jeena/home-assistant.github.io
1
0
Fork 0
Code Issues Pull requests Projects Packages Wiki Activity Actions

Lots of typo corrections, added some useful examples. In automation / numeric state, I removed the config lines that used value_template for battery when the condition was for a temp sensor.

Browse source
This commit is contained in:
Lindsay Ward 2016-03-28 12:46:47 +10:00
parent f228f7000e
commit 69ca7107b7
13 changed files with 108 additions and 68 deletions
Download patch file Download diff file Expand all files Collapse all files

8
source/getting-started/troubleshooting.markdown
View file

@ -9,20 +9,20 @@ sharing: true
footer: true
---
It can happen that you run into trouble while installing Home Assistant. This page is here to help you figure out the most common problems.
It can happen that you run into trouble while installing Home Assistant. This page is here to help you solve the most common problems.
#### {% linkable_title pip3: command not found %}
This utility should have been installed as part of the Python 3.4 installation. Check if Python 3.4 is installed by running `python3 --version`. If it is not installed, [download it here](https://www.python.org/getit/).
If you are able to successfully run `python3 --version` but not `pip3`, run the following command instead to install Home Assistant:
If you are able to successfully run `python3 --version` but not `pip3`, install Home Assistant by running the following command instead:
```bash
$ python3 -m pip install homeassistant
```
#### {% linkable_title No module named pip %}
[Pip](https://pip.pypa.io/en/stable/) should come bundled with the latest Python 3 but is ommitted by some distributions. If you are unable to run `python3 -m pip --version` you can install `pip` by [downloading the installer](https://bootstrap.pypa.io/get-pip.py) and run it with Python 3:
[Pip](https://pip.pypa.io/en/stable/) should come bundled with the latest Python 3 but is omitted by some distributions. If you are unable to run `python3 -m pip --version` you can install `pip` by [downloading the installer](https://bootstrap.pypa.io/get-pip.py) and running it with Python 3:
```bash
$ python3 get-pip.py
@ -63,7 +63,7 @@ $ iptables-save > /etc/network/iptables.rules # your rules may be saved elsewhe
```
#### {% linkable_title Run the development version %}
If you want to stay on top of the development of Home Assistant then you can upgrade to the `dev` branch. This can result in an unstable system, loss of data, etc, etc.
If you want to stay on top of the development of Home Assistant then you can upgrade to the `dev` branch. This can result in an unstable system, loss of data, etc. etc.
```bash
$ pip3 install --upgrade git+git://github.com/balloob/home-assistant.git@dev