jeena/home-assistant.github.io
1
0
Fork 0
Code Issues Pull requests Projects Packages Wiki Activity Actions

fixed typos, spelling mistakes (#3436)

Browse source
This commit is contained in:
Florian Klien 2017-09-25 22:26:17 +02:00 • committed by Fabian Affolter
parent 9d94f28131
commit 3f1972b97b
139 changed files with 209 additions and 209 deletions
Download patch file Download diff file Expand all files Collapse all files

6
source/_components/mysensors.markdown
View file

@ -49,9 +49,9 @@ mysensors:
Configuration variables:
- **device** (*Required*): The path to the serial gateway where it is connected to your Home Assistant host, or the address of the tcp ethernet gateway, or `mqtt` to setup the MQTT gateway. Resolving DNS addresses is theoretically supported but not tested.
- **device** (*Required*): The path to the serial gateway where it is connected to your Home Assistant host, or the address of the TCP Ethernet gateway, or `mqtt` to setup the MQTT gateway. Resolving DNS addresses is theoretically supported but not tested.
- **baud_rate** (*Optional*): Specifies the baud rate of the connected serial gateway. Default is 115200.
- **tcp_port** (*Optional*): Specifies the port of the connected tcp ethernet gateway. Default is 5003.
- **tcp_port** (*Optional*): Specifies the port of the connected TCP Ethernet gateway. Default is 5003.
- **topic_in_prefix** (*Optional*): Set the prefix of the MQTT topic for messages coming from the MySensors gateway in to Home Assistant. Default is an empty string.
- **topic_out_prefix** (*Optional*): Set the prefix of the MQTT topic for messages going from Home Assistant out to the MySensors gateway. Default is an empty string.
- **debug** (*DEPRECATED*): This option has been deprecated. Please remove this from your config is you have it included. Use the logger component to filter log messages on log level.
@ -88,7 +88,7 @@ The MQTT gateway requires MySensors version 2.0 and only the MQTT client gateway
Present a MySensors sensor or actuator, by following these steps:
1. Connect the serial gateway to your computer or the ethernet or MQTT gateway to your network.
1. Connect the serial gateway to your computer or the Ethernet or MQTT gateway to your network.
2. Configure the MySensors component in `configuration.yaml`.
3. Start hass.
4. Write and upload your MySensors sketch to the sensor. Make sure you: