jeena/home-assistant.github.io
1
0
Fork 0
Code Issues Pull requests Projects Packages Wiki Activity Actions

Various markdown, spelling, and grammar fixes #3 (#4510)

Browse source 
* ✅ Various markdown, spelling, and grammar fixes

* ✅ Various markdown, spelling, and grammar fixes

* ✅ Various markdown, spelling, and grammar fixes
This commit is contained in:
Franck Nijhof 2018-01-25 18:21:05 +01:00 • committed by Fabian Affolter
parent 42f9a8e5cd
commit 6224c71c08
98 changed files with 131 additions and 131 deletions
Download patch file Download diff file Expand all files Collapse all files

4
source/_docs/z-wave/control-panel.markdown
View file

@ -39,7 +39,7 @@ Here is where you [include and exclude](/docs/z-wave/adding/) Z-Wave devices fro
* **Rename Node** sets a node's name - this won't happen immediately, and requires you to restart Home Assistant (not reboot) to set the new name
* **Heal Node** starts healing of the node.(Update neighbour list and update return routes)
* **Heal Node** starts healing of the node.(Update neighbor list and update return routes)
* **Test Node** sends no_op test messages to the node. This could in theory bring back a dead node.
@ -114,7 +114,7 @@ Underneath that you can select any supported configuration parameter to see the
## {% linkable_title Node user codes %}
If your node has user codes, you can set and delete them. The format is raw hex Ascii code. Bellow the input you will see your actual code. For normal nodes this is as follows:
If your node has user codes, you can set and delete them. The format is raw hex Ascii code. Below the input you will see your actual code. For normal nodes this is as follows:
```yaml
\x30 = 0
\x31 = 1

2
source/_docs/z-wave/device-specific.markdown
View file

@ -29,7 +29,7 @@ Home Assistant stores logs from Z-Wave in `OZW_log.txt` in the Home Assistant co
### {% linkable_title Aeotec Z-Stick %}
It's totally normal for your Z-Wave stick to cycle through its LEDs (Yellow, Blue and Red) while plugged into your system. If you don't like this behaviour it can be turned off.
It's totally normal for your Z-Wave stick to cycle through its LEDs (Yellow, Blue and Red) while plugged into your system. If you don't like this behavior it can be turned off.
Use the following example commands from a terminal session on your Pi where your Z-Wave stick is connected.

4
source/_docs/z-wave/installation.markdown
View file

@ -25,7 +25,7 @@ $ sudo /Applications/Python\ x.x/Install\ Certificates.command
```
<p class='note'>
The installation of python-openzwave happens when you first enable the Z-Wave component, and can take half an hour or more on a Raspbery Pi.
The installation of python-openzwave happens when you first enable the Z-Wave component, and can take half an hour or more on a Raspberry Pi.
</p>
## {% linkable_title Configuration %}
@ -198,7 +198,7 @@ Ensure you keep a backup of this key. If you have to rebuild your system and don
## {% linkable_title First Run %}
The (compilation and) installation of python-openzwave happens when you first enable the Z-Wave component, and can take half an hour or more on a Raspbery Pi. When you upgrade Home Assistant and python-openzwave is also upgraded, this will also result in a delay while the new version is compiled and installed.
The (compilation and) installation of python-openzwave happens when you first enable the Z-Wave component, and can take half an hour or more on a Raspberry Pi. When you upgrade Home Assistant and python-openzwave is also upgraded, this will also result in a delay while the new version is compiled and installed.
The first run after adding a device is when the `zwave` component will take time to initialize the entities, some entities may appear with incomplete names. Running a network heal may speed up this process.