Move Z-Wave around

source/getting-started/z-wave-device-specific.markdown

@@ -0,0 +1,84 @@
+---
+layout: page
+title: "Z-Wave Device Specific Settings"
+description: "Extended instructions how to setup Z-Wave."
+date: 2016-03-24 08:49 -0700
+sidebar: true
+comments: false
+sharing: true
+footer: true
+---
+
+##### {% linkable_title Aeon Minimote %}
+
+Here's a handy configuration for the Aeon Labs Minimote that defines all possible button presses. Put it into `automation.yaml`.
+
+```yaml
+- alias: Minimote Button 1 Pressed
+  trigger:
+    platform: event
+    event_type: zwave.scene_activated
+    event_data:
+      entity_id: aeon_labs_minimote_1
+      scene_id: 1
+
+- alias: Minimote Button 1 Held
+  trigger:
+    platform: event
+    event_type: zwave.scene_activated
+    event_data:
+      entity_id: aeon_labs_minimote_1
+      scene_id: 2
+
+- alias: Minimote Button 2 Pressed
+  trigger:
+    platform: event
+    event_type: zwave.scene_activated
+    event_data:
+      entity_id: aeon_labs_minimote_1
+      scene_id: 3
+
+- alias: Minimote Button 2 Held
+  trigger:
+    platform: event
+    event_type: zwave.scene_activated
+    event_data:
+      entity_id: aeon_labs_minimote_1
+      scene_id: 4
+
+- alias: Minimote Button 3 Pressed
+  trigger:
+    platform: event
+    event_type: zwave.scene_activated
+    event_data:
+      entity_id: aeon_labs_minimote_1
+      scene_id: 5
+
+- alias: Minimote Button 3 Held
+  trigger:
+    platform: event
+    event_type: zwave.scene_activated
+    event_data:
+      entity_id: aeon_labs_minimote_1
+      scene_id: 6
+
+- alias: Minimote Button 4 Pressed
+  trigger:
+    platform: event
+    event_type: zwave.scene_activated
+    event_data:
+      entity_id: aeon_labs_minimote_1
+      scene_id: 7
+
+- alias: Minimote Button 4 Held
+  trigger:
+    platform: event
+    event_type: zwave.scene_activated
+    event_data:
+      entity_id: aeon_labs_minimote_1
+      scene_id: 8
+```
+
+##### {% linkable_title Aeotec MultiSensor 6 %}
+
+In order for Home Assistant to recognize well the motion sensor, you will need to change its configuration from `Basic Set (default)` to `Binary Sensor report`. Currently there's no way to do this in Home Assistant but you can use ozwcp (OpenZWave control panel), Domoticz or similar to do it