Heat Control

Heat Control is a thermostat implemented in Home Assistant. It uses a sensor and a switch connected to a heater under the hood. If the measured temperature is cooler then the target temperature, the heater will be turned on and turned off when required temperature is reached.

# Example configuration.yaml entry
thermostat:
  platform: heat_control
  name: Study
  heater: switch.study_heater
  target_sensor: sensor.study_temperature
  min_temp: 15
  max_temp: 21
  target_temp: 15

Configuration variables:

• name (Required): Name of thermostat
• heater (Required: entity_id for heater switch, must be a toggle device.
• target_sensor (Required): entity_id for a temperature sensor, target_sensor.state must be temperature.
• min_temp (Optional): Set minimum set point available (default: 7)
• max_temp (Optional): Set maximum set point available (default: 35)
• target_temp (Required): Set default target temperature. Failure to set this variable will result in target temperature being set to null on startup.