Home Assistant

Z-Wave Device Specific Settings

Aeon Minimote

Here’s a handy configuration for the Aeon Labs Minimote that defines all possible button presses. Put it into automation.yaml.

- alias: Minimote Button 1 Pressed
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 1

- alias: Minimote Button 1 Held
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 2

- alias: Minimote Button 2 Pressed
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 3

- alias: Minimote Button 2 Held
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 4

- alias: Minimote Button 3 Pressed
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 5

- alias: Minimote Button 3 Held
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 6

- alias: Minimote Button 4 Pressed
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 7

- alias: Minimote Button 4 Held
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 8
Aeotec MultiSensor 6

In order for Home Assistant to recognize well the motion sensor, you will need to change its configuration from Basic Set (default) to Binary Sensor report. Currently there’s no way to do this in Home Assistant but you can use ozwcp (OpenZWave control panel), Domoticz or similar to do it