0.22 (#570)

* Initial snmp sensor docs (#538)

* Fixed markdown and added logo (#551)

* Added documentation for router operating mode for asuswrt (#545)

* local_file camera component documenatation (#554)

* Documenation for local_file camera component

* Update camera.local_file.markdown

* Added information about voltage sensor

* Instructions for Pandora media player (#552)

* Add release

* Add pub_key

* Add BT Home Hub docs

* Markdown tweaks (#553)

* Add docs about MySensors IR switch (#556)

* Update sensor.mysensors docs, about moving V_IR_SEND type to switch
  platform.
* Update switch.mysensors docs. Add section about the new service and
  additional example sketch for the IR switch device.

* Update index.html

* plex sensor (#526)

* Add var descriptions

* Adds documentation for the Local File Camera (#482)

* Revert "Adds documentation for the Local File Camera" (#563)

* Minor changes

* Add Wink Rollershutter (#559)

* Added example of using template in shell_command. (#547)

* Add Documentation for Netatmo Welcome (#542)

* Reorganize  documentation for Netatmo

As Netatmo is now a Hub component, documentations has been splitted in several
parts betweent the hub, the sensors and the camera

Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>

* Add configuration variables for Netatmo Welcome cameras

* Add ha_release information on new documentation pages

* Netatmo Weather Station is a weather sensor

* Add blog post 0.22

source/_components/sensor.rfxtrx.markdown

@@ -7,18 +7,19 @@ sidebar: true
 comments: false
 sharing: true
 footer: true
+logo: rfxtrx.png
 ha_category: Sensor
 ---
 
 The `rfxtrx` platform support sensors that communicate in the frequency range of 433.92 MHz.
 
-First you have to set up your [rfxtrx hub.](/components/rfxtrx/)
+First you have to set up your [rfxtrx hub](/components/rfxtrx/).
 The easiest way to find your sensors is to add this to your `configuration.yaml`:
 
 ```yaml
-sensor: 
- platform: rfxtrx
- automatic_add: True
+sensor:
+  platform: rfxtrx
+  automatic_add: True
 ```
 
 Then when the sensor emits a signal it will be automatically added:
@@ -27,47 +28,45 @@ Then when the sensor emits a signal it will be automatically added:
 <img src='/images/components/rfxtrx/sensor.png' />
 </p>
 
-Here the name is 0a52080000301004d240259 and you can verify that it works from the frontend. 
+Here the name is `0a52080000301004d240259` and you can verify that it works from the frontend.
 Then you should update your configuration to:
 
 ```yaml
 sensor:
- platform: rfxtrx
- devices:
-    0a52080000301004d240259: 
-        name: device_name
+  platform: rfxtrx
+  devices:
+    0a52080000301004d240259:
+      name: device_name
 ```
 
 If you want to display several data types from one sensor:
 
 ```yaml
-sensor: 
- platform: rfxtrx
- devices:
-    0a520802060100ff0e0269: 
-        name: Bath
-        data_type: 
-         - Humidity
-         - Temperature
+sensor:
+  platform: rfxtrx
+  devices:
+    0a520802060100ff0e0269:
+      name: Bath
+      data_type:
+       - Humidity
+       - Temperature
 ```
 
-
-
 Example configuration:
 
 ```yaml
 # Example configuration.yaml entry
-sensor: 
- platform: rfxtrx
- automatic_add: True
- devices:
-   0a52080705020095220269:
-     name: Lving
-   0a520802060100ff0e0269:
-        name: Bath
-        data_type: 
-         - Humidity
-         - Temperature
+sensor:
+  platform: rfxtrx
+  automatic_add: True
+  devices:
+    0a52080705020095220269:
+      name: Lving
+    0a520802060100ff0e0269:
+      name: Bath
+      data_type:
+       - Humidity
+       - Temperature
 ```
 
 Configuration variables:
@@ -75,4 +74,4 @@ Configuration variables:
 - **devices**  (*Optional*): A list of devices with their name to use in the frontend.
 - **automatic_add** (*Optional*): To enable the automatic addition of new lights.
 - **data_type**  (*Optional*): Which data type the sensor should show
-
+- **fire_event** *Optional*: Fires an event even if the state is the same as before. Can be used for automations.