Add component collection

source/components/switch.arduino.markdown

@@ -1,37 +0,0 @@
----
-layout: page
-title: "Arduino switch support"
-description: "Instructions how to integrate Arduino boards within Home Assistant."
-date: 2015-09-14 18:28
-sidebar: false
-comments: false
-sharing: true
-footer: true
----
-
-<img src='/images/supported_brands/arduino.png' class='brand pull-right' />
-The arduino switch platform allows you to control the digital pins of your [Arduino](https://www.arduino.cc/) board. Support for switching pins is limited to high/on and low/off of the digital pins. PWM (pin 3,5,6,9,10, and 11 on an Arduino Uno) is not supported yet.
-
-To enable the Arduino pins with Home Assistant, add the following section to your `configuration.yaml` file:
-
-```yaml
-# Example configuration.yaml entry
-switch:
-  platform: arduino
-  pins:
-    11:
-      name: Fan Office
-      type: digital
-    12:
-      name: Light Desk
-      type: digital
-```
-
-Configuration variables:
-
-- **pins** (*Required*): Array of pins to use. The number corresponds with the pin numbering schema of your board.
-  - **name**: Name that will be used in the frontend for the pin.
-  - **type**: The type of the pin. At the moment only 'digital' is supported.
-
-The digital pins are numbered from 0 to 13. The available pins are 2 till 13. For testing purposes you can use pin 13 because with that pin you can control the internal LED.
-