Home Assistant

aREST Sensor Support

The arest sensor platform allows you to get all data from your devices (like Arduinos with a ethernet/wifi connection, the ESP8266, and the Raspberry Pi) running the aREST RESTful framework.

To use your aREST enabled device in your installation, add the following to your configuration.yaml file:

1
2
3
4
5
6
7
8
9

# Example configuration.yaml entry
sensor:
  platform: arest
  resource: http://IP_ADDRESS
  monitored_variables:
    - name: temperature
      unit: '°C'
    - name: humidity
      unit: '%'

Configuration variables:

  • resource (Required): IP address and schema of the device that is exposing an aREST API, e.g. http://192.168.1.10.
  • monitored_variables array:
    • name (Required): The name of the variable you wish to monitor.
    • unit (Optional): Defines the units of measurement of the sensor, if any.

The variables in the monitored_variables array must be available in the response of the device. As a starting point you find below a sketch for the Arduino device family. There are two variables (temperature and humidity) which will act as endpoints.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58

/*
  This modified sketch is based on the Ethernet example of the aREST 
  (http://arest.io/) library.
*/

// Libraries
#include <SPI.h>
#include <Ethernet.h>
#include <aREST.h>
#include <avr/wdt.h>

// Device settings
char* deviceId = "sensor02";
char* deviceName = "livingroom";
byte deviceMac[] = { 0x20, 0xD5, 0xD3, 0x03, 0xFE, 0x31 };
IPAddress deviceIp(192, 168, 1, 12);

EthernetServer server(80);
aREST rest = aREST();

// Variables to be exposed to the API
int temperature;
int humidity;

void setup(void) {
  Serial.begin(57600);

  // Init variables and expose them to REST API
  temperature = 0;
  humidity = 0;

  rest.variable("temperature", &temperature);
  rest.variable("humidity", &humidity);

  // Give name and ID to device
  rest.set_id(deviceId);
  rest.set_name(deviceName);

  Ethernet.begin(deviceMac, deviceIp);

  server.begin();
  Serial.print("Sensor is ready...");

  // Start watchdog
  wdt_enable(WDTO_4S);
}

void loop() {
  EthernetClient client = server.available();
  rest.handle(client);
  wdt_reset();

  // Replace this with your actual sensor readings, like
  // temperature = (((analogRead(A0) * 5.0) / 1024) - 0.5) * 10;
  temperature = random(400);
  humidity = random(600);
  delay(500);
}

Accessing one of the endpoints (eg. http://192.168.1.10/temperature) will give you the value inside a JSON response.

1

{"temperature": 23, "id": "sensor01", "name": "livingroom", "connected": true}

The root will give you a JSON response that contains all variables and their current values along with some device details.

1
2
3
4
5
6
7
8
9

{
   "variables" : {
      "temperature" : 23,
      "humidity" : 82
   },
   "id" : "sensor01",
   "name" : "livingroom",
   "connected" : true
}