diff --git a/atom.xml b/atom.xml index 478355b09d..e11937723d 100644 --- a/atom.xml +++ b/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ @@ -13,6 +13,73 @@ Octopress + + <![CDATA[PocketCHIP running Home Assistant]]> + + 2016-07-06T05:00:00+00:00 + https://home-assistant.io/blog/2016/07/06/pocketchip-running-home-assistant +
+Over a year ago I participated in the kickstarter campain for “CHIP - The World’s First Nine Dollar Computer” by Next Thing Co.. I went for the PocketCHIP because of the idea. Display, built-in storage (thus no need for SD cards), battery-powered, and a keyboard are pretty nice features. Last week a package arrives…

+ + + +

Thanks to Next Thing Co. and their CHIP which is actually 9 USD the space requirement for a single board computer has decreased. No ethernet and HDMI output helped with that. But I guess that the next development cycle will allow us to put those boards in a matchbox including wired networking and a SATA interface.

+ +

+ + Size comparison of a Cubieboard, OrangePi One, and CHIP. +

+ +

If you start using a PocketCHIP you will definitly look like a Blackberry or a GameBoy user. Typing is done with your thumbs :-)

+ +

First a couple of tweaks like setting up sudo, upgradeing the existing installation, change passwords, enabling ssh, and removal of the annoying stuff then installation of Home Assistant. There is not much to tell…it’s straight-forward. For the sake of completeness below the notes about what I did.

+ +

A Debian installation is available by default. This means that some dependencies for Home Assistant are missing. I haven’t checked if a new build for the PocketCHIP would include them. So, after a $ sudo apt-get update installing those dependencies take a minute or two.

+ +
+ 
$ sudo apt-get install python3-dev python3-pip python3-venv
+
+
+
+ +

As usual I run Python applications in a venv.

+ +
+ 
$ pvenv ha
+
+
+
+ +

Let’s activate the created environment.

+ +
+ 
$ cd ha
+$ source bin/activate
+
+
+
+ +

If you haven’t seen the next two commands already then you should definitiy visit our frontsite.

+ +
+ 
$ pip3 install homeassistant
+$ hass --open-ui
+
+
+
+ +

With surf the browsing experience on the low-resolution display is not that great. Most shartphones, even very cheap ones, have touchscreens with higher resolutions. Nevermind, midori is not better.

+ +

+ + PocketCHIP with Home Assistant frontend +

+ +

Well, with PocketCHIP and Home Assistant you could run your home automation on a 49 USD device with a touchscreen, an integrated USP, and a keyboard. With the GPIO available on top of the display you could even connect your PocketCHIP directly to sensors and actuators.

+ +]]> + + <![CDATA[0.23: Envisalink, Homematic, HDMI-CEC and Sony Bravia TV]]> @@ -1110,26 +1177,6 @@ For example, my wife works next door - and I couldn’t detect whether she’s a

I hope that this little article could give you an idea of extending Home Assistant in an unconventional way.

-]]> - - - - <![CDATA[Your hub should be local and open]]> - - 2016-04-05T04:11:00+00:00 - https://home-assistant.io/blog/2016/04/05/your-hub-should-be-local-and-open - Today the news spread that Google will be shutting down the Revolv hubs. And shutting down here doesn’t mean they stop selling or supporting them - no, they are sending an update to each hub to turn your perfectly fine home automation hub into a useless piece of plastic. The fact that this seemed like a good idea by Google astonishes me. If anything, they should have gone the same route as ninjasphere: open it all up and let people decide on the fate of their own hub.

- -

I’ve said it before but I’ll repeat it again:

- -
-

The cloud should be treated as an extension to your smart home instead of running it.

-
- -

Your hub should not be affected when your internet breaks down or the company that sold you your hub goes out of business. It should work locally so that it can continue to work even long after the vendor goes out of business or decides to kill it. Preferably, your hub should also be open so that the community can take over development after the vendor stops caring.

- -

Unless you can afford losing a product here and there, be cautious when buying IoT products that depend on the cloud from companies that are not well established. The chances are high that they go bankrupt or get acquired and closed. This however is easier said than done as Gartner predicts that by 2017, 50 percent of IoT solutions will originate in startups that are less than three years old.

- ]]> diff --git a/blog/2014/12/18/website-launched/index.html b/blog/2014/12/18/website-launched/index.html index 5d72e8315d..03a99dab56 100644 --- a/blog/2014/12/18/website-launched/index.html +++ b/blog/2014/12/18/website-launched/index.html @@ -179,6 +179,12 @@ diff --git a/blog/2014/12/26/home-control-home-automation-and-the-smart-home/index.html b/blog/2014/12/26/home-control-home-automation-and-the-smart-home/index.html index 64ab0fb270..f52c00da58 100644 --- a/blog/2014/12/26/home-control-home-automation-and-the-smart-home/index.html +++ b/blog/2014/12/26/home-control-home-automation-and-the-smart-home/index.html @@ -234,6 +234,12 @@ This article will try to explain how they all relate.

diff --git a/blog/2015/01/04/hey-pushbullet-nice-talking-to-you/index.html b/blog/2015/01/04/hey-pushbullet-nice-talking-to-you/index.html index bbf7926977..3c343506e4 100644 --- a/blog/2015/01/04/hey-pushbullet-nice-talking-to-you/index.html +++ b/blog/2015/01/04/hey-pushbullet-nice-talking-to-you/index.html @@ -218,6 +218,12 @@ api_key=ABCDEFGHJKLMNOPQRSTUVXYZ diff --git a/blog/2015/01/11/bootstrapping-your-setup-with-discovery/index.html b/blog/2015/01/11/bootstrapping-your-setup-with-discovery/index.html index 5047bf02eb..60d9a5eda9 100644 --- a/blog/2015/01/11/bootstrapping-your-setup-with-discovery/index.html +++ b/blog/2015/01/11/bootstrapping-your-setup-with-discovery/index.html @@ -193,6 +193,12 @@ diff --git a/blog/2015/01/13/nest-in-da-house/index.html b/blog/2015/01/13/nest-in-da-house/index.html index b1fa9eec71..b55282239d 100644 --- a/blog/2015/01/13/nest-in-da-house/index.html +++ b/blog/2015/01/13/nest-in-da-house/index.html @@ -196,6 +196,12 @@ password=YOUR_PASSWORD diff --git a/blog/2015/01/24/release-notes/index.html b/blog/2015/01/24/release-notes/index.html index ece8bc5f90..3254aded07 100644 --- a/blog/2015/01/24/release-notes/index.html +++ b/blog/2015/01/24/release-notes/index.html @@ -202,6 +202,12 @@ Home Assistant now supports --open-ui and --demo-mode diff --git a/blog/2015/02/08/looking-at-the-past/index.html b/blog/2015/02/08/looking-at-the-past/index.html index 6674c302e0..86cfac2561 100644 --- a/blog/2015/02/08/looking-at-the-past/index.html +++ b/blog/2015/02/08/looking-at-the-past/index.html @@ -210,6 +210,12 @@ Events are saved in a local database. Google Graphs is used to draw the graph. D diff --git a/blog/2015/02/24/streaming-updates/index.html b/blog/2015/02/24/streaming-updates/index.html index f3e4e337e7..cdc018f501 100644 --- a/blog/2015/02/24/streaming-updates/index.html +++ b/blog/2015/02/24/streaming-updates/index.html @@ -195,6 +195,12 @@ diff --git a/blog/2015/03/01/home-assistant-migrating-to-yaml/index.html b/blog/2015/03/01/home-assistant-migrating-to-yaml/index.html index 56e7fb4d4f..85cfbe352a 100644 --- a/blog/2015/03/01/home-assistant-migrating-to-yaml/index.html +++ b/blog/2015/03/01/home-assistant-migrating-to-yaml/index.html @@ -185,6 +185,12 @@ diff --git a/blog/2015/03/08/new-logo/index.html b/blog/2015/03/08/new-logo/index.html index 7b7a5579d7..4fa7e9e2f8 100644 --- a/blog/2015/03/08/new-logo/index.html +++ b/blog/2015/03/08/new-logo/index.html @@ -186,6 +186,12 @@ The old logo, the new detailed logo and the new simple logo. diff --git a/blog/2015/03/11/release-notes/index.html b/blog/2015/03/11/release-notes/index.html index de20d0dfeb..c2d5ec7a3a 100644 --- a/blog/2015/03/11/release-notes/index.html +++ b/blog/2015/03/11/release-notes/index.html @@ -225,6 +225,12 @@ An initial version of voice control for Home Assistant has landed. The current i diff --git a/blog/2015/03/22/release-notes/index.html b/blog/2015/03/22/release-notes/index.html index 8d37e3b41d..332d0b4e21 100644 --- a/blog/2015/03/22/release-notes/index.html +++ b/blog/2015/03/22/release-notes/index.html @@ -262,6 +262,12 @@ I (Paulus) have contributed a scene component. A user can create scenes that cap diff --git a/blog/2015/04/25/release-notes/index.html b/blog/2015/04/25/release-notes/index.html index 1a2e0d9c81..b62a4a1256 100644 --- a/blog/2015/04/25/release-notes/index.html +++ b/blog/2015/04/25/release-notes/index.html @@ -273,6 +273,12 @@ diff --git a/blog/2015/05/09/utc-time-zone-awareness/index.html b/blog/2015/05/09/utc-time-zone-awareness/index.html index 6b4bebc0b2..3e16e24e59 100644 --- a/blog/2015/05/09/utc-time-zone-awareness/index.html +++ b/blog/2015/05/09/utc-time-zone-awareness/index.html @@ -208,6 +208,12 @@ diff --git a/blog/2015/05/14/release-notes/index.html b/blog/2015/05/14/release-notes/index.html index 82dcecc0b6..8220da5789 100644 --- a/blog/2015/05/14/release-notes/index.html +++ b/blog/2015/05/14/release-notes/index.html @@ -300,6 +300,12 @@ Before diving into the newly supported devices and services, I want to highlight diff --git a/blog/2015/06/10/release-notes/index.html b/blog/2015/06/10/release-notes/index.html index a75c7a7c06..4ca4f440d6 100644 --- a/blog/2015/06/10/release-notes/index.html +++ b/blog/2015/06/10/release-notes/index.html @@ -353,6 +353,12 @@ This switch platform allows you to control your motion detection setting on your diff --git a/blog/2015/07/11/ip-cameras-arduino-kodi-efergy-support/index.html b/blog/2015/07/11/ip-cameras-arduino-kodi-efergy-support/index.html index d601006952..6515e39ba2 100644 --- a/blog/2015/07/11/ip-cameras-arduino-kodi-efergy-support/index.html +++ b/blog/2015/07/11/ip-cameras-arduino-kodi-efergy-support/index.html @@ -305,6 +305,12 @@ Fabian has added support for Forecast.io to g diff --git a/blog/2015/08/09/mqtt-raspberry-pi-squeezebox-asuswrt-support/index.html b/blog/2015/08/09/mqtt-raspberry-pi-squeezebox-asuswrt-support/index.html index 0f94b1460a..df7607c8af 100644 --- a/blog/2015/08/09/mqtt-raspberry-pi-squeezebox-asuswrt-support/index.html +++ b/blog/2015/08/09/mqtt-raspberry-pi-squeezebox-asuswrt-support/index.html @@ -294,6 +294,12 @@ Support for Temper temperature sensors has been contributed by +
  • + PocketCHIP running Home Assistant +
    • + + +
  • 0.23: Envisalink, Homematic, HDMI-CEC and Sony Bravia TV
    • @@ -317,12 +323,6 @@ Support for Temper temperature sensors has been contributed by - 0.21: Improved Web and support for EnOcean, LIRC and Osram Lightify - - - diff --git a/blog/2015/08/17/verisure-and-modern-tp-link-router-support/index.html b/blog/2015/08/17/verisure-and-modern-tp-link-router-support/index.html index fffcd123a1..1f6d111585 100644 --- a/blog/2015/08/17/verisure-and-modern-tp-link-router-support/index.html +++ b/blog/2015/08/17/verisure-and-modern-tp-link-router-support/index.html @@ -204,6 +204,12 @@ diff --git a/blog/2015/08/26/laundry-automation-with-moteino-mqtt-and-home-assistant/index.html b/blog/2015/08/26/laundry-automation-with-moteino-mqtt-and-home-assistant/index.html index c47686d3fa..7eb813957c 100644 --- a/blog/2015/08/26/laundry-automation-with-moteino-mqtt-and-home-assistant/index.html +++ b/blog/2015/08/26/laundry-automation-with-moteino-mqtt-and-home-assistant/index.html @@ -317,6 +317,12 @@ The automation and script syntax here is using a deprecated and no longer suppor diff --git a/blog/2015/08/31/version-7-revamped-ui-and-improved-distribution/index.html b/blog/2015/08/31/version-7-revamped-ui-and-improved-distribution/index.html index e61467994d..da487106a1 100644 --- a/blog/2015/08/31/version-7-revamped-ui-and-improved-distribution/index.html +++ b/blog/2015/08/31/version-7-revamped-ui-and-improved-distribution/index.html @@ -291,6 +291,12 @@ diff --git a/blog/2015/09/11/different-ways-to-use-mqtt-with-home-assistant/index.html b/blog/2015/09/11/different-ways-to-use-mqtt-with-home-assistant/index.html index 5d3811e28a..b67d37396c 100644 --- a/blog/2015/09/11/different-ways-to-use-mqtt-with-home-assistant/index.html +++ b/blog/2015/09/11/different-ways-to-use-mqtt-with-home-assistant/index.html @@ -494,6 +494,12 @@ PubSubClient client(ethClient); diff --git a/blog/2015/09/13/home-assistant-meets-ifttt/index.html b/blog/2015/09/13/home-assistant-meets-ifttt/index.html index 740512d0d8..37825c7d73 100644 --- a/blog/2015/09/13/home-assistant-meets-ifttt/index.html +++ b/blog/2015/09/13/home-assistant-meets-ifttt/index.html @@ -353,6 +353,12 @@ diff --git a/blog/2015/09/18/monitoring-with-glances-and-home-assistant/index.html b/blog/2015/09/18/monitoring-with-glances-and-home-assistant/index.html index 55b13584ab..5541cd5656 100644 --- a/blog/2015/09/18/monitoring-with-glances-and-home-assistant/index.html +++ b/blog/2015/09/18/monitoring-with-glances-and-home-assistant/index.html @@ -254,6 +254,12 @@ Glances web server started on http://0.0.0.0:61208/ diff --git a/blog/2015/09/19/alarm-sonos-and-itunes-support/index.html b/blog/2015/09/19/alarm-sonos-and-itunes-support/index.html index 7bdbfee007..c7a6b5a85c 100644 --- a/blog/2015/09/19/alarm-sonos-and-itunes-support/index.html +++ b/blog/2015/09/19/alarm-sonos-and-itunes-support/index.html @@ -233,6 +233,12 @@ Automation has gotten a lot of love. It now supports conditions, multiple trigge diff --git a/blog/2015/10/05/home-assistant-goes-geo-with-owntracks/index.html b/blog/2015/10/05/home-assistant-goes-geo-with-owntracks/index.html index 9d65ee07a6..6aa20fc8ec 100644 --- a/blog/2015/10/05/home-assistant-goes-geo-with-owntracks/index.html +++ b/blog/2015/10/05/home-assistant-goes-geo-with-owntracks/index.html @@ -209,6 +209,12 @@ Map in Home Assistant showing two people and three zones (home, school, work) diff --git a/blog/2015/10/11/measure-temperature-with-esp8266-and-report-to-mqtt/index.html b/blog/2015/10/11/measure-temperature-with-esp8266-and-report-to-mqtt/index.html index df04658877..e5776698e4 100644 --- a/blog/2015/10/11/measure-temperature-with-esp8266-and-report-to-mqtt/index.html +++ b/blog/2015/10/11/measure-temperature-with-esp8266-and-report-to-mqtt/index.html @@ -553,6 +553,12 @@ Adafruit_HDC1000 hdc = Adafruit_HDC1000(); diff --git a/blog/2015/10/11/rfxtrx-blinkstick-and-snmp-support/index.html b/blog/2015/10/11/rfxtrx-blinkstick-and-snmp-support/index.html index 2a36f9a34d..6f7e8ffa73 100644 --- a/blog/2015/10/11/rfxtrx-blinkstick-and-snmp-support/index.html +++ b/blog/2015/10/11/rfxtrx-blinkstick-and-snmp-support/index.html @@ -198,6 +198,12 @@ diff --git a/blog/2015/10/26/firetv-and-radiotherm-now-supported/index.html b/blog/2015/10/26/firetv-and-radiotherm-now-supported/index.html index c4d12f1adc..b14652073a 100644 --- a/blog/2015/10/26/firetv-and-radiotherm-now-supported/index.html +++ b/blog/2015/10/26/firetv-and-radiotherm-now-supported/index.html @@ -220,6 +220,12 @@ This makes more sense as most people run Home Assistant as a daemon

    diff --git a/blog/2015/11/16/zwave-switches-lights-and-honeywell-thermostats-now-supported/index.html b/blog/2015/11/16/zwave-switches-lights-and-honeywell-thermostats-now-supported/index.html index 4b2939b363..64e537275e 100644 --- a/blog/2015/11/16/zwave-switches-lights-and-honeywell-thermostats-now-supported/index.html +++ b/blog/2015/11/16/zwave-switches-lights-and-honeywell-thermostats-now-supported/index.html @@ -216,6 +216,12 @@ diff --git a/blog/2015/11/22/survey-november-2015/index.html b/blog/2015/11/22/survey-november-2015/index.html index 86330dc932..ffe88765c9 100644 --- a/blog/2015/11/22/survey-november-2015/index.html +++ b/blog/2015/11/22/survey-november-2015/index.html @@ -256,6 +256,12 @@ diff --git a/blog/2015/12/05/community-highlights/index.html b/blog/2015/12/05/community-highlights/index.html index c3608304af..1f7116d034 100644 --- a/blog/2015/12/05/community-highlights/index.html +++ b/blog/2015/12/05/community-highlights/index.html @@ -191,6 +191,12 @@ diff --git a/blog/2015/12/06/locks-rollershutters-binary-sensors-and-influxdb-support/index.html b/blog/2015/12/06/locks-rollershutters-binary-sensors-and-influxdb-support/index.html index 7d8086e056..c2b77a30ab 100644 --- a/blog/2015/12/06/locks-rollershutters-binary-sensors-and-influxdb-support/index.html +++ b/blog/2015/12/06/locks-rollershutters-binary-sensors-and-influxdb-support/index.html @@ -198,6 +198,12 @@ diff --git a/blog/2015/12/07/influxdb-and-grafana/index.html b/blog/2015/12/07/influxdb-and-grafana/index.html index c2e3f0e195..152a5576b1 100644 --- a/blog/2015/12/07/influxdb-and-grafana/index.html +++ b/blog/2015/12/07/influxdb-and-grafana/index.html @@ -289,6 +289,12 @@ $ sudo systemctl status grafana-server diff --git a/blog/2015/12/10/activating-tasker-tasks-from-home-assistant-using-command-line-switches/index.html b/blog/2015/12/10/activating-tasker-tasks-from-home-assistant-using-command-line-switches/index.html index 054667f631..1981c284b0 100644 --- a/blog/2015/12/10/activating-tasker-tasks-from-home-assistant-using-command-line-switches/index.html +++ b/blog/2015/12/10/activating-tasker-tasks-from-home-assistant-using-command-line-switches/index.html @@ -239,6 +239,12 @@ requests.get(' +
  • + PocketCHIP running Home Assistant +
    • + + +
  • 0.23: Envisalink, Homematic, HDMI-CEC and Sony Bravia TV
    • @@ -262,12 +268,6 @@ requests.get(' - 0.21: Improved Web and support for EnOcean, LIRC and Osram Lightify - - - diff --git a/blog/2015/12/12/philips-hue-blocks-3rd-party-bulbs/index.html b/blog/2015/12/12/philips-hue-blocks-3rd-party-bulbs/index.html index 17ea4a2689..8b5c331e87 100644 --- a/blog/2015/12/12/philips-hue-blocks-3rd-party-bulbs/index.html +++ b/blog/2015/12/12/philips-hue-blocks-3rd-party-bulbs/index.html @@ -211,6 +211,12 @@ Philips Hue FAQ entries regarding 3rd party light bulbs. diff --git a/blog/2015/12/13/setup-encryption-using-lets-encrypt/index.html b/blog/2015/12/13/setup-encryption-using-lets-encrypt/index.html index 557d68e98d..5b5994f795 100644 --- a/blog/2015/12/13/setup-encryption-using-lets-encrypt/index.html +++ b/blog/2015/12/13/setup-encryption-using-lets-encrypt/index.html @@ -278,6 +278,12 @@ sudo docker run -it --rm -p 80:80 --name certbot \ diff --git a/blog/2015/12/22/amazon-echo-icloud-and-templates/index.html b/blog/2015/12/22/amazon-echo-icloud-and-templates/index.html index b8218790e2..d778a3699b 100644 --- a/blog/2015/12/22/amazon-echo-icloud-and-templates/index.html +++ b/blog/2015/12/22/amazon-echo-icloud-and-templates/index.html @@ -232,6 +232,12 @@ diff --git a/blog/2016/01/17/extended-support-for-diy-solutions/index.html b/blog/2016/01/17/extended-support-for-diy-solutions/index.html index 20d4379032..1f8caa26b4 100644 --- a/blog/2016/01/17/extended-support-for-diy-solutions/index.html +++ b/blog/2016/01/17/extended-support-for-diy-solutions/index.html @@ -212,6 +212,12 @@ diff --git a/blog/2016/01/19/perfect-home-automation/index.html b/blog/2016/01/19/perfect-home-automation/index.html index 54299e02dc..2b7635692b 100644 --- a/blog/2016/01/19/perfect-home-automation/index.html +++ b/blog/2016/01/19/perfect-home-automation/index.html @@ -216,6 +216,12 @@ diff --git a/blog/2016/01/30/insteon-lifx-twitter-and-zigbee/index.html b/blog/2016/01/30/insteon-lifx-twitter-and-zigbee/index.html index a55cf606b1..748f34544f 100644 --- a/blog/2016/01/30/insteon-lifx-twitter-and-zigbee/index.html +++ b/blog/2016/01/30/insteon-lifx-twitter-and-zigbee/index.html @@ -218,6 +218,12 @@ Example of the new views in the frontend. Learn mor diff --git a/blog/2016/02/09/smarter-smart-things-with-mqtt-and-home-assistant/index.html b/blog/2016/02/09/smarter-smart-things-with-mqtt-and-home-assistant/index.html index cb4b0ce0f4..3161550093 100644 --- a/blog/2016/02/09/smarter-smart-things-with-mqtt-and-home-assistant/index.html +++ b/blog/2016/02/09/smarter-smart-things-with-mqtt-and-home-assistant/index.html @@ -405,6 +405,12 @@ Z-Wave light bulb | diff --git a/blog/2016/02/12/classifying-the-internet-of-things/index.html b/blog/2016/02/12/classifying-the-internet-of-things/index.html index b522369ad2..f948aec5f6 100644 --- a/blog/2016/02/12/classifying-the-internet-of-things/index.html +++ b/blog/2016/02/12/classifying-the-internet-of-things/index.html @@ -355,6 +355,12 @@ diff --git a/blog/2016/02/13/speedtest-bloomsky-splunk-and-garage-doors/index.html b/blog/2016/02/13/speedtest-bloomsky-splunk-and-garage-doors/index.html index 483fa8083a..aa41031a3c 100644 --- a/blog/2016/02/13/speedtest-bloomsky-splunk-and-garage-doors/index.html +++ b/blog/2016/02/13/speedtest-bloomsky-splunk-and-garage-doors/index.html @@ -221,6 +221,12 @@ diff --git a/blog/2016/02/18/multi-room-audio-with-snapcast/index.html b/blog/2016/02/18/multi-room-audio-with-snapcast/index.html index a438d36438..e5e3eaca05 100644 --- a/blog/2016/02/18/multi-room-audio-with-snapcast/index.html +++ b/blog/2016/02/18/multi-room-audio-with-snapcast/index.html @@ -323,6 +323,12 @@ output = audioresample ! audio/x-raw,rate=48000,channels=2,format=S16LE ! audioc diff --git a/blog/2016/02/20/community-highlights/index.html b/blog/2016/02/20/community-highlights/index.html index 769fcc0f86..13a6d33045 100644 --- a/blog/2016/02/20/community-highlights/index.html +++ b/blog/2016/02/20/community-highlights/index.html @@ -231,6 +231,12 @@ Hold your NFC tag against the belly of Garfield to unlock the alarm. diff --git a/blog/2016/02/27/steam-d-link-smart-plugs-and-neurio-energy-sensors/index.html b/blog/2016/02/27/steam-d-link-smart-plugs-and-neurio-energy-sensors/index.html index 62e4570629..8849185ae5 100644 --- a/blog/2016/02/27/steam-d-link-smart-plugs-and-neurio-energy-sensors/index.html +++ b/blog/2016/02/27/steam-d-link-smart-plugs-and-neurio-energy-sensors/index.html @@ -220,6 +220,12 @@ diff --git a/blog/2016/03/12/z-wave-pep257-templated-service-calls/index.html b/blog/2016/03/12/z-wave-pep257-templated-service-calls/index.html index 282c829df9..131102306d 100644 --- a/blog/2016/03/12/z-wave-pep257-templated-service-calls/index.html +++ b/blog/2016/03/12/z-wave-pep257-templated-service-calls/index.html @@ -226,6 +226,12 @@ player state attributes. This change affects automations, scripts and scenes. +
  • + PocketCHIP running Home Assistant +
    • + + +
  • 0.23: Envisalink, Homematic, HDMI-CEC and Sony Bravia TV
    • @@ -249,12 +255,6 @@ player state attributes. This change affects automations, scripts and scenes. - -
  • - 0.21: Improved Web and support for EnOcean, LIRC and Osram Lightify -
    • - - diff --git a/blog/2016/03/26/embedded-mqtt-broker-uber-yamaha-growl/index.html b/blog/2016/03/26/embedded-mqtt-broker-uber-yamaha-growl/index.html index 1484a05d62..eef83472bd 100644 --- a/blog/2016/03/26/embedded-mqtt-broker-uber-yamaha-growl/index.html +++ b/blog/2016/03/26/embedded-mqtt-broker-uber-yamaha-growl/index.html @@ -237,6 +237,12 @@ diff --git a/blog/2016/04/05/your-hub-should-be-local-and-open/index.html b/blog/2016/04/05/your-hub-should-be-local-and-open/index.html index 4b7dc6e4a5..662bf1c353 100644 --- a/blog/2016/04/05/your-hub-should-be-local-and-open/index.html +++ b/blog/2016/04/05/your-hub-should-be-local-and-open/index.html @@ -189,6 +189,12 @@ diff --git a/blog/2016/04/07/static-website/index.html b/blog/2016/04/07/static-website/index.html index ecc2caa0fc..2cabfdb816 100644 --- a/blog/2016/04/07/static-website/index.html +++ b/blog/2016/04/07/static-website/index.html @@ -195,6 +195,12 @@ diff --git a/blog/2016/04/09/onkyo-panasonic-gtfs-and-config-validation/index.html b/blog/2016/04/09/onkyo-panasonic-gtfs-and-config-validation/index.html index 51bf47c75d..07209b6da2 100644 --- a/blog/2016/04/09/onkyo-panasonic-gtfs-and-config-validation/index.html +++ b/blog/2016/04/09/onkyo-panasonic-gtfs-and-config-validation/index.html @@ -203,6 +203,12 @@ diff --git a/blog/2016/04/17/updated-documentation/index.html b/blog/2016/04/17/updated-documentation/index.html index 9a144ba512..30d04afa53 100644 --- a/blog/2016/04/17/updated-documentation/index.html +++ b/blog/2016/04/17/updated-documentation/index.html @@ -187,6 +187,12 @@ diff --git a/blog/2016/04/19/to-infinity-and-beyond/index.html b/blog/2016/04/19/to-infinity-and-beyond/index.html index 250770b77f..ffd841f5f6 100644 --- a/blog/2016/04/19/to-infinity-and-beyond/index.html +++ b/blog/2016/04/19/to-infinity-and-beyond/index.html @@ -204,6 +204,12 @@ diff --git a/blog/2016/04/20/bluetooth-lg-webos-tvs-and-roombas/index.html b/blog/2016/04/20/bluetooth-lg-webos-tvs-and-roombas/index.html index 69d3bda95a..314e66f3c6 100644 --- a/blog/2016/04/20/bluetooth-lg-webos-tvs-and-roombas/index.html +++ b/blog/2016/04/20/bluetooth-lg-webos-tvs-and-roombas/index.html @@ -222,6 +222,12 @@ diff --git a/blog/2016/04/30/ibeacons-part-1-making-presence-detection-work-better/index.html b/blog/2016/04/30/ibeacons-part-1-making-presence-detection-work-better/index.html index 2dcf80bc77..64ecd36f01 100644 --- a/blog/2016/04/30/ibeacons-part-1-making-presence-detection-work-better/index.html +++ b/blog/2016/04/30/ibeacons-part-1-making-presence-detection-work-better/index.html @@ -313,6 +313,12 @@ For example, my wife works next door - and I couldn’t detect whether she’s a diff --git a/blog/2016/05/06/open-iot-summit-talk/index.html b/blog/2016/05/06/open-iot-summit-talk/index.html index bc14f63d8e..39c03d550c 100644 --- a/blog/2016/05/06/open-iot-summit-talk/index.html +++ b/blog/2016/05/06/open-iot-summit-talk/index.html @@ -185,6 +185,12 @@ diff --git a/blog/2016/05/07/empowering-scripts-and-alexa/index.html b/blog/2016/05/07/empowering-scripts-and-alexa/index.html index 798204bb22..2959f63e86 100644 --- a/blog/2016/05/07/empowering-scripts-and-alexa/index.html +++ b/blog/2016/05/07/empowering-scripts-and-alexa/index.html @@ -275,6 +275,12 @@ diff --git a/blog/2016/05/12/video-configuring-home-assistant/index.html b/blog/2016/05/12/video-configuring-home-assistant/index.html index d69286383b..6206c827dc 100644 --- a/blog/2016/05/12/video-configuring-home-assistant/index.html +++ b/blog/2016/05/12/video-configuring-home-assistant/index.html @@ -185,6 +185,12 @@ diff --git a/blog/2016/05/18/why-we-use-polymer/index.html b/blog/2016/05/18/why-we-use-polymer/index.html index 2d2820eba1..ac1f5f4b7e 100644 --- a/blog/2016/05/18/why-we-use-polymer/index.html +++ b/blog/2016/05/18/why-we-use-polymer/index.html @@ -199,6 +199,12 @@ diff --git a/blog/2016/05/21/release-020/index.html b/blog/2016/05/21/release-020/index.html index 163ae34a52..e443020c43 100644 --- a/blog/2016/05/21/release-020/index.html +++ b/blog/2016/05/21/release-020/index.html @@ -220,6 +220,12 @@ diff --git a/blog/2016/05/22/get-started-with-all-in-one-installer/index.html b/blog/2016/05/22/get-started-with-all-in-one-installer/index.html index a7e3cb5cd4..fbfceefe59 100644 --- a/blog/2016/05/22/get-started-with-all-in-one-installer/index.html +++ b/blog/2016/05/22/get-started-with-all-in-one-installer/index.html @@ -191,6 +191,12 @@ diff --git a/blog/2016/05/26/ibeacons-how-to-track-things-that-cant-track-themselves-part-ii/index.html b/blog/2016/05/26/ibeacons-how-to-track-things-that-cant-track-themselves-part-ii/index.html index 3a1454db66..22056dbdbf 100644 --- a/blog/2016/05/26/ibeacons-how-to-track-things-that-cant-track-themselves-part-ii/index.html +++ b/blog/2016/05/26/ibeacons-how-to-track-things-that-cant-track-themselves-part-ii/index.html @@ -329,6 +329,12 @@ diff --git a/blog/2016/06/01/community-highlights/index.html b/blog/2016/06/01/community-highlights/index.html index ca124bdd39..5f61ba941e 100644 --- a/blog/2016/06/01/community-highlights/index.html +++ b/blog/2016/06/01/community-highlights/index.html @@ -205,6 +205,12 @@ diff --git a/blog/2016/06/08/super-fast-web-enocean-lirc/index.html b/blog/2016/06/08/super-fast-web-enocean-lirc/index.html index c7e31ea217..d6c032b8b0 100644 --- a/blog/2016/06/08/super-fast-web-enocean-lirc/index.html +++ b/blog/2016/06/08/super-fast-web-enocean-lirc/index.html @@ -239,6 +239,12 @@ diff --git a/blog/2016/06/13/home-assistant-at-pycon-2016/index.html b/blog/2016/06/13/home-assistant-at-pycon-2016/index.html index 4d61275d95..527f6086b1 100644 --- a/blog/2016/06/13/home-assistant-at-pycon-2016/index.html +++ b/blog/2016/06/13/home-assistant-at-pycon-2016/index.html @@ -210,6 +210,12 @@ diff --git a/blog/2016/06/18/pandora-bt-home-hub-5-and-local-file-camera/index.html b/blog/2016/06/18/pandora-bt-home-hub-5-and-local-file-camera/index.html index 459407a690..19ac5c4530 100644 --- a/blog/2016/06/18/pandora-bt-home-hub-5-and-local-file-camera/index.html +++ b/blog/2016/06/18/pandora-bt-home-hub-5-and-local-file-camera/index.html @@ -234,6 +234,12 @@ diff --git a/blog/2016/06/23/usb-webcams-and-home-assistant/index.html b/blog/2016/06/23/usb-webcams-and-home-assistant/index.html index 25bd9d8690..27c2f155f7 100644 --- a/blog/2016/06/23/usb-webcams-and-home-assistant/index.html +++ b/blog/2016/06/23/usb-webcams-and-home-assistant/index.html @@ -300,6 +300,12 @@ target_dir /tmp diff --git a/blog/2016/07/01/envisalink-homematic-hdmi-cec-and-sony-bravia-tv/index.html b/blog/2016/07/01/envisalink-homematic-hdmi-cec-and-sony-bravia-tv/index.html index 596568dd1f..a877aeeb55 100644 --- a/blog/2016/07/01/envisalink-homematic-hdmi-cec-and-sony-bravia-tv/index.html +++ b/blog/2016/07/01/envisalink-homematic-hdmi-cec-and-sony-bravia-tv/index.html @@ -233,6 +233,12 @@ diff --git a/blog/2016/07/06/pocketchip-running-home-assistant/index.html b/blog/2016/07/06/pocketchip-running-home-assistant/index.html new file mode 100644 index 0000000000..06ea224962 --- /dev/null +++ b/blog/2016/07/06/pocketchip-running-home-assistant/index.html @@ -0,0 +1,315 @@ + + + + + + + + + + PocketCHIP running Home Assistant - Home Assistant + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    +
    +
    + +
    + + + Home Assistant + +
    + +
    + +
    + +
    +
    +
    + + + +
    +
    + +
    + + +
    + +
    + +

    PocketCHIP running Home Assistant

    + + + +
    + + Fabian Affolter + two minutes reading time + + + + + + Comments + +
    + +
    + + +


    +Over a year ago I participated in the kickstarter campain for “CHIP - The World’s First Nine Dollar Computer” by Next Thing Co.. I went for the PocketCHIP because of the idea. Display, built-in storage (thus no need for SD cards), battery-powered, and a keyboard are pretty nice features. Last week a package arrives…

    + + + +

    Thanks to Next Thing Co. and their CHIP which is actually 9 USD the space requirement for a single board computer has decreased. No ethernet and HDMI output helped with that. But I guess that the next development cycle will allow us to put those boards in a matchbox including wired networking and a SATA interface.

    + +

    + + Size comparison of a Cubieboard, OrangePi One, and CHIP. +

    + +

    If you start using a PocketCHIP you will definitly look like a Blackberry or a GameBoy user. Typing is done with your thumbs :-)

    + +

    First a couple of tweaks like setting up sudo, upgradeing the existing installation, change passwords, enabling ssh, and removal of the annoying stuff then installation of Home Assistant. There is not much to tell…it’s straight-forward. For the sake of completeness below the notes about what I did.

    + +

    A Debian installation is available by default. This means that some dependencies for Home Assistant are missing. I haven’t checked if a new build for the PocketCHIP would include them. So, after a $ sudo apt-get update installing those dependencies take a minute or two.

    + +
    + 
    $ sudo apt-get install python3-dev python3-pip python3-venv
+
    +
    +
    + +

    As usual I run Python applications in a venv.

    + +
    + 
    $ pvenv ha
+
    +
    +
    + +

    Let’s activate the created environment.

    + +
    + 
    $ cd ha
+$ source bin/activate
+
    +
    +
    + +

    If you haven’t seen the next two commands already then you should definitiy visit our frontsite.

    + +
    + 
    $ pip3 install homeassistant
+$ hass --open-ui
+
    +
    +
    + +

    With surf the browsing experience on the low-resolution display is not that great. Most shartphones, even very cheap ones, have touchscreens with higher resolutions. Nevermind, midori is not better.

    + +

    + + PocketCHIP with Home Assistant frontend +

    + +

    Well, with PocketCHIP and Home Assistant you could run your home automation on a 49 USD device with a touchscreen, an integrated USP, and a keyboard. With the GPIO available on top of the display you could even connect your PocketCHIP directly to sensors and actuators.

    +
    + + +
    +

    Comments

    +
    +
    + + +
    + + + + +
    +
    + + + + + + + \ No newline at end of file diff --git a/blog/archives/index.html b/blog/archives/index.html index 900982a02d..9c5507a157 100644 --- a/blog/archives/index.html +++ b/blog/archives/index.html @@ -98,6 +98,38 @@

    2016

    + + + +
    @@ -2403,6 +2435,12 @@ diff --git a/blog/categories/community/atom.xml b/blog/categories/community/atom.xml index 358cca2515..d2aa8cc9f8 100644 --- a/blog/categories/community/atom.xml +++ b/blog/categories/community/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Community | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/community/index.html b/blog/categories/community/index.html index 8efe362e27..cd13295eb0 100644 --- a/blog/categories/community/index.html +++ b/blog/categories/community/index.html @@ -268,6 +268,12 @@ diff --git a/blog/categories/device-tracking/atom.xml b/blog/categories/device-tracking/atom.xml index 4ac5d3e74e..74c6de77c5 100644 --- a/blog/categories/device-tracking/atom.xml +++ b/blog/categories/device-tracking/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Device-Tracking | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/device-tracking/index.html b/blog/categories/device-tracking/index.html index 726ee806bf..212dc8861f 100644 --- a/blog/categories/device-tracking/index.html +++ b/blog/categories/device-tracking/index.html @@ -199,6 +199,12 @@ diff --git a/blog/categories/esp8266/atom.xml b/blog/categories/esp8266/atom.xml index e02c517237..c184d97979 100644 --- a/blog/categories/esp8266/atom.xml +++ b/blog/categories/esp8266/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: ESP8266 | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/esp8266/index.html b/blog/categories/esp8266/index.html index 926dbebd44..2681ee1a07 100644 --- a/blog/categories/esp8266/index.html +++ b/blog/categories/esp8266/index.html @@ -199,6 +199,12 @@ diff --git a/blog/categories/how-to/atom.xml b/blog/categories/how-to/atom.xml index a065fef3e4..3fe51cdb68 100644 --- a/blog/categories/how-to/atom.xml +++ b/blog/categories/how-to/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: How-To | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ @@ -13,6 +13,73 @@ Octopress + + <![CDATA[PocketCHIP running Home Assistant]]> + + 2016-07-06T05:00:00+00:00 + https://home-assistant.io/blog/2016/07/06/pocketchip-running-home-assistant +
    +Over a year ago I participated in the kickstarter campain for “CHIP - The World’s First Nine Dollar Computer” by Next Thing Co.. I went for the PocketCHIP because of the idea. Display, built-in storage (thus no need for SD cards), battery-powered, and a keyboard are pretty nice features. Last week a package arrives…

    + + + +

    Thanks to Next Thing Co. and their CHIP which is actually 9 USD the space requirement for a single board computer has decreased. No ethernet and HDMI output helped with that. But I guess that the next development cycle will allow us to put those boards in a matchbox including wired networking and a SATA interface.

    + +

    + + Size comparison of a Cubieboard, OrangePi One, and CHIP. +

    + +

    If you start using a PocketCHIP you will definitly look like a Blackberry or a GameBoy user. Typing is done with your thumbs :-)

    + +

    First a couple of tweaks like setting up sudo, upgradeing the existing installation, change passwords, enabling ssh, and removal of the annoying stuff then installation of Home Assistant. There is not much to tell…it’s straight-forward. For the sake of completeness below the notes about what I did.

    + +

    A Debian installation is available by default. This means that some dependencies for Home Assistant are missing. I haven’t checked if a new build for the PocketCHIP would include them. So, after a $ sudo apt-get update installing those dependencies take a minute or two.

    + +
    + 
    $ sudo apt-get install python3-dev python3-pip python3-venv
+
    +
    +
    + +

    As usual I run Python applications in a venv.

    + +
    + 
    $ pvenv ha
+
    +
    +
    + +

    Let’s activate the created environment.

    + +
    + 
    $ cd ha
+$ source bin/activate
+
    +
    +
    + +

    If you haven’t seen the next two commands already then you should definitiy visit our frontsite.

    + +
    + 
    $ pip3 install homeassistant
+$ hass --open-ui
+
    +
    +
    + +

    With surf the browsing experience on the low-resolution display is not that great. Most shartphones, even very cheap ones, have touchscreens with higher resolutions. Nevermind, midori is not better.

    + +

    + + PocketCHIP with Home Assistant frontend +

    + +

    Well, with PocketCHIP and Home Assistant you could run your home automation on a 49 USD device with a touchscreen, an integrated USP, and a keyboard. With the GPIO available on top of the display you could even connect your PocketCHIP directly to sensors and actuators.

    + +]]>     +     + <![CDATA[Using USB webcams with Home Assistant]]> @@ -555,115 +622,6 @@ Z-Wave light bulb |
  • Authentication for MQTT Bridge: Right now the bridge expects that anyone subscribing is the SmartThings hub. This could use proper authentication.
    • -]]> -     - - - <![CDATA[Set up encryption using Let's Encrypt]]> - - 2015-12-13T18:05:00+00:00 - https://home-assistant.io/blog/2015/12/13/setup-encryption-using-lets-encrypt - Exposing your Home Assistant instance outside of your network always has been tricky. You have to set up port forwarding on your router and most likely add a dynamic DNS service to work around your ISP changing your IP. After this you would be able to use Home Assistant from anywhere but there is one big red flag: no encryption.

    - -

    This tutorial will take you through the steps to setup a dynamic DNS for your IP and allow trusted encrypted connection to it - for free using DuckDNS and Let’s Encrypt.

    - -

    - -

    - - - -

    Updated 2016-06-18

    - -

    Requirements

    - -

    The DuckDNS part of this tutorial has no requirements but there are a few requirements as of now to run the Let’s Encrypt client.

    - -
      -
    • Direct connection to the internet or admin access to your router to set up port forwarding.
      • -
    • A machine running a Unix-ish OS that include Python 2.6 or 2.7 (Docker can be used).
      • -
    • Root access, to write to default config, log and library directories and bind port 80.
      • -
    - -

    - -

    DuckDNS

    - -

    The first step is to set up DuckDNS. This is a free dynamic DNS service that you can use to get a DuckDNS.org subdomain to point at your house. A dynamic DNS service works by having your home computer tell DuckDNS.org every 5 minutes what its IP is so that DuckDNS can make sure your domain name is set up correctly.

    - -

    For this example we will assume our domain is hass-example.duckdns.org.

    - -

    First step is to acquire and set up our domain name. For this, go to DuckDNS, log in with any of the supported login providers and add a domain. After this check out their installation instructions to finish your installation of DuckDNS. If you’re on a Raspberry Pi, see ‘Pi’ in the category ‘Operating Systems’.

    - -

    - -

    Let’s Encrypt

    - -

    Let’s Encrypt is a free, automated, and open certificate authority (CA). We will use this to acquire a certificate that can be used to encrypted our connection with Home Assistant.

    - -

    Let’s Encrypt will give you a free 90-day certificate if you pass their domain validation challenge. Domains are validated by having certain data be accessible on your domain for Let’s Encrypt (they describe it better themselves).

    - -

    Assuming that your home is behind a router, the first thing to do is to set up port forwarding from your router to your computer that will run Let’s Encrypt. For the Let’s Encrypt set up we need to forward external port 80 to internal port 80 (http connections). This can be set up by accessing your router admin interface (Site with port forwarding instructions per router). This port forward must be active whenever you want to request a new certificate from Let’s Encrypt, typically every three months. If you normally don’t use or have an app that listens to port 80, it should be safe to leave the port open. This will make renewing certificates easier.

    - -

    Now you’re ready to install and run the client that requests certificates from Let’s Encrypt. The following example will use the platform independent script to install and run the certbot client from Let’s Encrypt. If there is a certbot package for your OS, it’s recommended to install the package instead of the platform independent script. Read the docs for more information. There are also other clients that might offer more customization and options. See the client options page at Let’s Encrypt.

    - -
    - 
    $ mkdir certbot
-$ cd certbot/
-$ wget https://dl.eff.org/certbot-auto
-$ chmod a+x certbot-auto
-$ ./certbot-auto certonly --standalone \
-                          --standalone-supported-challenges http-01 \
-                          --email your@email.address \
-                          -d hass-example.duckdns.org
-
    -
    -
    - -

    If you’re using Docker, run the following command to generate the required keys:

    - -
    - 
    sudo mkdir /etc/letsencrypt /var/lib/letsencrypt
-sudo docker run -it --rm -p 80:80 --name certbot \
-                -v "/etc/letsencrypt:/etc/letsencrypt" \
-                -v "/var/lib/letsencrypt:/var/lib/letsencrypt" \
-                quay.io/letsencrypt/letsencrypt:latest certonly \
-                --standalone --standalone-supported-challenges http-01 \
-                --email your@email.address -d hass-example.duckdns.org
-
    -
    -
    - -

    With either method your certificate will be generated and put in the directory /etc/letsencrypt/live/hass-example.duckdns.org. As the lifetime is only 90 days, you will have to repeat this every 90 days. There’s a special command to simplify renewing certificates:

    - -
    - 
    ./certbot-auto renew --quiet --no-self-upgrade --standalone \
-                     --standalone-supported-challenges http-01
-
    -
    -
    - -

    - -

    Home Assistant

    - -

    Before updating the Home Assistant configuration, we have to forward port 443 (https connections) to port 8123 on the computer that will run Home Assistant. Do this in your router configuration as previously done for port 80.

    - -

    The final step is to point Home Assistant at the generated certificates. Before you do this, make sure that the user running Home Assistant has read access to the folder that holds the certificates.

    - -
    - 
    http:
-  api_password: YOUR_SECRET_PASSWORD
-  ssl_certificate: /etc/letsencrypt/live/hass-example.duckdns.org/fullchain.pem
-  ssl_key: /etc/letsencrypt/live/hass-example.duckdns.org/privkey.pem
-
    -
    -
    - -

    You can now navigate to https://hass-example.duckdns.org and enjoy encryption!

    - -

    Big thanks to Fabian Affolter for his help and feedback on this article.

    - ]]>         diff --git a/blog/categories/how-to/index.html b/blog/categories/how-to/index.html index 90940b3a07..0ed922203c 100644 --- a/blog/categories/how-to/index.html +++ b/blog/categories/how-to/index.html @@ -98,6 +98,38 @@

    2016

    + + + +
    @@ -528,6 +560,12 @@ diff --git a/blog/categories/ibeacons/atom.xml b/blog/categories/ibeacons/atom.xml index 369d616478..0d0e326fa7 100644 --- a/blog/categories/ibeacons/atom.xml +++ b/blog/categories/ibeacons/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: iBeacons | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/ibeacons/index.html b/blog/categories/ibeacons/index.html index 48b7f05a23..eb424622cd 100644 --- a/blog/categories/ibeacons/index.html +++ b/blog/categories/ibeacons/index.html @@ -235,6 +235,12 @@ diff --git a/blog/categories/internet-of-things/atom.xml b/blog/categories/internet-of-things/atom.xml index 7e161b7235..2457c6e836 100644 --- a/blog/categories/internet-of-things/atom.xml +++ b/blog/categories/internet-of-things/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Internet-of-Things | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/internet-of-things/index.html b/blog/categories/internet-of-things/index.html index 0a8441658d..7ede92c59f 100644 --- a/blog/categories/internet-of-things/index.html +++ b/blog/categories/internet-of-things/index.html @@ -294,6 +294,12 @@ diff --git a/blog/categories/mqtt/atom.xml b/blog/categories/mqtt/atom.xml index f456abf4db..ba9a891223 100644 --- a/blog/categories/mqtt/atom.xml +++ b/blog/categories/mqtt/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: MQTT | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/mqtt/index.html b/blog/categories/mqtt/index.html index feb045faf5..dc3671e11d 100644 --- a/blog/categories/mqtt/index.html +++ b/blog/categories/mqtt/index.html @@ -270,6 +270,12 @@ diff --git a/blog/categories/organisation/atom.xml b/blog/categories/organisation/atom.xml index 5b562ab04f..0ac9ebad4d 100644 --- a/blog/categories/organisation/atom.xml +++ b/blog/categories/organisation/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Organisation | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/organisation/index.html b/blog/categories/organisation/index.html index aa3233662e..c031699d52 100644 --- a/blog/categories/organisation/index.html +++ b/blog/categories/organisation/index.html @@ -230,6 +230,12 @@ diff --git a/blog/categories/owntracks/atom.xml b/blog/categories/owntracks/atom.xml index 94816ae571..0c2e9157b0 100644 --- a/blog/categories/owntracks/atom.xml +++ b/blog/categories/owntracks/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: OwnTracks | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/owntracks/index.html b/blog/categories/owntracks/index.html index 09991c3aa5..7e1b18724d 100644 --- a/blog/categories/owntracks/index.html +++ b/blog/categories/owntracks/index.html @@ -235,6 +235,12 @@ diff --git a/blog/categories/presence-detection/atom.xml b/blog/categories/presence-detection/atom.xml index 7d949e05e9..24874bc39c 100644 --- a/blog/categories/presence-detection/atom.xml +++ b/blog/categories/presence-detection/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Presence-Detection | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/presence-detection/index.html b/blog/categories/presence-detection/index.html index 84680863d2..f52c32c970 100644 --- a/blog/categories/presence-detection/index.html +++ b/blog/categories/presence-detection/index.html @@ -199,6 +199,12 @@ diff --git a/blog/categories/public-service-announcement/atom.xml b/blog/categories/public-service-announcement/atom.xml index c4821135e3..82807a78cf 100644 --- a/blog/categories/public-service-announcement/atom.xml +++ b/blog/categories/public-service-announcement/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Public-Service-Announcement | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/public-service-announcement/index.html b/blog/categories/public-service-announcement/index.html index 9e3a660509..91b8b23fe9 100644 --- a/blog/categories/public-service-announcement/index.html +++ b/blog/categories/public-service-announcement/index.html @@ -195,6 +195,12 @@ diff --git a/blog/categories/release-notes/atom.xml b/blog/categories/release-notes/atom.xml index 20a96a8513..3af05efae2 100644 --- a/blog/categories/release-notes/atom.xml +++ b/blog/categories/release-notes/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Release-Notes | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/release-notes/index.html b/blog/categories/release-notes/index.html index 9ea90c328a..ff3a1fc224 100644 --- a/blog/categories/release-notes/index.html +++ b/blog/categories/release-notes/index.html @@ -1384,6 +1384,12 @@ diff --git a/blog/categories/survey/atom.xml b/blog/categories/survey/atom.xml index 244be74a65..401f1e9c3a 100644 --- a/blog/categories/survey/atom.xml +++ b/blog/categories/survey/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Survey | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/survey/index.html b/blog/categories/survey/index.html index 55e2b1b08c..7d0e472fa0 100644 --- a/blog/categories/survey/index.html +++ b/blog/categories/survey/index.html @@ -195,6 +195,12 @@ diff --git a/blog/categories/talks/atom.xml b/blog/categories/talks/atom.xml index 20d8c1f611..e5b62aca81 100644 --- a/blog/categories/talks/atom.xml +++ b/blog/categories/talks/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Talks | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/talks/index.html b/blog/categories/talks/index.html index 9be701d35d..8ac0a2fb8d 100644 --- a/blog/categories/talks/index.html +++ b/blog/categories/talks/index.html @@ -197,6 +197,12 @@ diff --git a/blog/categories/technology/atom.xml b/blog/categories/technology/atom.xml index 9b33cdfe90..6e0b987257 100644 --- a/blog/categories/technology/atom.xml +++ b/blog/categories/technology/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Technology | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/technology/index.html b/blog/categories/technology/index.html index 436b39f282..5489690f53 100644 --- a/blog/categories/technology/index.html +++ b/blog/categories/technology/index.html @@ -195,6 +195,12 @@ diff --git a/blog/categories/user-stories/atom.xml b/blog/categories/user-stories/atom.xml index 10df45ae8d..829d7489d4 100644 --- a/blog/categories/user-stories/atom.xml +++ b/blog/categories/user-stories/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: User-Stories | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/user-stories/index.html b/blog/categories/user-stories/index.html index 2fd73ad97b..efe93abd45 100644 --- a/blog/categories/user-stories/index.html +++ b/blog/categories/user-stories/index.html @@ -195,6 +195,12 @@ diff --git a/blog/categories/video/atom.xml b/blog/categories/video/atom.xml index 9fe9061372..32638d51a6 100644 --- a/blog/categories/video/atom.xml +++ b/blog/categories/video/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Video | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/video/index.html b/blog/categories/video/index.html index 7735100722..32b6ddd174 100644 --- a/blog/categories/video/index.html +++ b/blog/categories/video/index.html @@ -398,6 +398,12 @@ diff --git a/blog/categories/website/atom.xml b/blog/categories/website/atom.xml index b668c222c0..fc66340da3 100644 --- a/blog/categories/website/atom.xml +++ b/blog/categories/website/atom.xml @@ -4,7 +4,7 @@ <![CDATA[Category: Website | Home Assistant]]> - 2016-07-05T20:43:16+00:00 + 2016-07-06T06:19:25+00:00 https://home-assistant.io/ diff --git a/blog/categories/website/index.html b/blog/categories/website/index.html index 687e82e554..1c0dfb0a4e 100644 --- a/blog/categories/website/index.html +++ b/blog/categories/website/index.html @@ -230,6 +230,12 @@ diff --git a/blog/index.html b/blog/index.html index 44bfc29aae..5a3c955069 100644 --- a/blog/index.html +++ b/blog/index.html @@ -78,6 +78,51 @@ +
    +
    + +

    + PocketCHIP running Home Assistant +

    + + + +
    + + Fabian Affolter + two minutes reading time + + + + + + Comments + +
    + +
    + + +
    +


    +Over a year ago I participated in the kickstarter campain for “CHIP - The World’s First Nine Dollar Computer” by Next Thing Co.. I went for the PocketCHIP because of the idea. Display, built-in storage (thus no need for SD cards), battery-powered, and a keyboard are pretty nice features. Last week a package arrives…

    + + + + Read on → + +
    +
    +
    +
    @@ -744,56 +789,6 @@ In the past month I was thinking about ways to integrate USB webcams into Home A -
    -
    -
    - -
    -
    - -

    - Why we use web components and Polymer -

    - - - -
    - - Paulus Schoutsen - three minutes reading time - - - - - - Comments - -
    - -
    - - -
    -

    I’ve been planning to write this post for a while now as we get questions like this a lot: “Why does Home Assistant use Polymer? Why not React, Redux and what not?”

    - -

    It’s understandable, Polymer is quite the underdog in the world of web frameworks. A corporate backer does not guarantee popularity or an active community and this shows in the number of projects using Polymer.

    - -

    Still, we use Polymer and it’s awesome. To explain why, I’ll be referencing the React workflow quite a bit, as they do a lot of things right, and show how it is done in Polymer.

    - -

    Polymer gives us components for the web, just like React, but based on web standards: web components, CSS variables. These standards don’t have wide browser support yet but it’s being implemented by every major browser: It’s the future. For now they are being polyfilled and that works just fine but in the future the Home Assistant web app will be able to run native in the browsers == fast.

    - - - - Read on → -
    diff --git a/blog/posts/2/index.html b/blog/posts/2/index.html index 96e86c0710..660ee02300 100644 --- a/blog/posts/2/index.html +++ b/blog/posts/2/index.html @@ -78,6 +78,56 @@ +
    +
    + +

    + Why we use web components and Polymer +

    + + + +
    + + Paulus Schoutsen + three minutes reading time + + + + + + Comments + +
    + +
    + + +
    +

    I’ve been planning to write this post for a while now as we get questions like this a lot: “Why does Home Assistant use Polymer? Why not React, Redux and what not?”

    + +

    It’s understandable, Polymer is quite the underdog in the world of web frameworks. A corporate backer does not guarantee popularity or an active community and this shows in the number of projects using Polymer.

    + +

    Still, we use Polymer and it’s awesome. To explain why, I’ll be referencing the React workflow quite a bit, as they do a lot of things right, and show how it is done in Polymer.

    + +

    Polymer gives us components for the web, just like React, but based on web standards: web components, CSS variables. These standards don’t have wide browser support yet but it’s being implemented by every major browser: It’s the future. For now they are being polyfilled and that works just fine but in the future the Home Assistant web app will be able to run native in the browsers == fast.

    + + + + Read on → + +
    +
    +
    +
    -
    -
    - -
    -
    - -

    - Your hub should be local and open -

    - - - -
    - - Paulus Schoutsen - 1 minute reading time - - - - - - Comments - -
    - -
    - - -
    -

    Today the news spread that Google will be shutting down the Revolv hubs. And shutting down here doesn’t mean they stop selling or supporting them - no, they are sending an update to each hub to turn your perfectly fine home automation hub into a useless piece of plastic. The fact that this seemed like a good idea by Google astonishes me. If anything, they should have gone the same route as ninjasphere: open it all up and let people decide on the fate of their own hub.

    - -

    I’ve said it before but I’ll repeat it again:

    - -
    -

    The cloud should be treated as an extension to your smart home instead of running it.

    -
    - -

    Your hub should not be affected when your internet breaks down or the company that sold you your hub goes out of business. It should work locally so that it can continue to work even long after the vendor goes out of business or decides to kill it. Preferably, your hub should also be open so that the community can take over development after the vendor stops caring.

    - -

    Unless you can afford losing a product here and there, be cautious when buying IoT products that depend on the cloud from companies that are not well established. The chances are high that they go bankrupt or get acquired and closed. This however is easier said than done as Gartner predicts that by 2017, 50 percent of IoT solutions will originate in startups that are less than three years old.

    - - -
    diff --git a/blog/posts/3/index.html b/blog/posts/3/index.html index a39083fa9e..a7ca4f005a 100644 --- a/blog/posts/3/index.html +++ b/blog/posts/3/index.html @@ -78,6 +78,58 @@ +
    +
    + +

    + Your hub should be local and open +

    + + + +
    + + Paulus Schoutsen + 1 minute reading time + + + + + + Comments + +
    + +
    + + +
    +

    Today the news spread that Google will be shutting down the Revolv hubs. And shutting down here doesn’t mean they stop selling or supporting them - no, they are sending an update to each hub to turn your perfectly fine home automation hub into a useless piece of plastic. The fact that this seemed like a good idea by Google astonishes me. If anything, they should have gone the same route as ninjasphere: open it all up and let people decide on the fate of their own hub.

    + +

    I’ve said it before but I’ll repeat it again:

    + +
    +

    The cloud should be treated as an extension to your smart home instead of running it.

    +
    + +

    Your hub should not be affected when your internet breaks down or the company that sold you your hub goes out of business. It should work locally so that it can continue to work even long after the vendor goes out of business or decides to kill it. Preferably, your hub should also be open so that the community can take over development after the vendor stops caring.

    + +

    Unless you can afford losing a product here and there, be cautious when buying IoT products that depend on the cloud from companies that are not well established. The chances are high that they go bankrupt or get acquired and closed. This however is easier said than done as Gartner predicts that by 2017, 50 percent of IoT solutions will originate in startups that are less than three years old.

    + + + +
    +
    +
    +
    @@ -821,58 +873,6 @@ Example of the new views in the frontend. Learn mor
    -
    -
    - -

    - Perfect Home Automation -

    - - - -
    - - Paulus Schoutsen - five minutes reading time - - - - - - Comments - -
    - -
    - - -
    -

    People often ask me about my vision for Home Assistant. Before I can describe where I want to go with Home Assistant, I should first talk about how home automation would look in my ideal world. This will be the aim of this post. I’m not going to focus on protocols, networks or specific hubs. That’s all implementation details. Instead, this post will focus on what is most important: the interaction between the users and their home.

    - -

    You should not have to adapt to technology.

    - -

    When people start using home automation, they always experience home control first: being able to control devices in new ways using a phone or computer. They believe the future is now and their app will be their remote for their lives. They only focus on what they are getting, not on what they are losing. You install some light bulbs and all of a sudden you are no longer able to use the light switches. You’ll arrive at home at night and have to pull out your phone, open the app, let it connect and finally you’ll be able to turn on the light. All while turning the light on could have been a switch away.

    - -

    Yes, you can solve this with presence detection. What if your phone runs out of battery? You’ll have to resort to the switch again.

    - -

    If you find that using your new home devices is cumbersome, the promise of home automation technology has failed you. Your lights should work with both a switch (or button) at the entrance of your room and via presence detection. Honestly, there are hardly any valid use cases for being able to control lights from your phone except for showing off.

    - - - - Read on → - -
    -
    -
    - - -
    - -
    -
    - -

    - 0.8: Honeywell Thermostats, Orvibo switches and Z-Wave switches and lights -

    - - - -
    - - Paulus Schoutsen - 1 minute reading time - - - - - - Comments - -
    - -
    - - -
    -

    We have all been hard at work to get this latest release ready. One of the big highlights in this release is the introduction of an extended iconset to be used in the frontend (credits to @happyleavesaoc for idea and prototype). To get started with customizing, pick any icon from MaterialDesignIcons.com, prefix the name with mdi: and stick it into your customize section in configuration.yaml:

    - -
    - 
    homeassistant:
-  customize:
-    switch.ac:
-      icon: 'mdi:air-conditioner'
-
    -
    -
    - -

    Breaking changes

    - -
      -
    • Any existing zone icon will have to be replaced with one from MaterialDesignIcons.com.
      • -
    • LimitlessLED light services require colors to be specified in RGB instead of XY.
      • -
    - -

    Changes

    - -

    - - - - -
    diff --git a/blog/posts/5/index.html b/blog/posts/5/index.html index 6991171303..d5eef3bee9 100644 --- a/blog/posts/5/index.html +++ b/blog/posts/5/index.html @@ -78,6 +78,85 @@ +
    +
    + +

    + 0.8: Honeywell Thermostats, Orvibo switches and Z-Wave switches and lights +

    + + + +
    + + Paulus Schoutsen + 1 minute reading time + + + + + + Comments + +
    + +
    + + +
    +

    We have all been hard at work to get this latest release ready. One of the big highlights in this release is the introduction of an extended iconset to be used in the frontend (credits to @happyleavesaoc for idea and prototype). To get started with customizing, pick any icon from MaterialDesignIcons.com, prefix the name with mdi: and stick it into your customize section in configuration.yaml:

    + +
    + 
    homeassistant:
+  customize:
+    switch.ac:
+      icon: 'mdi:air-conditioner'
+
    +
    +
    + +

    Breaking changes

    + +
      +
    • Any existing zone icon will have to be replaced with one from MaterialDesignIcons.com.
      • +
    • LimitlessLED light services require colors to be specified in RGB instead of XY.
      • +
    + +

    Changes

    + +

    + + + + + +
    +
    +
    +
    @@ -615,63 +694,6 @@ Inspried by a -
    - -

    - Laundry Automation: insight and notifications -

    - - - -
    - - Nolan Gilley - four minutes reading time - - - - - - Comments - -
    - -
    - - -
    -

    This is a guest post by Home Assistant user and contributor Nolan Gilley.

    - -

    In our house, laundry has been a struggle for quite some time. Our washer and dryer both lack a buzzer which leads to forgotten laundry, and stinky mess that needs to be rewashed. I decided to create a solution by monitoring the washer and dryer myself with some cheap electronics.

    - -

    As an avid user of Home Assistant, I decided it would be the perfect application to manage the UI and notification system. Now all I needed was a way to monitor the washer and dryer. I tried using sound sensors but found them unreliable. I ended up opting for an accelerometer attached to the back of each appliance. I also added magnetic reed switches on the doors of the washer and dryer to detect if the doors are open or closed. I connected the accelerometers and reed switches to a Moteino, an arduino clone with an RF transceiver. The Moteino can perform the logic to figure out which state the appliances are in and wirelessly communicate that data with another Moteino that is connected via serial to my Raspberry Pi. The Raspberry Pi reads the serial data and repeats it over MQTT for Home Assistant to use. This is great because I don’t have to run Home Assistant on the Raspberry Pi. I can run it on a faster machine and point the MQTT component to my Raspberry Pi.

    - -

    After taking some sample data from the accelerometers while each appliance was in operation, I decided to plot the data to help determine the proper thresholds of when the devices were running or off. I had to do this in order to get precise ranges so the dryer sensor wouldn’t get tripped by the washer or vice versa. In the plot below you can see the acceleration in the x direction for the accelerometer connected to the washing machine. It’s easy to see when the washing machine is in operation here. I used the same technique for the dryer’s accelerometer.

    - -

    - - - - Graph showing the accelerometer data -

    - - - - Read on → - -
    -
    -
    - - - -
    - -
    -
    - -

    - New logo for Home Assistant -

    - - - -
    - - Paulus Schoutsen - less than one minute reading time - - - - - - Comments - -
    - -
    - - -
    -

    It is well known that you are either a good programmer or a good designer. It’s rare you’ll meet someone that is both. That’s why it wasn’t surprising to anyone that the logo that I made was mediocre — at best. Luckily, Jeremy Geltman has come to the rescue and contributed a brand new logo for Home Assistant.

    - -

    The new logo follows Googles material design spec. It uses the blue color that Home Assistant uses in the interface and it comes in two versions: a high detailed version (for homescreen icon etc) and a simple version (for favicon etc).

    - -

    - -The old logo, the new detailed logo and the new simple logo. -

    - -
    diff --git a/blog/posts/7/index.html b/blog/posts/7/index.html index 89040f4438..333eb385f8 100644 --- a/blog/posts/7/index.html +++ b/blog/posts/7/index.html @@ -78,6 +78,54 @@ +
    +
    + +

    + New logo for Home Assistant +

    + + + +
    + + Paulus Schoutsen + less than one minute reading time + + + + + + Comments + +
    + +
    + + +
    +

    It is well known that you are either a good programmer or a good designer. It’s rare you’ll meet someone that is both. That’s why it wasn’t surprising to anyone that the logo that I made was mediocre — at best. Luckily, Jeremy Geltman has come to the rescue and contributed a brand new logo for Home Assistant.

    + +

    The new logo follows Googles material design spec. It uses the blue color that Home Assistant uses in the interface and it comes in two versions: a high detailed version (for homescreen icon etc) and a simple version (for favicon etc).

    + +

    + +The old logo, the new detailed logo and the new simple logo. +

    + + +
    +
    +
    +
    diff --git a/images/blog/2016-07-pocketchip/pocketchip-logo.png b/images/blog/2016-07-pocketchip/pocketchip-logo.png new file mode 100644 index 0000000000..7b30de7e98 Binary files /dev/null and b/images/blog/2016-07-pocketchip/pocketchip-logo.png differ diff --git a/images/blog/2016-07-pocketchip/pocketchip.png b/images/blog/2016-07-pocketchip/pocketchip.png new file mode 100644 index 0000000000..71ad285ba3 Binary files /dev/null and b/images/blog/2016-07-pocketchip/pocketchip.png differ diff --git a/images/blog/2016-07-pocketchip/size.png b/images/blog/2016-07-pocketchip/size.png new file mode 100644 index 0000000000..062d1b8a9b Binary files /dev/null and b/images/blog/2016-07-pocketchip/size.png differ diff --git a/images/blog/2016-07-pocketchip/social.png b/images/blog/2016-07-pocketchip/social.png new file mode 100644 index 0000000000..17708364e2 Binary files /dev/null and b/images/blog/2016-07-pocketchip/social.png differ diff --git a/index.html b/index.html index c3ecbfe893..1e2aa3c29a 100644 --- a/index.html +++ b/index.html @@ -138,6 +138,11 @@ Home Assistant is an open-source home automation platform running on Python 3. T

    Recent Blog Posts

    +
  • + PocketCHIP running Home Assistant + July 06, 2016 +
    • +
  • 0.23: Envisalink, Homematic, HDMI-CEC and Sony Bravia TV July 1, 2016 @@ -148,11 +153,6 @@ Home Assistant is an open-source home automation platform running on Python 3. T June 23, 2016
    • -
  • - 0.22: Pandora, BT Home Hub 5 and local file camera. - June 18, 2016 -
    • - diff --git a/sitemap.xml b/sitemap.xml index 59ce18a2ef..7f0a94913b 100644 --- a/sitemap.xml +++ b/sitemap.xml @@ -1,5 +1,9 @@ + + https://home-assistant.io/blog/2016/07/06/pocketchip-running-home-assistant/ + 2016-07-06T05:00:00+00:00 + https://home-assistant.io/blog/2016/07/01/envisalink-homematic-hdmi-cec-and-sony-bravia-tv/ 2016-07-01T00:31:00+00:00 @@ -1899,28 +1903,31 @@ https://home-assistant.io/blog/2016/07/01/envisalink-homematic-hdmi-cec-and-sony-bravia-tv/ + + https://home-assistant.io/blog/2016/07/06/pocketchip-running-home-assistant/ + https://home-assistant.io/demo/frontend.html - 2016-07-05T20:42:38+00:00 + 2016-07-06T06:18:46+00:00 https://home-assistant.io/demo/index.html - 2016-07-05T20:42:38+00:00 + 2016-07-06T06:18:46+00:00 https://home-assistant.io/googlef4f3693c209fe788.html - 2016-07-05T20:42:38+00:00 + 2016-07-06T06:18:46+00:00 https://home-assistant.io/static/fonts/roboto/DESCRIPTION.en_us.html - 2016-07-05T20:42:38+00:00 + 2016-07-06T06:18:46+00:00 https://home-assistant.io/static/fonts/robotomono/DESCRIPTION.en_us.html - 2016-07-05T20:42:38+00:00 + 2016-07-06T06:18:46+00:00 https://home-assistant.io/static/mdi-demo.html - 2016-07-05T20:42:38+00:00 + 2016-07-06T06:18:46+00:00 diff --git a/topics/platform_options/index.html b/topics/platform_options/index.html index 3c4e4f5bd3..a687a54d1f 100644 --- a/topics/platform_options/index.html +++ b/topics/platform_options/index.html @@ -184,6 +184,12 @@