In the examples above, we told Alexa to say OK when she succesfully completed the task. This is effective but a little dull! We can again use templates to spice things up a little.
In the examples above, we told Alexa to say OK when she successfully completed the task. This is effective but a little dull! We can again use templates to spice things up a little.
First create a file called alexa_confirm.yaml with something like the following in it (go on, be creative!):
Philips Hue support is integrated into Home Assistant as a light platform. The preferred way to setup the Philips Hue platform is by enabling the the discovery component.
-Once discovered, locate “configurator.philips_hue” in the entities list ( < > ) and add it to configuration.yaml. Restart home assistant so that it is visible in the home assistant dashboard. Once home assistant is restarted, locate and click on configurator.philips_hue to bring up the intitiation dialog. This will prompt you to press the Hue button to register the Hue hub in home assistant. Once complete, the configurator entity can be removed from configuration.yaml.
+Once discovered, locate “configurator.philips_hue” in the entities list ( < > ) and add it to configuration.yaml. Restart home assistant so that it is visible in the home assistant dashboard. Once home assistant is restarted, locate and click on configurator.philips_hue to bring up the initiation dialog. This will prompt you to press the Hue button to register the Hue hub in home assistant. Once complete, the configurator entity can be removed from configuration.yaml.
Restarting home assistant once more should result in the Hue lights listed as “light” entities. Add these light entities to configuration.yaml and restart home assistant once more to complete the installation.
diff --git a/components/mqtt/index.html b/components/mqtt/index.html index 4162c384e8..28fb444a2e 100644 --- a/components/mqtt/index.html +++ b/components/mqtt/index.html @@ -267,7 +267,7 @@ Home Assistant will automatically load the correct certificate if you connect toThe MQTT component will register the service publish which allows publishing messages to MQTT topics. There are two ways of specifiying your payload. You can either use payload to hard-code a payload or use payload_template to specify a template that will be rendered to generate the payload.
The MQTT component will register the service publish which allows publishing messages to MQTT topics. There are two ways of specifying your payload. You can either use payload to hard-code a payload or use payload_template to specify a template that will be rendered to generate the payload.
{
"topic": "home-assistant/light/1/command",
diff --git a/components/switch.command_line/index.html b/components/switch.command_line/index.html
index 62a8c76a4c..de8c80a0e2 100644
--- a/components/switch.command_line/index.html
+++ b/components/switch.command_line/index.html
@@ -190,7 +190,7 @@ This switch will shutdown your host immediately, there will be no confirmation.
The Vera hub is a controller mainly connecting to Z-Wave devices.
-Switches, Lights (inc Dimmers), Locks, Sensors and Binary sensors are supported - and will be automaticaly added when HA connects to your Vera controller.
+Switches, Lights (inc Dimmers), Locks, Sensors and Binary sensors are supported - and will be automatically added when HA connects to your Vera controller.
To use Vera devices in your installation, add the following to your configuration.yaml file using the IP and port number of your Vera controller:
diff --git a/getting-started/installation-synology/index.html b/getting-started/installation-synology/index.html index 03c169f739..b1d36f7a68 100644 --- a/getting-started/installation-synology/index.html +++ b/getting-started/installation-synology/index.html @@ -101,7 +101,7 @@Using the Synology webadmin:
Home Assistant uses the YAML syntax for configuration. YAML might take a while to get used to but is really powerful in allowing you to express complex configurations.
-For each component that you want to use in Home Assistant, you add code in your configuraton.yaml file to specify its settings.
+
For each component that you want to use in Home Assistant, you add code in your configuration.yaml file to specify its settings.
The following example entry specifies that you want to use the notify component with the pushbullet platform.
notify:
diff --git a/sitemap.xml b/sitemap.xml
index eacd79739b..7d42837d0d 100644
--- a/sitemap.xml
+++ b/sitemap.xml
@@ -2113,62 +2113,62 @@
https://home-assistant.io/demo/frontend.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/demo/index.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/demo/panels/ha-panel-dev-event.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/demo/panels/ha-panel-dev-info.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/demo/panels/ha-panel-dev-service.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/demo/panels/ha-panel-dev-state.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/demo/panels/ha-panel-dev-template.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/demo/panels/ha-panel-history.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/demo/panels/ha-panel-iframe.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/demo/panels/ha-panel-logbook.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/demo/panels/ha-panel-map.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/googlef4f3693c209fe788.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/static/fonts/roboto/DESCRIPTION.en_us.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/static/fonts/robotomono/DESCRIPTION.en_us.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00
https://home-assistant.io/static/mdi-demo.html
-2016-10-05T07:44:59+00:00
+2016-10-05T08:18:14+00:00