Home Assistant

KNX Cover

The knx cover platform is used as in interface with KNX covers.

To use your KNX covers in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
cover:
  - platform: knx
    updown_address: 9/0/0
    stop_address: 9/0/1
  • name (Optional): A name for this devices used within Home Assistant.
  • updown_address (Required): The KNX group address that is used to move the cover up and down.
  • stop_address (Required): The group address that is used to stop the cover.
  • setposition_address (Optional): The group address that is used to set the position.
  • getposition_address (Optional): The group address that is used to read the position.
  • setangle_address (Optional): The group address that is used to set the tilt angle.
  • getangle_address (Optional): The group address that is used to read the tilt angle.
  • invert_position (Optional): Set this to true if your actuator report fully closed as 100%
  • invert_angle (Optional): Set this to true if your actuator reports tilt fully closed as 100%