Abode Cloud Push and new components (#3224)

* Changed abode sensors to Cloud Push. Added additional binary sensors. Added lock, cover, and switches. Added abode logo to all pages.

* Fixed typo's.

source/_components/abode.markdown

@@ -10,7 +10,7 @@ footer: true
 logo: abode.jpg
 ha_category: Hub
 ha_release: 0.52
-ha_iot_class: "Cloud Polling"
+ha_iot_class: "Cloud Push"
 ---
 
 The `abode` component will allow users to integrate their Abode Home Security systems into Home Assistant and use its alarm system and sensors to automate their homes.  
@@ -19,10 +19,11 @@ Please visit the [Abode website](https://goabode.com/) for further information a
 
 There is currently support for the following device types within Home Assistant:
 
-- [Binary Sensor](/components/binary_sensor.abode/): Reports on `Door Contacts` (open or close) and `Motion Camera` (motion detected or not)
 - [Alarm Control Panel](/components/alarm_control_panel.abode/): Reports on current alarm status and can be used to arm/disarm the system
-
-The component currently polls every 30 seconds, so device status may not be immediately reflected in Home Assistant.
+- [Binary Sensor](/components/binary_sensor.abode/): Reports on `Door Contacts` (open or closed), `Motion Camera` (motion detected or not), `Water Sensors` (detected or not), `Keypad` (online or not), `Glass Break` (online or not), `Status Display` (online or not)
+- [Cover](/components/cover.abode/): Reports on `Secure Barriers` (open or closed) and can be used to open/close the cover
+- [Lock](/components/cover.abode/): Reports on `Door Locks` (locked or unlocked) and can be used to lock/unlock the door
+- [Switch](/components/switch.abode/): Reports on `Power Switch Sensors` (on or off) and can be used to turn the power switch sensor on/off
 
 An `abode` section must be present in the `configuration.yaml` file and contain the following options as required: