---
layout: component
title: "Heatmiser thermostat"
description: "Instructions how to integrate Heatmiser thermostats within Home Assistant."
date: 2015-12-11 12:35
sidebar: true
comments: false
sharing: true
footer: true
logo: heatmiser.png
ha_category: Thermostat
---


The heatmiser thermostat platform let you control [Heatmiser DT/DT-E/PRT/PRT-E](http://www.heatmisershop.co.uk/heatmiser-slimline-programmable-room-thermostat/) thermostats from Heatmiser.  The module itself is currently setup to work over a RS232 -> RS485 converter, therefore it connects over IP.

To set it up, add the following information to your `configuration.yaml` file:

```yaml
thermostat:
  platform: heatmiser
  ipaddress: YOUR_IPADDRESS
  port:  YOUR_PORT
  tstats:
    1:
    id: THERMOSTAT_ID
    name: THERMOSTAT_NAME
```

A single interface can handle up to 32 connected devices.

Configuration variables:

- **ipaddress** (*Required*): The ip address of your interface.
- **port** (*Required*): The port that the interface is listening on.
- **tstats** (*Required*): A list of thermostats activated on the gateway.
- **id** (*Required*): The id of the thermostat as configured on the device itself
- **name** (*Required*): A friendly name for the themostat