jeena/home-assistant.github.io
1
0
Fork 0
Code Issues Pull requests Projects Packages Wiki Activity Actions

Misc fixes: e.g. -> e.g., and proper case for Home Assistant (#4942)

Browse source 
* e.g. to e.g., and proper case for Home Assistant

* Instructions how to -> Instructions on how to
This commit is contained in:
Alok Saboo 2018-03-17 15:20:37 -04:00 • committed by Franck Nijhof
parent 3fd5cd5f94
commit 1aca7b08cf
764 changed files with 883 additions and 885 deletions
Download patch file Download diff file Expand all files Collapse all files

2
source/_components/sensor.mold_indicator.markdown
View file

@ -15,7 +15,7 @@ ha_iot_class: "Local Polling"
The Mold Indicator sensor component consumes information of two temperature sensors and a humidity sensor to give an indication for possible mold growth in your home. In case of bad ventilation and insulation, the indoor humidity may lead to condensation on cold surfaces as the windows or even walls. Condensation or a high relative humidity near those cold surfaces leads to a higher risk for mold growth. This sensor component estimates the temperature at a pre-calibrated critical point in the room (the coldest surface) and calculates the relative humidity of the air at that point. If the sensor value rises above approximately 70 percent, mold growth might occur and the room should be ventilated. At 100%, the air humidity condensates at the critical point.
The sensor data may be used e.g. to signal bad air quality (too high air humidity) or to automate operation of indoor air humidifiers to keep the indoor humidity at an optimum. To use the Mold Indicator sensor in your installation, add the following to your `configuration.yaml` file:
The sensor data may be used e.g., to signal bad air quality (too high air humidity) or to automate operation of indoor air humidifiers to keep the indoor humidity at an optimum. To use the Mold Indicator sensor in your installation, add the following to your `configuration.yaml` file:
```yaml
# Example configuration.yaml entry