bashio::config 'MQTT_Data')"


#  make set config
#  mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t "$(bashio::addon.name)/device" -m "{\"SensorsHA\": \"Purge\"}" -r   ###  why??>> /data/options.json

#  make set config
if bashio::fs.file_exists '/data/device'; then
   bashio::log.green "{ Using Existing Device info }"
   else
           value="$(bashio::config 'Connection_Type')"
        if bashio::var.equals "${value}" "Bluetooth"; then
           /usr/bin/sbfspot/genSenBlue
           bashio::log.info
           bashio::log.info
           bashio::log.info "${__BASHIO_COLORS_BLUE}" "||    Collecting Inv Serial    ||"
            
           #  Use SetConfig.cfg to post initial mqtt msg for sensors
           /usr/bin/sbfspot/SBFspot -v -finq -mqtt -cfg/usr/bin/sbfspot/SetConfig.cfg
            
           #  Subscribe to read SBFspot sensor post
           mosquitto_sub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t "$(bashio::addon.name)/device" -C 1 > /data/device            
            
      elif bashio::var.equals "${value}" "Ethernet"; then
           /usr/bin/sbfspot/genSenEth
           bashio::log.info
           bashio::log.info
           message=$(echo "||    Collecting Inv Serial     ||")
           bashio::log.info "${__BASHIO_COLORS_MAGENTA}" "${message:=""}"
            
           #  Use SetConfig.cfg to post initial mqtt msg for sensors
           /usr/bin/sbfspot/SBFspot -v -finq -mqtt -cfg/usr/bin/sbfspot/SetConfig.cfg
            
           #  Subscribe to read SBFspot sensor post
           mosquitto_sub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t "$(bashio::addon.name)/device" -C 1 > /data/device
                        
        else
           bashio::log.info "${__BASHIO_COLORS_RED}" '==================================='
           bashio::log.info "${__BASHIO_COLORS_RED}" '|    "Failed Purge HA Sensors"    |'
           bashio::log.info "${__BASHIO_COLORS_RED}" '==================================='
        fi
fi

      ####   Why here? should be somewhere else like run    
      #value="$(jq --raw-output '.SensorsHA' $CONFIG_PATH)"
      #if  bashio::var.equals "${value}" "Create"; then
      #    /usr/bin/sbfspot/genSenBlue.sh
      #    bashio::log.info
      #    bashio::log.info "${__BASHIO_COLORS_BLUE}" "||    HA Sensors Exist    ||"
      #    bashio::log.info
      #elif bashio::var.equals "${value}" "Purge"; then
      #    bashio::log.info "${__BASHIO_COLORS_RED}" '==================================='
      #    bashio::log.info "${__BASHIO_COLORS_RED}" '|   "Purge Retained HA Sensors"   |'
      #    bashio::log.info "${__BASHIO_COLORS_RED}" '==================================='
      #else
      #    bashio::log.info "${__BASHIO_COLORS_RED}" '==================================='
      #    bashio::log.info "${__BASHIO_COLORS_RED}" '|     "Purge HA MQTT Sensors"     |'
      #    bashio::log.info "${__BASHIO_COLORS_RED}" '==================================='
      #fi

#  Use SetConfig.cfg to post initial mqtt msg for sensors
#  /usr/bin/sbfspot/SBFspot -v -finq -mqtt -cfg/usr/bin/sbfspot/SetConfig.cfg
#
#   ALL Values
#   MQTT_Data=Timestamp,InvTime,SunRise,SunSet,InvSerial,InvName,InvClass,InvType,InvSwVer,InvStatus,InvTemperature,InvGridRelay,EToday,ETotal,PACTot,UDC1,UDC2,IDC1,IDC2,PDC1,PDC2,PDCTot,OperTm,FeedTm,PAC1,PAC2,PAC3,UAC1,UAC2,UAC3,IAC1,IAC2,IAC3,GridFreq,BTSignal,BatTmpVal,BatVol,BatAmp,BatChaStt
#
#  Known Working MQTT msg and variables
#
#  value='InvName'               << -- Change to value you need
#  describe='SMA Inverter Nom'   << -- Short descriptuion for HA Name
#  mdi_icon='mdi:flash'          << -- mdi icons
#
#  /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" -r
#
# dev state icon uom
# /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "{\"name\": \"$describe\", \"state_topic\": \"homeassistant/sbfspot_$PLANTNAME/sbfspot_$InvSerial\", \"value_template\": \"{{ value_json.$value }}\", \"unique_id\": \"$InvSerial"'_'"$value\", \"device_class\": \"$devClass\", \"state_class\": \"$stClass\" \"unit_of_measurement\": \"$UoM\", \"icon\": \"$mdi_icon\", \"device\": { \"identifiers\": [\"$(bashio::addon.name)""-Sensors\"], \"name\": \"HAOS-SBFspot\", \"model\": \"$InvType\", \"manufacturer\": \"SMA\", \"sw_version\": \"$InvSwVer\" }}" -r


#set -x

#  Subscribe to read SBFspot sensor post
mosquitto_sub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t "$(bashio::addon.name)/device" -C 1 > /data/device

DEVICE_PATH=/data/device
bashio::log "$(cat "$DEVICE_PATH" | jq -C )"

InvSerial="$(jq --raw-output '.InvSerial' $DEVICE_PATH)"   #    <<< ---- change to Dummy serial if needed to get from mqtt 
InvName="$(jq --raw-output '.InvName' $DEVICE_PATH)"     #    <<< ---- prints bad formant SN: SerialNo
InvSwVer="$(jq --raw-output '.InvSwVer' $DEVICE_PATH)"
InvType="$(jq --raw-output '.InvType' $DEVICE_PATH)"
InvClass="$(jq --raw-output '.InvClass' $DEVICE_PATH)"

if bashio::config 'InvSerial' 'InvSerial'; then
   bashio::log.info "${__BASHIO_COLORS_RED}" '==================================='
   bashio::log.info "${__BASHIO_COLORS_YELLOW}" '|     "Purge HA MQTT Sensors"     |'
   bashio::log.info "${__BASHIO_COLORS_RED}" '==================================='
   else
     bashio::log.info "${__BASHIO_COLORS_RED}" '|      "Boom BOOM BOOOOOOOMMM"      |'
     bashio::log.info "${__BASHIO_COLORS_RED}" '|     "Sending Empty MQTT MSGs"     |'
     bashio::log.info "${__BASHIO_COLORS_RED}" '|     "Check Removal MQTT Broker"   |'
fi


if bashio::var.has_value "${MQTT_Data}" "InvName" ; then
   value='InvName'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value 'Timestamp' ; then
   value='Timestamp'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "InvTime" ; then
   value='InvTime'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "SunRise" ; then
   value='SunRise'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "SunSet" ; then
   value='SunSet'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "InvSerial" ; then
   value='InvSerial'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "InvClass" ; then
   value='InvClass'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "InvType" ; then
   value='InvType'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "InvSwVer" ; then
   value='InvSwVer'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "InvStatus" ; then
   value='InvStatus'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "InvTemperature" ; then
   value='InvTemperature'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "InvGridRelay" ; then
   value='InvGridRelay'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "EToday" ; then
   value='EToday'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "ETotal" ; then
   value='ETotal'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "PACTot" ; then
   value='PACTot'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "UDC1" ; then
   value='UDC1'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "UDC2" ; then
   value='UDC2'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "IDC1" ; then
   value='IDC1'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "IDC2" ; then
   value='IDC2'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "PDC1" ; then
   value='PDC1'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "PDC2" ; then
   value='PDC2'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "PDCTot" ; then
   value='PDCTot'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "OperTm" ; then
   value='OperTm'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "FeedTm" ; then
   value='FeedTm'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "PAC1" ; then
   value='PAC1'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "PAC2" ; then
   value='PAC2'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "PAC3" ; then
   value='PAC3'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "UAC1" ; then
   value='UAC1'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "UAC2" ; then
   value='UAC2'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "UAC3" ; then
   value='UAC3'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "IAC1" ; then
   value='IAC1'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "IAC2" ; then
   value='IAC2'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "IAC3" ; then
   value='IAC3'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "GridFreq" ; then
   value='GridFreq'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "BTSignal" ; then
   value='BTSignal'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "BatTmpVal" ; then
   value='BatTmpVal'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "BatVol" ; then
   value='BatVol'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "BatAmp" ; then
   value='BatAmp'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi

if bashio::var.has_value "${MQTT_Data}" "BatChaStt" ; then
    value='BatChaStt'
   
   /usr/bin/mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sensor/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial""$value"/config -m "" -r
fi


#  remove device info from default topic and device topic
mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t homeassistant/sbfspot_"$PLANTNAME"/sbfspot_"$InvSerial" -m "" -r
mosquitto_pub -h "$MQTT_Host" -u "$MQTT_User" -P "$MQTT_Pass" -t "$(bashio::addon.name)/device" -m "" -r

bashio::log.info "${__BASHIO_COLORS_RED}" '|     "Boom BOOM BOOOOOOOMMM"     |'
bashio::log.info "${__BASHIO_COLORS_RED}" '|     "deleting /data/device"     |'
rm /data/device