In order for Home Assistant to recognize well the sensor, you will need to change its configuration from Basic Set (default) to Binary Sensor report or Alarm report. Currently there’s no way to do this in Home Assistant but you can use ozwcp (OpenZWave control panel), Domoticz or similar to do it
+These devices will either show as a binary sensor or a sensor called Alarm xxxx and will report a numeric value. Test to see what value is what. Sometimes this is noted in the device manual.
These devices require a network key to be set for the zwave network before they are paired. This key is set in OpenZwave’s options.xml which is located in Open Zwave’s directory. This should also be the same directory as config_path: in your configuration.yaml. If it’s not, make sure you have the same values in all the files you are using.
+The option is commented out by default in options.xml and is a default key. Make your own unique key. The key is in Hexadecimals.
+It is best to pair these devices in Open Zwave Control Panel or other Zwave tool that can show you logs while pairing. Test the device before you save the configuration.
+Make sure you copy the newly saved zwcfg_[home_id].xmlinto your HomeAssistant config directory.
HomeAssistant will trigger a event when command_class_basic changes value on a node.
+This can be virtually anything, so tests have to be made to determine what value equals what.
+You can use this for automations.
Example:
+yaml
+- alias: Minimote Button Pressed
+ trigger:
+ platform: event
+ event_type: zwave.basic_level
+ event_data:
+ entity_id: aeon_labs_minimote_1
+ basic_level: 255
+
HomeAssistant will trigger a event when a scene is activated by a node in the zwave network.
+This can be a press of a button, so tests have to be made to determine what scene_id equals what.
+You can use this for automations.
Example:
+yaml
+- alias: Minimote Button 1 Pressed
+ trigger:
+ platform: event
+ event_type: zwave.scene_activated
+ event_data:
+ entity_id: aeon_labs_minimote_1
+ scene_id: 1
+
Here’s a handy configuration for the Aeon Labs Minimote that defines all possible button presses. Put it into automation.yaml.
In order for Home Assistant to recognize well the motion sensor, you will need to change its configuration from Basic Set (default) to Binary Sensor report. Currently there’s no way to do this in Home Assistant but you can use ozwcp (OpenZWave control panel), Domoticz or similar to do it