make install, you can alternatively build your own pytho
zwave:
usb_path: /dev/ttyUSB0
config_path: /usr/local/share/python-openzwave/config
- polling_interval: 10000
+ polling_interval: 60000
customize:
sensor.greenwave_powernode_6_port_energy_10:
polling_intensity: 1
@@ -183,7 +183,7 @@ Instead of make install, you can alternatively build your own pytho
The Z-Wave component exposes two services to help maintain the network.
+The Z-Wave component exposes four services to help maintain the network.
| add_node | -+ | Put the zwave controller in inclusion mode. Allows one to add a new device to the zwave network. |
| remove_node | -+ | Put the zwave controller in exclusion mode. Allows one to remove a device from the zwave network. |
| heal_network | -+ | Tells the controller to “heal” the network. Bascially asks the nodes to tell the controller all of their neighbors so the controller can refigure out optimal routing. |
| soft_reset | -+ | Tells the controller to do a “soft reset”. This is not supposed to lose any data, but different controllers can behave differently to a “soft reset” command. |
The soft_reset and heal_network commands can be used as part of an automation script
+to help keep a zwave network running relliably. For example:
# Example configuration.yaml automation entry +automation: + - alias: soft reset at 2:30am + trigger: + platform: time + after: '2:30:00' + action: + service: zwave.soft_reset + + - alias: heal at 2:31am + trigger: + platform: time + after: '2:31:00' + action: + service: zwave.heal_network +