From 5f1cc300668b94e5700064bdbf887a1e886fce5e Mon Sep 17 00:00:00 2001
From: Fabian Affolter <fabian@affolter-engineering.ch>
Date: Sat, 7 May 2016 13:58:27 +0200
Subject: [PATCH] Add HA release

---
 .../_components/alarm_control_panel.verisure.markdown |  1 +
 source/_components/arduino.markdown                   |  1 +
 source/_components/binary_sensor.http.markdown        |  1 +
 source/_components/binary_sensor.rpi_gpio.markdown    |  1 +
 source/_components/camera.generic.markdown            |  1 +
 source/_components/device_tracker.asuswrt.markdown    |  1 +
 source/_components/device_tracker.owntracks.markdown  |  1 +
 source/_components/device_tracker.tplink.markdown     |  1 +
 source/_components/downloader.markdown                |  1 +
 source/_components/isy994.markdown                    |  1 +
 source/_components/light.limitlessled.markdown        |  1 +
 source/_components/media_player.itunes.markdown       |  1 +
 source/_components/media_player.kodi.markdown         |  1 +
 source/_components/media_player.mpd.markdown          |  1 +
 source/_components/media_player.plex.markdown         |  3 ++-
 source/_components/media_player.sonos.markdown        |  1 +
 source/_components/media_player.squeezebox.markdown   |  1 +
 source/_components/modbus.markdown                    |  1 +
 source/_components/mqtt.markdown                      |  1 +
 source/_components/notify.instapush.markdown          |  1 +
 source/_components/notify.nma.markdown                |  1 +
 source/_components/notify.pushover.markdown           |  1 +
 source/_components/notify.slack.markdown              |  1 +
 source/_components/notify.smtp.markdown               |  1 +
 source/_components/notify.syslog.markdown             |  1 +
 source/_components/notify.xmpp.markdown               |  1 +
 source/_components/rfxtrx.markdown                    |  4 +++-
 source/_components/sensor.arduino.markdown            |  1 +
 source/_components/sensor.bitcoin.markdown            |  1 +
 source/_components/sensor.efergy.markdown             |  1 +
 source/_components/sensor.forecast.markdown           |  1 +
 source/_components/sensor.http.markdown               |  1 +
 source/_components/sensor.modbus.markdown             |  1 +
 source/_components/sensor.openweathermap.markdown     |  1 +
 source/_components/sensor.rest.markdown               |  1 +
 source/_components/sensor.sabnzbd.markdown            |  1 +
 .../sensor.swiss_public_transport.markdown            |  1 +
 source/_components/sensor.systemmonitor.markdown      |  1 +
 source/_components/sensor.time_date.markdown          |  1 +
 source/_components/sensor.transmission.markdown       |  1 +
 source/_components/sensor.worldclock.markdown         |  1 +
 source/_components/switch.arduino.markdown            |  3 ++-
 source/_components/switch.command_line.markdown       |  1 +
 source/_components/switch.edimax.markdown             |  1 +
 source/_components/switch.hikvision.markdown          |  1 +
 source/_components/switch.modbus.markdown             |  1 +
 source/_components/switch.rpi_gpio.markdown           |  1 +
 source/_components/switch.transmission.markdown       |  1 +
 source/_components/verisure.markdown                  | 11 +++++------
 49 files changed, 57 insertions(+), 9 deletions(-)

diff --git a/source/_components/alarm_control_panel.verisure.markdown b/source/_components/alarm_control_panel.verisure.markdown
index edf0248b5d..c806c0cf32 100644
--- a/source/_components/alarm_control_panel.verisure.markdown
+++ b/source/_components/alarm_control_panel.verisure.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: verisure.png
 ha_category: Alarm
+ha_release: 0.7.3
 ---
 
 
diff --git a/source/_components/arduino.markdown b/source/_components/arduino.markdown
index e961ab1514..d6f450c342 100644
--- a/source/_components/arduino.markdown
+++ b/source/_components/arduino.markdown
@@ -10,6 +10,7 @@ footer: true
 logo: arduino.png
 ha_category: DIY
 featured: true
+ha_release: pre 0.7
 ---
 
 The [Arduino](https://www.arduino.cc/) device family are microcontroller boards that are often based on the ATmega328 chip. They come with digital input/output pins (some can be used as PWM outputs), analog inputs, and a USB connection. The equipment depends on the [type](https://www.arduino.cc/en/Main/Products) of board. The most common ones are the Arduino Uno and the Arduino Leonardo with 14 digital input/output pins and 6 analog input pins.
diff --git a/source/_components/binary_sensor.http.markdown b/source/_components/binary_sensor.http.markdown
index 7e7dfe1e9a..aa279efb20 100644
--- a/source/_components/binary_sensor.http.markdown
+++ b/source/_components/binary_sensor.http.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: http.png
 ha_category: Binary Sensor
+ha_release: pre 0.7
 ---
 
 The URL for a binary sensor looks like the example below:
diff --git a/source/_components/binary_sensor.rpi_gpio.markdown b/source/_components/binary_sensor.rpi_gpio.markdown
index dc2c0b8888..a75fce5c0c 100644
--- a/source/_components/binary_sensor.rpi_gpio.markdown
+++ b/source/_components/binary_sensor.rpi_gpio.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: raspberry-pi.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/camera.generic.markdown b/source/_components/camera.generic.markdown
index 3d88569b68..8fa5522c65 100644
--- a/source/_components/camera.generic.markdown
+++ b/source/_components/camera.generic.markdown
@@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Camera
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/device_tracker.asuswrt.markdown b/source/_components/device_tracker.asuswrt.markdown
index e1590a59c9..74e76adce4 100644
--- a/source/_components/device_tracker.asuswrt.markdown
+++ b/source/_components/device_tracker.asuswrt.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: asus.png
 ha_category: Presence Detection
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/device_tracker.owntracks.markdown b/source/_components/device_tracker.owntracks.markdown
index 6fceeda380..9aab6a52b1 100644
--- a/source/_components/device_tracker.owntracks.markdown
+++ b/source/_components/device_tracker.owntracks.markdown
@@ -10,6 +10,7 @@ footer: true
 logo: owntracks.png
 ha_category: Presence Detection
 featured: true
+ha_release: 0.7.4
 ---
 
 
diff --git a/source/_components/device_tracker.tplink.markdown b/source/_components/device_tracker.tplink.markdown
index 50dbf15802..37fa0f80fd 100644
--- a/source/_components/device_tracker.tplink.markdown
+++ b/source/_components/device_tracker.tplink.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: tp-link.png
 ha_category: Presence Detection
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/downloader.markdown b/source/_components/downloader.markdown
index 5b97207786..b667bfcc6c 100644
--- a/source/_components/downloader.markdown
+++ b/source/_components/downloader.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: home-assistant.png
 ha_category: Other
+ha_release: pre 0.7
 ---
 
 The `downloader` component provides a service to download files. It will raise an error and not continue to set itself up when the download directory does not exist.
diff --git a/source/_components/isy994.markdown b/source/_components/isy994.markdown
index eac00a8cc4..d3c28ba929 100644
--- a/source/_components/isy994.markdown
+++ b/source/_components/isy994.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: universal_devices.png
 ha_category: Hub
+ha_release: pre 0.7
 ---
 
 The ISY994 is a home automation controller that is capable of controlling Insteon and X10 devices. The controller is also capable of controlling Z-Wave devices but that functionality has not yet been confirmed with Home Assistant.
diff --git a/source/_components/light.limitlessled.markdown b/source/_components/light.limitlessled.markdown
index 62b5c66f4d..d400635838 100644
--- a/source/_components/light.limitlessled.markdown
+++ b/source/_components/light.limitlessled.markdown
@@ -10,6 +10,7 @@ sharing: true
 footer: true
 ha_category: Light
 ha_iot_class: "Assumed State"
+ha_release: pre 0.7
 ---
 
 `limitlessled` can control your [LimitlessLED](http://www.limitlessled.com/) lights from within Home Assistant. The lights are also known as EasyBulb, AppLight, AppLamp, MiLight, LEDme, dekolight or iLight.
diff --git a/source/_components/media_player.itunes.markdown b/source/_components/media_player.itunes.markdown
index 3e77b6f862..625a46a59f 100644
--- a/source/_components/media_player.itunes.markdown
+++ b/source/_components/media_player.itunes.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: itunes.png
 ha_category: Media Player
+ha_release: 0.7.3
 ---
 
 
diff --git a/source/_components/media_player.kodi.markdown b/source/_components/media_player.kodi.markdown
index e18d1e7a82..8861c04c1d 100644
--- a/source/_components/media_player.kodi.markdown
+++ b/source/_components/media_player.kodi.markdown
@@ -10,6 +10,7 @@ footer: true
 logo: kodi.png
 ha_category: Media Player
 featured: true
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/media_player.mpd.markdown b/source/_components/media_player.mpd.markdown
index b600a2e415..449a597250 100644
--- a/source/_components/media_player.mpd.markdown
+++ b/source/_components/media_player.mpd.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: mpd.png
 ha_category: Media Player
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/media_player.plex.markdown b/source/_components/media_player.plex.markdown
index 72b4787d81..a90abe77d8 100644
--- a/source/_components/media_player.plex.markdown
+++ b/source/_components/media_player.plex.markdown
@@ -10,10 +10,11 @@ footer: true
 logo: plex.png
 ha_category: Media Player
 featured: true
+ha_release: 0.7.4
 ---
 
 
-The Plex platform allows you to connect a [Plex Media Server](https://plex.tv) to Home Assistant. It will allow you to control media playback and see the current playing item. The preferred way to setup the Plex platform is by enabling the the [the discovery component](/components/discovery/) and requires GDM to be enabled.
+The `plex` platform allows you to connect a [Plex Media Server](https://plex.tv) to Home Assistant. It will allow you to control media playback and see the current playing item. The preferred way to setup the Plex platform is by enabling the the [the discovery component](/components/discovery/) and requires GDM to be enabled.
 
 If local authentication is enabled or multiple users are defined, HASS requires an authentication token to be entered in the webinterface. See [Finding your account token / X-Plex-Token](https://support.plex.tv/hc/en-us/articles/204059436).
 
diff --git a/source/_components/media_player.sonos.markdown b/source/_components/media_player.sonos.markdown
index ebea7c807d..b2db3341a4 100644
--- a/source/_components/media_player.sonos.markdown
+++ b/source/_components/media_player.sonos.markdown
@@ -10,6 +10,7 @@ footer: true
 logo: sonos.png
 ha_category: Media Player
 featured: true
+ha_release: 0.7.3
 ---
 
 
diff --git a/source/_components/media_player.squeezebox.markdown b/source/_components/media_player.squeezebox.markdown
index ba31bd2550..e819dba2bc 100644
--- a/source/_components/media_player.squeezebox.markdown
+++ b/source/_components/media_player.squeezebox.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: logitech.png
 ha_category: Media Player
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/modbus.markdown b/source/_components/modbus.markdown
index d8e4a36daa..133e169209 100644
--- a/source/_components/modbus.markdown
+++ b/source/_components/modbus.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: modbus.png
 ha_category: Hub
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/mqtt.markdown b/source/_components/mqtt.markdown
index 4a2a9a68d5..966b96ca45 100644
--- a/source/_components/mqtt.markdown
+++ b/source/_components/mqtt.markdown
@@ -10,6 +10,7 @@ footer: true
 logo: mqtt.png
 ha_category: Hub
 featured: true
+ha_release: pre 0.7
 ---
 
 MQTT (aka MQ Telemetry Transport) is a machine-to-machine or "Internet of Things" connectivity protocol on top of TCP/IP. It allows extremely lightweight publish/subscribe messaging transport.
diff --git a/source/_components/notify.instapush.markdown b/source/_components/notify.instapush.markdown
index 7fba31285d..aeed476d1d 100644
--- a/source/_components/notify.instapush.markdown
+++ b/source/_components/notify.instapush.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: instapush.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/notify.nma.markdown b/source/_components/notify.nma.markdown
index 9f22a757c5..7c548f7fb9 100644
--- a/source/_components/notify.nma.markdown
+++ b/source/_components/notify.nma.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: nma.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/notify.pushover.markdown b/source/_components/notify.pushover.markdown
index 9e7161e361..36d7c7e007 100644
--- a/source/_components/notify.pushover.markdown
+++ b/source/_components/notify.pushover.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: pushover.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/notify.slack.markdown b/source/_components/notify.slack.markdown
index 7cb5219a74..54df112134 100644
--- a/source/_components/notify.slack.markdown
+++ b/source/_components/notify.slack.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: slack.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/notify.smtp.markdown b/source/_components/notify.smtp.markdown
index 41b269159d..9b9c419e8f 100644
--- a/source/_components/notify.smtp.markdown
+++ b/source/_components/notify.smtp.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: smtp.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/notify.syslog.markdown b/source/_components/notify.syslog.markdown
index b6ed6338f3..89f7f3b224 100644
--- a/source/_components/notify.syslog.markdown
+++ b/source/_components/notify.syslog.markdown
@@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/notify.xmpp.markdown b/source/_components/notify.xmpp.markdown
index 5fe7a01c4f..8d09f3e4b0 100644
--- a/source/_components/notify.xmpp.markdown
+++ b/source/_components/notify.xmpp.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: xmpp.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/rfxtrx.markdown b/source/_components/rfxtrx.markdown
index 18e44c582a..5811903992 100644
--- a/source/_components/rfxtrx.markdown
+++ b/source/_components/rfxtrx.markdown
@@ -8,8 +8,10 @@ comments: false
 sharing: true
 footer: true
 ha_category: Hub
+ha_release: pre 0.7
 ---
-The rfxtrx component supports RFXtrx devices by [RFXCOM](http://www.rfxcom.com) which communicate in the frequency range of 433.92 MHz.
+
+The `rfxtrx` component supports RFXtrx devices by [RFXCOM](http://www.rfxcom.com) which communicate in the frequency range of 433.92 MHz.
 
 To enable RFXtrx in your installation, add the following to your `configuration.yaml` file:
 
diff --git a/source/_components/sensor.arduino.markdown b/source/_components/sensor.arduino.markdown
index f893a4ada0..fa4ce33841 100644
--- a/source/_components/sensor.arduino.markdown
+++ b/source/_components/sensor.arduino.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: arduino.png
 ha_category: DIY
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/sensor.bitcoin.markdown b/source/_components/sensor.bitcoin.markdown
index e575411c0a..9b4525c9e3 100644
--- a/source/_components/sensor.bitcoin.markdown
+++ b/source/_components/sensor.bitcoin.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: bitcoin.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/sensor.efergy.markdown b/source/_components/sensor.efergy.markdown
index 15dc7f7fb7..a8030465fb 100644
--- a/source/_components/sensor.efergy.markdown
+++ b/source/_components/sensor.efergy.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: efergy.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/sensor.forecast.markdown b/source/_components/sensor.forecast.markdown
index d8a5d217f6..42bdc2beb2 100644
--- a/source/_components/sensor.forecast.markdown
+++ b/source/_components/sensor.forecast.markdown
@@ -10,6 +10,7 @@ footer: true
 logo: forecast.png
 ha_category: Weather
 featured: true
+ha_release: pre 0.7
 ---
 
 The `forecast` platform uses the [Forecast.io](https://forecast.io/) web service as a source of meteorological data for your location. The location is based on the `longitude` and `latitude` coordinates configured in `configuration.yaml`.  The coordinates are auto-detected but to take advantage of the hyper-local weather reported by forecast.io, you can refine them down to your exact home address. GPS coordinates can be found by using Google Maps and clicking on your home.
diff --git a/source/_components/sensor.http.markdown b/source/_components/sensor.http.markdown
index 7d7bcb63eb..b9586d01fe 100644
--- a/source/_components/sensor.http.markdown
+++ b/source/_components/sensor.http.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: http.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 The URL for a sensor looks like the example below:
diff --git a/source/_components/sensor.modbus.markdown b/source/_components/sensor.modbus.markdown
index 99f85d03cc..a8f4acdc32 100644
--- a/source/_components/sensor.modbus.markdown
+++ b/source/_components/sensor.modbus.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: modbus.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/sensor.openweathermap.markdown b/source/_components/sensor.openweathermap.markdown
index 66e5e4f3d8..6c8a4f85c6 100644
--- a/source/_components/sensor.openweathermap.markdown
+++ b/source/_components/sensor.openweathermap.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: openweathermap.png
 ha_category: Weather
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/sensor.rest.markdown b/source/_components/sensor.rest.markdown
index 26c3203d47..aae1513a32 100644
--- a/source/_components/sensor.rest.markdown
+++ b/source/_components/sensor.rest.markdown
@@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Sensor
+ha_release: 0.7.4
 ---
 
 
diff --git a/source/_components/sensor.sabnzbd.markdown b/source/_components/sensor.sabnzbd.markdown
index 984143da7f..68bdf6035a 100644
--- a/source/_components/sensor.sabnzbd.markdown
+++ b/source/_components/sensor.sabnzbd.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: sabnzbd.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/sensor.swiss_public_transport.markdown b/source/_components/sensor.swiss_public_transport.markdown
index 3128c52758..d923a8ff4c 100644
--- a/source/_components/sensor.swiss_public_transport.markdown
+++ b/source/_components/sensor.swiss_public_transport.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 ha_category: Sensor
 ha_iot_class: "Local Polling"
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/sensor.systemmonitor.markdown b/source/_components/sensor.systemmonitor.markdown
index e1fb58cd46..e47965cb18 100644
--- a/source/_components/sensor.systemmonitor.markdown
+++ b/source/_components/sensor.systemmonitor.markdown
@@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 The `systemmonitor` sensor platform to allow you to monitor disk usage, memory usage, CPU usage, and running processes. This platform has superseded the process component which is now considered deprecated.
diff --git a/source/_components/sensor.time_date.markdown b/source/_components/sensor.time_date.markdown
index 614a6346c8..2ca3159d91 100644
--- a/source/_components/sensor.time_date.markdown
+++ b/source/_components/sensor.time_date.markdown
@@ -10,6 +10,7 @@ footer: true
 logo: home-assistant.png
 ha_category: Sensor
 ha_iot_class: "Local Push"
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/sensor.transmission.markdown b/source/_components/sensor.transmission.markdown
index 52f82ad288..8346c80947 100644
--- a/source/_components/sensor.transmission.markdown
+++ b/source/_components/sensor.transmission.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: transmission.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/sensor.worldclock.markdown b/source/_components/sensor.worldclock.markdown
index 38e2aca0e3..3b63b96bf0 100644
--- a/source/_components/sensor.worldclock.markdown
+++ b/source/_components/sensor.worldclock.markdown
@@ -10,6 +10,7 @@ footer: true
 logo: home-assistant.png
 ha_category: Sensor
 ha_iot_class: "Local Push"
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/switch.arduino.markdown b/source/_components/switch.arduino.markdown
index c888d85d71..e6426f688e 100644
--- a/source/_components/switch.arduino.markdown
+++ b/source/_components/switch.arduino.markdown
@@ -9,10 +9,11 @@ sharing: true
 footer: true
 logo: arduino.png
 ha_category: DIY
+ha_release: pre 0.7
 ---
 
 
-The `arduino` switch platform allows you to control the digital pins of your [Arduino](https://www.arduino.cc/) board. Support for switching pins is limited to high/on and low/off of the digital pins. PWM (pin 3,5,6,9,10, and 11 on an Arduino Uno) is not supported yet.
+The `arduino` switch platform allows you to control the digital pins of your [Arduino](https://www.arduino.cc/) board. Support for switching pins is limited to high/on and low/off of the digital pins. PWM (pin 3, 5, 6, 9, 10, and 11 on an Arduino Uno) is not supported yet.
 
 To enable the Arduino pins with Home Assistant, add the following section to your `configuration.yaml` file:
 
diff --git a/source/_components/switch.command_line.markdown b/source/_components/switch.command_line.markdown
index ebe82456f7..d45f734179 100644
--- a/source/_components/switch.command_line.markdown
+++ b/source/_components/switch.command_line.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: command_line.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/switch.edimax.markdown b/source/_components/switch.edimax.markdown
index b0078775a0..8f6164d32b 100644
--- a/source/_components/switch.edimax.markdown
+++ b/source/_components/switch.edimax.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: edimax.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/switch.hikvision.markdown b/source/_components/switch.hikvision.markdown
index 4665c48ef3..36f4581e40 100644
--- a/source/_components/switch.hikvision.markdown
+++ b/source/_components/switch.hikvision.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: hikvision.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/switch.modbus.markdown b/source/_components/switch.modbus.markdown
index 667b5a3dc7..c351234570 100644
--- a/source/_components/switch.modbus.markdown
+++ b/source/_components/switch.modbus.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: modbus.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/switch.rpi_gpio.markdown b/source/_components/switch.rpi_gpio.markdown
index 608ca7aa1a..81e0967020 100644
--- a/source/_components/switch.rpi_gpio.markdown
+++ b/source/_components/switch.rpi_gpio.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: raspberry-pi.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/switch.transmission.markdown b/source/_components/switch.transmission.markdown
index e5a1e43512..3ffb614d96 100644
--- a/source/_components/switch.transmission.markdown
+++ b/source/_components/switch.transmission.markdown
@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: transmission.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 
diff --git a/source/_components/verisure.markdown b/source/_components/verisure.markdown
index 29199cef7e..37a0948a91 100644
--- a/source/_components/verisure.markdown
+++ b/source/_components/verisure.markdown
@@ -9,19 +9,18 @@ sharing: true
 footer: true
 logo: verisure.png
 ha_category: Hub
+ha_release: pre 0.7
 ---
 
-
-
 Home Assistant has support to integrate your [Verisure](https://www.verisure.com/) devices.
 
 We support:
 
- * Alarm
- * Smartplugs
- * Reading from thermometers and hygrometers integrated in various devices
+ * [Alarm](/components/alarm_control_panel.verisure/)
+ * [Smartplugs](/components/switch.verisure/)
+ * Reading from thermometers and hygrometers integrated in various [devices](/components/sensor.verisure/)
  * Mouse Detector
- * Locks 
+ * [Locks](/components/lock.verisure/)
 
 To integrate Verisure with Home Assistant, add the following section to your `configuration.yaml` file: