jeena/home-assistant.github.io
1
0
Fork 0
Code Issues Pull requests Projects Packages Wiki Activity Actions

Merge remote-tracking branch 'origin/current' into next

Browse source
This commit is contained in:
Paulus Schoutsen 2017-11-16 22:15:30 -08:00
commit 5ab2ca280b
47 changed files with 469 additions and 157 deletions
Download patch file Download diff file Expand all files Collapse all files

2
source/_docs/z-wave/adding.markdown
View file

@ -16,6 +16,7 @@ To add (include) a non-secure Z-Wave [device](/docs/z-wave/devices/) to your sys
1. Go to the [Z-Wave control panel](/docs/z-wave/control-panel/) in the Home Assistant frontend
2. Click the **Add Node** button in the *Z-Wave Network Management* card - this will place the controller in inclusion mode
3. Activate your device to be included by following the instructions provided with the device
4. With the device in its final location, run a *Heal*
Don't use this for [secure devices](https://home-assistant.io/docs/z-wave/adding/#adding-secure-devices), since this is likely to limit the features the device supports.
@ -56,3 +57,4 @@ To remove (exclude) a Z-Wave device from your system:
1. Go to the Z-Wave control panel in the Home Assistant frontend
2. Click the **Remove Node** button in the *Z-Wave Network Management* card - this will place the controller in exclusion mode
3. Activate your device to be excluded by following the instructions provided with the device
4. With the device in its final location, run a *Heal*

10
source/_docs/z-wave/device-specific.markdown
View file

@ -47,12 +47,20 @@ $ echo -e -n "\x01\x08\x00\xF2\x51\x01\x01\x05\x01\x50" > /dev/serial/by-id/usb-
### {% linkable_title Razberry Board %}
You need to disable the on-board Bluetooth since the board requires the use of the hardware UART (and there's only one on the Pi3). You do this by adding the following to the end of `/boot/config.txt`, then rebooting:
You need to disable the on-board Bluetooth since the board requires the use of the hardware UART (and there's only one on the Pi3). You do this by adding the following to the end of `/boot/config.txt`:
```
dtoverlay=pi3-disable-bt
```
Then disable the Bluetooth modem service:
```bash
$ sudo systemctl disable hciuart
```
Finally, reboot to make those changes active.
### {% linkable_title Aeon Minimote %}
Here's a handy configuration for the Aeon Labs Minimote that defines all possible button presses. Put it into `automation.yaml`.