general {
    # Define the lock command for hypridle
    # This is used whenever hypridle or listeners need to lock the screen
    lock_cmd = pidof hyprlock || hyprlock

    # Runs before system suspend (safety net if you manually suspend)
    # On a desktop, you can remove this if you never suspend manually
    before_sleep_cmd = ~/.config/hypr/scripts/lock.sh

    # Restore screen after sleep
    after_sleep_cmd = hyprctl dispatch dpms on
}

# Step 1: Dim monitor at 115 sec idle (warning that it will lock soon)
listener {
    timeout = 115
    # Only dims the screen, does not lock yet
    # This shows you that lock will happen soon
    on-timeout = dim
    on-resume = pkill -x dim
}

# Step 2: Lock screen at 2 min idle
listener {
    timeout = 120
    on-timeout = ~/.config/hypr/scripts/lock.sh
}

# Step 3: Turn screen off at 5 min idle
listener {
    timeout = 300
    on-timeout = hyprctl dispatch dpms off && ddcutil setvcp 10 0

    # Explanation:
    # - hyprctl dispatch dpms off → tells the compositor to power off the display (DPMS standby)
    # - ddcutil setvcp 10 0 → sets monitor brightness to 0 at the hardware level (safe for OLED)
    #
    # Both together ensure the screen is fully off visually and electrically

    # When the user becomes active again, restore display
    on-resume = hyprctl dispatch dpms on && ddcutil setvcp 10 100

    # Explanation:
    # - hyprctl dispatch dpms on → ensures the display is powered on by the compositor
    # - ddcutil setvcp 10 100 → restores monitor brightness to full
    # 
    # Both together guarantee the screen wakes reliably on all monitors
}

# Step 4: Suspend system after 30 min idle
listener {
    timeout = 1800
    on-timeout = systemctl suspend
}