Merge branch 'pr/101'

Conflicts:
	source/components/index.markdown

source/_components/sensor.mysensors.markdown

@@ -0,0 +1,39 @@
+---
+layout: page
+title: "MySensors sensors support"
+description: "Instructions how to integrate MySensors sensors into Home Assistant."
+date: 2015-05-14 21:57
+sidebar: false
+comments: false
+sharing: true
+footer: true
+logo: mysensors.png
+ha_category: Sensor
+---
+
+<img src='/images/supported_brands/mysensors.png' class='brand pull-right' />
+The [MySensors](https://www.mysensors.org) project combines Arduino boards with NRF24L01 radio boards to build sensor networks.
+
+Integrate your Serial MYSensors Gateway by adding the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+sensor:
+  platform: mysensors
+  port: /dev/ttyACM0
+```
+
+Configuration variables:
+
+- **port** (*Required*): The port where your board is connected to your Home Assistant host.
+- **debug** (*Optional*): Enable or disable verbose debug logging.
+- **persistence** (*Optional*): Enable or disable local persistence of sensor information. If this is disabled, then each sensor will need to send presentation messages after Home Assistant starts.
+- **persistence_file** (*Optional*): Path to a file to save sensor information. The file extension determines the file type. Currently supported file types are 'pickle' and 'json'.
+- **version** (*Optional*): Specifies the MySensors protocol version to use (ex. 1.4, 1.5).
+
+If you are using an original Arduino the port will be named `ttyACM*`. The exact number can be determined with the command shown below.
+
+```bash
+ls /dev/ttyACM*
+```
+