EnOcean Binary Sensor

This can typically be one of those batteryless wall switches. Currently only one type has been tested: Eltako FT55. Other devices will most likely not work without changing the Home-Asisstant code.

To use your EnOcean device, you first have to set up your EnOcean hub and then add the following to your configuration.yaml file:

# Example configuration.yaml entry
binary_sensor:
  - platform: enocean
    id: [0x01,0x90,0x84,0x3C]
    name: Door
    sensor_class: opening

Configuration variables:

• id (Required): The ID of the device. This is the 4 bytes long number written on the dimmer.
• name (Optional): An identifier for the Ligh in the frontend.
• sensor_class (Optional): The type/class of the sensor to set the icon in the frontend.