jeena/home-assistant.github.io
1
0
Fork 0
Code Issues Pull requests Projects Packages Wiki Activity Actions

fixed typos, spelling mistakes (#3436)

Browse source
This commit is contained in:
Florian Klien 2017-09-25 22:26:17 +02:00 • committed by Fabian Affolter
parent 9d94f28131
commit 3f1972b97b
139 changed files with 209 additions and 209 deletions
Download patch file Download diff file Expand all files Collapse all files

2
source/_components/alarm_control_panel.egardia.markdown
View file

@ -41,7 +41,7 @@ Configuration variables:
Note that this basic configuration will only enable you to read the armed/armed away/disarmed status of your alarm and will **not** update the status if the alarm is triggered. This is because of how Egardia built their system. The alarm triggers normally go through their servers.
You can change this, however, using the following procedure. This is a more advanced configuration.
1. Log in into your alarm system's control panel. You will need to access http://[ip of your control panel]. You know this already since you need it in the basic configuration from above. Log in to the control panel with your Egardia/Woonveilig username and password.
1. Log in into your alarm system's control panel. You will need to access http://[IP of your control panel]. You know this already since you need it in the basic configuration from above. Log in to the control panel with your Egardia/Woonveilig username and password.
2. Once logged in, go to *System Settings*, *Report* and change the Server Address for your primary server to the IP or hostname of your Home Assistant machine. Also, update the port number 85 or to anything you like. The provided software that you will set up in the next steps runs on port 85 by default. **Make sure to change the settings of the primary server otherwise the messages will not come through. Note that this will limit (or fully stop) the number of alarm messages you will get through Egardia's / Woonveilig services.** Maybe, that is just what you want. Make sure to save your settings by selecting 'OK'.
3. On your Home Assistant machine run `$ sudo python3 egardiaserver.py`. Refer to the [python-egardia repository](https://github.com/jeroenterheerdt/python-egardia) for detailed documentation on parameters. This will receive status codes from your alarm control panel and display them. You will need the codes to include in your configuration.yaml. Make sure to change the status of your alarm to all states (disarm, arm, armhome) as well as trigger the alarm in all ways possible to get 100% coverage. **Before triggering the alarm it might be good to disable the siren temporarily (can be done in Panel Settings).**
4. Once you have the codes, update your `configuration.yaml`: