Home Assistant

Command Line Switch

A switch platform that issues specific commands when it is turned on and off. This might very well become our most powerful platform as it allows anyone to integrate any type of switch into Home Assistant that can be controlled from the command line, including calling other scripts!

To enable it, add the following lines to your configuration.yaml:

# Example configuration.yaml entry
switch:
  platform: command_line
  switches:
    kitchen_light:
      oncmd: switch_command on kitchen
      offcmd: switch_command off kitchen
      statecmd: query_command kitchen
      value_template: '{{ value == "online" }}'

Configuration variables:

  • switches (Required): The array that contains all command switches.
    • entry (Required): Name of the command switch. Multiple entries are possible.
      • oncmd (Required): The action to take for on.
      • offcmd (Required): The action to take for off.
      • statecmd (Optional): If given, this command will be run. Returning a result code 0 will indicate that the switch is on.
      • value_template (Optional): If specified, statecmd will ignore the result code of the command but the template evaluating to true will indicate the switch is on.

Examples

In this section you find some real life examples of how to use this switch.

aREST device

The example below is doing the same as the aREST switch. The commandline tool curl is used to toogle a pin which is controllable through REST.

# Example configuration.yaml entry
switch:
  platform: command_line
  switches:
    arest_pin4:
      oncmd: "/usr/bin/curl -X GET http://192.168.1.10/digital/4/1"
      offcmd: "/usr/bin/curl -X GET http://192.168.1.10/digital/4/0"

Shutdown your local host

This switch will shutdown your system that is hosting Home Assistant.

This switch will shutdown your host immediately, there will be no confirmation. 

# Example configuration.yaml entry
switch:
  platform: command_line
  switches:
    Home Assistant system shutdown:
      offcmd: "/usr/sbin/poweroff"

Control your VLC player

This switch will control a local VLC media player (Source).

# Example configuration.yaml entry
switch:
  platform: command_line
  switches:
    VLC:
      oncmd: "cvlc 1.mp3 vlc://quit &"
      offcmd: "pkill vlc"

Control Foscam Motion Sensor

This switch will control the motion sensor of Foscam Webcams which Support CGI Commands (Source). This switch supports statecmd, which checks the current state of motion detection.
yaml # Example configuration.yaml entry # Replace admin and password with an "Admin" priviledged Foscam user # Replace ipaddress with the local IP address of your Foscam switch: platform: command_line switches: foscam_motion: oncmd: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=1&usr=admin&pwd=password"' offcmd: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=0&usr=admin&pwd=password"' statecmd: 'curl -k --silent "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=getMotionDetectConfig&usr=admin&pwd=password" | grep -oP "(?<=isEnable>).*?(?=</isEnable>)"' value_template: ''