jeena/home-assistant.github.io
1
0
Fork 0
Code Issues Pull requests Projects Packages Wiki Activity Actions

Minimizing of the configuration sample (#1012)

Browse source
This commit is contained in:
Fabian Affolter 2016-09-30 20:49:47 +02:00 • committed by GitHub
parent 695f16c114
commit 53ab256231
5 changed files with 68 additions and 37 deletions
Download patch file Download diff file Expand all files Collapse all files

5
source/_components/cover.rpi_gpio.markdown
View file

@ -19,7 +19,7 @@ It uses two pins on the Raspberry Pi.
- The `state_pin` will detect if the cover is closed, and
- the `relay_pin` will trigger the cover to open or close.
Although you do not need Andrews Hilliday's software controller when you run Home Assistant, he has written clear instructions on how to hook your garage door & sensors up to your Raspberry Pi, which can be found [here](https://github.com/andrewshilliday/garage-door-controller#hardware-setup).
Although you do not need Andrews Hilliday's software controller when you run Home Assistant, he has written clear instructions on how to hook your garage door and sensors up to your Raspberry Pi, which can be found [here](https://github.com/andrewshilliday/garage-door-controller#hardware-setup).
To enable Raspberry Pi Covers in your installation, add the following to your `configuration.yaml` file:
@ -27,12 +27,9 @@ To enable Raspberry Pi Covers in your installation, add the following to your `c
# Example configuration.yaml entry
cover:
platform: rpi_gpio
state_pull_mode: DOWN
relay_time: 1
covers:
- relay_pin: 10
state_pin: 11
name: 'Left door'
- relay_pin: 12
state_pin: 13
name: 'Right door'