jeena/home-assistant.github.io
1
0
Fork 0
Code Issues Pull requests Projects Packages Wiki Activity Actions

✅ Fixes spelling of 'Home Assistant' everywhere (#3524)

Browse source
This commit is contained in:
Franck Nijhof 2017-10-05 10:53:08 +02:00 • committed by Fredrik Lindqvist
parent 664e1bf86e
commit 443904de16
22 changed files with 34 additions and 34 deletions
Download patch file Download diff file Expand all files Collapse all files

2
source/_components/envisalink.markdown
View file

@ -65,7 +65,7 @@ Configuration variables:
- **evl_version** (*Optional*): 3 for evl3, or 4 for evl4. Default: `3`
- **keepalive_interval** (*Optional*): This is a periodic heartbeat signal (measured in seconds) sent to your Envisalink board to keep it from restarting. This is required for DSC and Honeywell systems. Defaults to `60` seconds.
- **zonedump_interval** (*Optional*): This is an interval (measured in seconds) where the evl will dump out all zone statuses. This is required for Honeywell systems, which do not properly send zone closure events. DSC boards do not technically need this. Default: `30`
- **panic_type** (*Optional*): Both DSC and Honeywell boards support a "panic" alarm. This is used when the alarm_trigger service is called in home assistant. This determines which type of panic alarm to raise. Default = Police. Valid values are: Police, Fire, Ambulance
- **panic_type** (*Optional*): Both DSC and Honeywell boards support a "panic" alarm. This is used when the alarm_trigger service is called in Home Assistant. This determines which type of panic alarm to raise. Default = Police. Valid values are: Police, Fire, Ambulance
- **zones** (*Optional*): Envisalink boards have no way to tell us which zones are actually in use, so each zone must be configured in Home Assistant. For each zone, at least a name must be given. For more information on the available zone types, take a look at the [Binary Sensor](/components/binary_sensor.envisalink/) docs. *Note: If no zones are specified, Home Assistant will not load any binary_sensor components.*
- **partitions** (*Optional*): Again, Envisalink boards do not tell us what is in use and what is not, so each partition must be configured with a partition name. If no partition parameter is specified, then no alarm_panel or sensor components are loaded.