+ + HomeMatic +
++
Set up a HomeMatic hardware layer. At the moment we don’t support hmIP but that is in progress. For learning and handling devices use our internal homematic panel and services (in progress) or use Homematic-Manager > 2.0.
+The logic layer will be Home-Assistant. There is no ReGa or other logic layer installed. You can’t import exists configuration, you need new learn it into Home-Assistant.
+Follow devices will be supported and tested:
+-
+
- HM-MOD-RPI-PCB +
{
+ "type": "CCU2",
+ "device": "device": "/dev/ttyAMA0"
+}
+Configuration variables:
+-
+
- type (Require): Device type for RFD service. Look into handbook of your device. +
- device (Require): Device on host. +
Home Assistant configuration
+Use the following configuration in Home Assistant to use it:
+homematic:
+ interfaces
+ BidCoS-RF:
+ ip: core-homematic
+ port: 2001
+