jeena/home-assistant.github.io
1
0
Fork 0
Code Issues Pull requests Projects Packages Wiki Activity Actions

Binary sensor classes (#1396)

Browse source 
* Link to binary sensor docs for sensor_class

* Include link to sensor_class (fixes #1346)
This commit is contained in:
Fabian Affolter 2016-11-05 08:58:39 +01:00 • committed by GitHub
parent 328537442c
commit d85fe543da
3 changed files with 10 additions and 25 deletions
Download patch file Download diff file Expand all files Collapse all files

2
source/_components/envisalink.markdown
View file

@ -66,6 +66,6 @@ Configuration variables:
- **keepalive_interval** (*Optional*): This is a periodic heartbeat signal (measured in seconds) sent to your Envisalink board to keep it from restarting. This is required for DSC and Honeywell systems. Defaults to `60` seconds.
- **zonedump_interval** (*Optional*): This is an interval (measured in seconds) where the evl will dump out all zone statuses. This is required for Honeywell systems, which do not properly send zone closure events. DSC boards do not technically need this. Default: `30`
- **panic_type** (*Optional*): Both DSC and Honeywell boards support a "panic" alarm. This is used when the alarm_trigger service is called in home assistant. This determines which type of panic alarm to raise. Default = Police. Valid values are: Police, Fire, Ambulance
- **zones** (*Optional*): Envisalink boards have no way to tell us which zones are actually in use, so each zone must be configured in Home Assistant. For each zone, at least a name must be given. *Note: if no zones are specified, Home Assistant will not load any binary_sensor components.*
- **zones** (*Optional*): Envisalink boards have no way to tell us which zones are actually in use, so each zone must be configured in Home Assistant. For each zone, at least a name must be given. For more information on the available zone types, take a look at the [Binary Sensor](/components/binary_sensor.envisalink/) docs. *Note: If no zones are specified, Home Assistant will not load any binary_sensor components.*
- **partitions** (*Optional*): Again, Envisalink boards do not tell us what is in use and what is not, so each partition must be configured with a partition name. If no partition parameter is specified, then no alarm_panel or sensor components are loaded.