jeena/home-assistant.github.io
1
0
Fork 0
Code Issues Pull requests Projects Packages Wiki Activity Actions

Add stubs and links

Browse source
This commit is contained in:
Fabian Affolter 2016-07-01 10:28:42 +02:00
parent 049242d362
commit 9c28c225b6
No known key found for this signature in database
GPG key ID: DDF3D6F44AAB1336
4 changed files with 62 additions and 5 deletions
Download patch file Download diff file Expand all files Collapse all files

10
source/_components/envisalink.markdown
View file

@ -13,15 +13,15 @@ ha_release: 0.23
---
This component will allow Home Assistant users who own either a DSC or Honeywell alarm panel to leverage their alarm system and it's sensors to provide Home Assistant with rich information about their homes.
Connectivity between Home Assistant and the alarm panel is accomplished through a device produced by Eyez On, known as the Envisalink. The Envisalink evl3 and evl4 boards provide a TCP/IP interface to the alarm panel, where it emulates an alarm keypad. This board also exposes a raw TCP/IP based API, upon which this component is built. Currently, the Envisalink version 4 is the latest model. This component supports both the evl3 and the evl4.
Connectivity between Home Assistant and the alarm panel is accomplished through a device produced by Eyez On, known as the Envisalink. The Envisalink evl3 and evl4 boards provide a TCP/IP interface to the alarm panel, where it emulates an alarm keypad. This board also exposes a raw TCP/IP based API, upon which this component is built. Currently, the Envisalink version 4 is the latest model. This component supports both the evl3 and the evl4.
Please visit the [eyezon website](http://www.eyezon.com/) for further information about the evl3 and evl4 boards.
There is currently support for the following device types within Home Assistant:
- Binary Sensor (Reports on zone status)
- Sensor (Emulates an alpha-numeric keypad attached to the alarm panel)
- Alarm Control Panel (Reports on partition status, and can be used to arm/disarm the system)
- [Binary Sensor](/components/binary_sensor.envisalink/): Reports on zone status
- [Sensor](/components/sensor.envisalink/): Emulates an alpha-numeric keypad attached to the alarm panel
- [Alarm Control Panel](/components/alarm_control_panel.envisalink/): Reports on partition status, and can be used to arm/disarm the system
This is a fully event-based component- any event sent by the Envisalink device will be immediately reflected within Home Assistant.
@ -30,7 +30,7 @@ This is a fully event-based component- any event sent by the Envisalink device w
An `envisalink` section must be present in the `configuration.yaml` file and contain the following options as required:
### Required Parameters
- **host**: The ip address of the Envisalink device on your home network.
- **host**: The IP address of the Envisalink device on your home network.
- **panel_type**: `HONEYWELL` or `DSC`, depending upon which alarm system you have.
- **user_name**: Which username to authenticate with when connecting to the device. On a Honeywell alarm panel, the username/password are the same.
- **password**: Which password to authenticate with when connecting to the device.