Add link to a video of a talk at foss-north 2018

I gave a talk at foss-north, which is a free / open source conference
covering both software and hardware from the technical perspective.
They recorded it and put it on YouTube.

This patch adds a link to that talk on the help page under "Videos,
talks, workshops and alike".

_config.yml

@@ -139,14 +139,14 @@ social:
 
 # Home Assistant release details
 current_major_version: 0
-current_minor_version: 67
-current_patch_version: 1
-date_released: 2018-04-17
+current_minor_version: 69
+current_patch_version: 0
+date_released: 2018-05-11
 
 # Either # or the anchor link to latest release notes in the blog post.
 # Must be prefixed with a # and have double quotes around it.
 # Major release:
-patch_version_notes: "#release-0671---april-17"
+patch_version_notes: "#"
 # Minor release (Example #release-0431---april-25):
 
 # Date we moved to Discourse for comments

source/_addons/lets_encrypt.markdown

@@ -2,7 +2,7 @@
 layout: page
 title: "Let's Encrypt"
 description: "Automatically manage your SSL certificate using Let's Encrypt."
-date: 2017-04-30 13:28
+date: 2018-04-18 10:55
 sidebar: true
 comments: false
 sharing: true
@@ -41,4 +41,24 @@ http:
 
 If you use another port such as `8123` or an SSL proxy, change the port number.
 
+## {% linkable_title Enabling auto-renewals %}
+
+Out of the box, the add-on will not automatically renew your certificate. In fact, it only starts, tries to get/renew your certificte, and then stops. It's up to you to manually start it again whenever your certificate comes close to expiry.
+
+However, you can automate this process using Home Assistant.
+
+Use this in your `automations.yaml` to attempt certificate renewal each day at midnight:
+
+```yaml
+- id: letsencrypt-renewal
+  alias: "Let's Encrypt Renewal"
+  trigger:
+  - platform: time
+    at: '00:00:00'
+  action:
+  - service: hassio.addon_restart
+    data:
+      addon: core_letsencrypt
+```
+
 [DuckDNS add-on]: /addons/duckdns/

source/_addons/snips.markdown

@@ -2,14 +2,14 @@
 layout: page
 title: "Snips.ai"
 description: "Enhance your Hass.io installation with a local voice assistant."
-date: 2018-03-22 13:28
+date: 2018-05-02 13:28
 sidebar: true
 comments: false
 sharing: true
 footer: true
 ---
 
-[Snips.ai] is an AI-powered voice assistant that runs on the Raspberry Pi 3 and x86 platforms. It runs on-device and is Private by Design.
+[Snips.ai](https://snips.ai/) is an AI-powered voice assistant that runs on the Raspberry Pi 3 and x86 platforms. It runs on-device and is Private by Design.
 
 The Snips add-on depends on the Mosquitto add on to bridge to Home Assistant, so make sure that is installed.
 
@@ -17,7 +17,7 @@ HomeAssistant comes with certain Intents builtin to handle common tasks. A compl
 
 The Snips addon by default comes with an assistant that allows you to turn on lights or switches, open covers, or add and list items to a shopping list if that component is enabled.
 
-If using a USB microphone and speakers plugged into the raspberry pi output, Snips will work without any change to the configuration. Trying saying things like:
+If using a USB microphone and speakers plugged into the Raspberry Pi output, Snips will work without any change to the configuration. Trying saying things like:
 
 ```
 Turn on kitchen light
@@ -25,42 +25,16 @@ Open garage door
 What is on my shopping list
 ```
 
-To get started creating your own configuration, follow [their tutorial](https://github.com/snipsco/snips-platform-documentation/wiki/2.-Create-an-assistant-using-an-existing-bundle) to create an assistant and download the training data. You can add the HomeAssistant bundle to your assistant to enable the built-in intents, and add or create your own intents to do more complex tasks.
+To get started creating your own configuration, follow [their tutorial](https://snips.gitbook.io/documentation/console) to create an assistant and download the training data. You can also add the HomeAssistant Skill to your assistant to enable the built-in intents, and add or create your own intents to do more complex tasks.
 
-Now install and activate the [Samba] add-on so you can upload your training data. Connect to the "share" Samba share and copy your training data over. Name the file `assistant.zip`.
+Now install and activate the [Samba](/addons/samba/) add-on so you can upload your training data. Connect to the "share" Samba share and copy your assistant over. Name the file `assistant.zip` or whatever you have configured in the configuration options.
 
-Now it's time to start Snips for the first time. When the Snips add-on starts, it will output your audio devices. If you are using a USB mic and the raspberry pi output, you won't need to change anything:
+Now it's time to start Snips for the first time. You can configure the microphone and sound card using the Add-on interface. Now start the add-on.
 
-```text
-**** List of PLAYBACK Hardware Devices ****
-card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
-  Subdevices: 8/8
-  Subdevice #0: subdevice #0
-  Subdevice #1: subdevice #1
-  Subdevice #2: subdevice #2
-  Subdevice #3: subdevice #3
-  Subdevice #4: subdevice #4
-  Subdevice #5: subdevice #5
-  Subdevice #6: subdevice #6
-  Subdevice #7: subdevice #7
-card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
-  Subdevices: 1/1
-  Subdevice #0: subdevice #0
-```
-
-You need to use this information to point the add-on at the right speakers and microphone. The information describes different cards and devices. On a Raspberry Pi 3, card 0 - device 0 is the built-in headset port, card 0 - device 1 is the HDMI port. In the example above, the USB microphone showed up as card 1 - device 0.
-
-Find the microphone and speakers that you want to use and note down their device and card number. We will need that to configure the add-on options `mic` (microphone to use) and `speaker` (speaker to use). The format for these options is `<card #>,<device #>`. Change the configuration options and click save.
-
-Now start the add-on.
-
-### Add-On configuration
+### {% linkable_title Add-On configuration %}
 
 ```json
 {
-  "mic": "1,0",
-  "speaker": "1,0",
-  "assistant": "assistant.zip",
   "mqtt_bridge": {
     "active": true,
     "host": "172.17.0.1",
@@ -68,23 +42,76 @@ Now start the add-on.
     "user": "",
     "password": ""
   },
+  "assistant": "assistant.zip",
+  "language": "en",
+  "custom_tts": false,
+  "tts_platform": "amazon_polly"
 }
 ```
 
 Configuration variables:
 
-- **mqtt_bridge** : Snips uses MQTT to communicate and defaults to their own broker. Use this config option to bridge their broker to your the Mosquitto add-on.
-- **mic**: This is the hardware address of your microphone. Look at the Snips output if you are using different hardware.
+- **mqtt_bridge**: Snips uses MQTT to communicate and defaults to their own broker. Use this config option to bridge their broker to your the Mosquitto add-on.
+- **assistant**: The name of your custom assistant in `/share`. If no assistant is found then a default assistant will be used.
+- **language**: Language. This is used to select the default custom assistant, Currently `en`, `de` and `fr` are supported.
+- **custom_tts**: Whether to use a TTS provider from Home Assistant for a variety of voices.
+- **tts_platform**: Which TTS platform to use.
 
 ### {% linkable_title Home Assistant configuration %}
 
-Use the Home Assistant [Snips.ai component][comp] to integrate the add-on into Home Assistant.
+A simple configuration just requires this. Consult [Snips.ai component](/components/snips/) for more options.
 
 ```yaml
 snips:
 ```
 
-[Snips.ai]: https://snips.ai/
+### {% linkable_title Home Assistant configuration %}
+
+There is an active [discord](https://discordapp.com/invite/3939Kqx) channel for further support.
+
+### {% linkable_title Examples %}
+
+So now you can turn lights on and off, let's check the weather. Log on to the [console](https://console.snips.ai/). If this is your first time, create a new assistant and add the Home Assistant skill, along with the Weather skill by snips. Download your assistant manually and copy it to the `/share` folder on your HassIO installation using the Samba addon.
+
+Next create a weather sensor, e.g., one for (Dark Sky)[/components/sensor.darksky/] and put the `api_key` in your `secrets.yaml` file.
+
+```yaml
+- platform: darksky
+  name: "Dark Sky Weather"
+  api_key: !secret dark_sky_key
+  update_interval:
+    minutes: 10
+  monitored_conditions:
+    - summary
+    - hourly_summary
+    - temperature
+    - temperature_max
+    - temperature_min
+```
+Next add this to your `configuration.yaml` file to reference a new `intent_script` component. This is a good practice to [split your configuration files](/docs/configuration/splitting_configuration/) up.
+
+```yaml
+intent_script: !include intent_script.yaml
+```
+
+Finally, create this `intent_script.yaml` file in your configuration directory.
+
+{% raw %}
+```yaml
+searchWeatherForecast:
+  speech:
+    type: plain
+    text: >
+      The weather is currently
+      {{ states('sensor.dark_sky_weather_temperature') | round(0) }}
+      degrees outside and {{ states('sensor.dark_sky_weather_summary') }}.
+      The high today will be
+      {{ states('sensor.dark_sky_weather_daily_high_temperature') | round(0)}}
+      and {{ states('sensor.dark_sky_weather_hourly_summary') }}
+```
+{% endraw %}
+
+Now just restart HassIO and ask it what the weather is like.
+
 [their tutorial]: https://github.com/snipsco/snips-platform-documentation/wiki/2.-Create-an-assistant-using-an-existing-bundle
-[Samba]: /addons/samba/
-[comp]: /components/snips/
+

source/_components/alarm_control_panel.alarmdecoder.markdown

@@ -27,7 +27,9 @@ The Alarm Decoder component gives you access to several services for you to cont
 - `alarm_disarm`: Disarms the alarm from any state. Also clears a `check_zone` flag after an alarm was triggered.
 - `alarmdecoder_alarm_toggle_chime`: Toggles the alarm's chime state.
 
-**Note**: `alarm_arm_custom_bypass` and `alarm_trigger`, while available in the services list in Home Assistant, are not currently implemented in the Alarm Decoder component.
+<p class='note'>
+`alarm_arm_custom_bypass` and `alarm_trigger`, while available in the services list in Home Assistant, are not currently implemented in the Alarm Decoder platform. 
+</p>
 
 ### {% linkable_title Attributes %}
 

source/_components/binary_sensor.hive.markdown

@@ -14,11 +14,12 @@ ha_iot_class: "Cloud Polling"
 ---
 
 
-The 'hive' binary sensor component integrates your Hive sensors into Home Assistant.
+The `hive` binary sensor component integrates your Hive sensors into Home Assistant.
 
-The Hive binary sensor component supports the following Hive products:
-- **Hive Window or Door Sensor**
-- **Hive Motion Sensor**
+The platform supports the following Hive products:
+
+- Hive Window or Door Sensor
+- Hive Motion Sensor
 
 
 <p class='note'>

source/_components/binary_sensor.modbus.markdown

@@ -15,10 +15,12 @@ ha_iot_class: "Local Push"
 
 The `modbus` binary sensor allows you to gather data from [Modbus](http://www.modbus.org/) coils.
 
+## {% linkable_title Configuration %}
+
 To use your Modbus binary sensors in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 binary_sensor:
   - platform: modbus
     coils:
@@ -39,7 +41,7 @@ Configuration variables:
   
 It's possible to change the default 30 seconds scan interval for the sensor updates as shown in the [Platform options](/docs/configuration/platform_options/#scan-interval) documentation.
 
-### {% linkable_title Full example %}
+## {% linkable_title Full example %}
 
 Example a sensor with a 10 seconds scan interval:
 

source/_components/binary_sensor.mqtt.markdown

@@ -133,7 +133,7 @@ The configuration will look like the example below:
 
 {% raw %}
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 binary_sensor:
   - platform: mqtt
     name: Bathroom

source/_components/binary_sensor.pilight.markdown

@@ -15,10 +15,12 @@ ha_iot_class: "Local Polling"
 
 The `pilight` binary sensor platform implement the [pilight hub](/components/pilight/) binary sensor functionality. Two type of Pilight binary sensor configuration available. A normal sensor which send the on and off state cyclical and a trigger sensor which send only a trigger when an event happened (for example lots of cheap PIR motion detector).
 
+
+
 To enable a Pilight binary sensor in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 binary_sensor:
   - platform: pilight
     variable: 'state'

source/_components/binary_sensor.qwikswitch.markdown

@@ -0,0 +1,18 @@
+---
+layout: page
+title: "QwikSwitch Binary Sensor"
+description: "Instructions on how to integrate Qwikswitch dimmers and relays as sensors into Home Assistant."
+date: 2016-05-04 00:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: qwikswitch.png
+ha_category: Sensor
+ha_iot_class: "Local Push"
+ha_release: "0.68"
+---
+
+The `qwikswitch` binary_sensor platform allows you to use your [QwikSwitch](http://www.qwikswitch.co.za/) sensors within Home Assistant.
+
+The platform is configured through the [QwikSwitch component](/components/qwikswitch/).

source/_components/binary_sensor.random.markdown

@@ -16,6 +16,8 @@ ha_release: 0.57
 
 The `random` binary sensor platform is creating random states (`True`, 1, `on` or `False`, 0, `off`). This can be useful if you want to test automation rules. It generates a new state every time it is polled.
 
+## {% linkable_title Configuration %}
+
 To enable the random binary sensor, add the following lines to your `configuration.yaml`:
 
 ```yaml

source/_components/binary_sensor.workday.markdown

@@ -26,7 +26,7 @@ To enable the `workday` sensor in your installation, add the following to your `
 binary_sensor:
   - platform: workday
     country: DE
-    workdays: [ mon, wed, fri ]
+    workdays: [mon, wed, fri]
 ```
 
 Configuration variables:

source/_components/calendar.google.markdown

@@ -16,7 +16,7 @@ ha_release: 0.33
 
 The `google` calendar platform allows you to connect to your [Google Calendars](https://calendar.google.com) and generate binary sensors. The sensors created can trigger based on any event on the calendar or only for matching events. When you first setup this component it will generate a new configuration file `google_calendars.yaml` that will contain information about all of the calendars you can see.
 
-### {% linkable_title Prerequisites %}
+## {% linkable_title Prerequisites %}
 
 Generate a Client ID and Client Secret on [Google Developers Console](https://console.developers.google.com/start/api?id=calendar).
 
@@ -30,7 +30,7 @@ Generate a Client ID and Client Secret on [Google Developers Console](https://co
 1. Save the client ID and secret as you will need to put these in your `configuration.yaml` file.
 1. Click on "Library", search for "Google Calendar API" and enable it.
 
-### {% linkable_title Basic Setup %}
+## {% linkable_title Configuration %}
 
 To integrate Google Calendar in Home Assistant, add the following section to your `configuration.yaml` file:
 
@@ -61,7 +61,7 @@ The next steps will require you to have Home Assistant running.
 
 After you have it running complete the Google authentication that pops up. It will give you a URL and a code to enter. This will grant your Home Assistant service access to all the Google Calendars that the account you authenticate with can read. This is a Read-Only view of these calendars.
 
-### {% linkable_title Calendar Configuration %}
+## {% linkable_title Calendar Configuration %}
 
 Editing the `google_calendars.yaml` file.
 

source/_components/camera.local_file.markdown

@@ -1,7 +1,7 @@
 ---
 layout: page
 title: "Local File"
-description: "Instructions on how to use Local File as a Camera within Home Assistant."
+description: "Instructions how to use Local File as a Camera within Home Assistant."
 date: 2016-06-12 17:00
 sidebar: true
 comments: false
@@ -13,9 +13,9 @@ ha_iot_class: "Local Polling"
 ha_release: 0.22
 ---
 
-The `local_file` camera platform allows you to integrate any readable image file from disk into Home Assistant as a camera. If the image is updated on the file system the image displayed in Home Assistant will also be updated.
+The `local_file` camera platform allows you to integrate an image file from disk into Home Assistant as a camera. If the image is updated on the file system the image displayed in Home Assistant will also be updated. The service `local_file_update_file_path` can be used to update the image using an automation.
 
-This can for example be used with various camera platforms that save a temporary images locally. It can also be used to display a graph that you render periodically and will then be displayed in Home Assistant.
+The `local_file` camera can for example be used with various camera platforms that save a temporary images locally. It can also be used to display a graph that you render periodically and will then be displayed in Home Assistant.
 
 To enable this camera in your installation, add the following to your `configuration.yaml` file:
 
@@ -31,7 +31,11 @@ Configuration variables:
  - **file_path** (*Required*): File to serve as the camera.
  - **name** (*Optional*): Name of the camera
 
-<p class='note'>
-The given `file_path` must be an existing file because the camera platform setup make a readable check on it.
-</p>
+### {% linkable_title Service `camera.local_file_update_file_path` %}
 
+Use this service to change the file displayed by the camera.
+
+| Service data attribute | Description |
+| -----------------------| ----------- |
+| `entity_id` | String of the `entity_id` of the camera to update. |
+| `file_path` | The full path to the new image file to be displayed. |

source/_components/climate.hive.markdown

@@ -14,13 +14,15 @@ ha_iot_class: "Cloud Polling"
 ---
 
 
-The 'hive' climate component integrates your Hive thermostat and hot water into Home Assistant, enabling control of setting the **mode** and setting the **target temperature**.
+The `hive` climate platform integrates your Hive thermostat and hot water into Home Assistant, enabling control of setting the **mode** and setting the **target temperature**.
+
 A short boost for Hive Heating or Hive Hot water can be set by using the **Aux Heat** function, this will turn on the boost feature for Hive Heating or Hive Hot water for 30 minutes at 0.5 degrees higher than the current temperature.
 
-The Hive climate component supports the following Hive products:
-- **Hive Active Heating**
-- **Hive Multizone**
-- **Hot water control**
+The platform supports the following Hive products:
+
+- Hive Active Heating
+- Hive Multizone
+- Hot water control
 
 
 <p class='note'>

source/_components/climate.modbus.markdown

@@ -14,20 +14,20 @@ ha_iot_class: "Local Polling"
 ---
 
 
-The `modbus` thermostat allows you to use a sensor value (current temperature)
-and target value (target temperature) from [Modbus](http://www.modbus.org/)
-registers.
+The `modbus` thermostat allows you to use a sensor value (current temperature) and target value (target temperature) from [Modbus](http://www.modbus.org/) registers.
+
+## {% linkable_title Configuration %}
 
 To use your Modbus thermostat in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
+# Example configuration.yaml entry
 climate:
   - platform: modbus
     name: Watlow F4T
     slave: 1
     target_temp_register: 2782
     current_temp_register: 27586
-
 ```
 
 {% configuration %}
@@ -49,17 +49,18 @@ current_temp_register:
   type: int
 data_type:
   description: Response representation (int, uint, float, custom). If float selected, value will converted to IEEE 754 floating point format.
-    Default float.
   required: false
   type: string
+  default: float
 count:
   description: Number of registers to read.
   required: false
   type: int
 precision:
-  description: Number of valid decimals, default 0.
+  description: Number of valid decimals.
   required: false
   type: int
+  default: 0
 {% endconfiguration %}
 
 

source/_components/conversation.markdown

@@ -87,3 +87,9 @@ intent_script:
           - "{% if color == 'blue' %}255{% else %}0{% endif %}"
 {% endraw %}
 ```
+
+#### {% linkable_title Service `conversation.process` %}
+
+| Service data attribute | Optional | Description                                      |
+|------------------------|----------|--------------------------------------------------|
+| `text`                 |      yes | Transcribed text                                 |

source/_components/cover.gogogate2.markdown

@@ -20,7 +20,7 @@ The `gogogate2` cover platform lets you control Gogogate2-Enabled garage doors t
 To use your Gogogate2 cover in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 cover:
   - platform: gogogate2
     username: email@email.com

source/_components/cover.mqtt.markdown

@@ -15,6 +15,8 @@ ha_release: 0.18
 
 The `mqtt` cover platform allows you to control an MQTT cover (such as blinds, a rollershutter, or a garage door).
 
+## {% linkable_title Configuration %}
+
 The device state (`open` or `closed`) will be updated only after a new message is published on `state_topic` matching `state_open` or `state_closed`. If these messages are published with the `retain` flag set, the cover will receive an instant state update after subscription and Home Assistant will display the correct state on startup. Otherwise, the initial state displayed in Home Assistant will be `unknown`.
 
 There is an attribute that stores the relative position of the device, where 0 means the device is `closed` and all other intermediate positions means the device is `open`.
@@ -164,7 +166,7 @@ In this section you will find some real life examples of how to use this platfor
 The example below shows a full configuration for a cover without tilt.
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 cover:
   - platform: mqtt
     name: "MQTT Cover"
@@ -188,8 +190,9 @@ cover:
 
 The example below shows a full configuration for a cover.
 
+{% raw %}
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 cover:
   - platform: mqtt
     name: "MQTT Cover"
@@ -206,7 +209,7 @@ cover:
     payload_available: "online"
     payload_not_available: "offline"
     optimistic: false
-    value_template: '{% raw %}{{ value.x }}{% endraw %}'
+    value_template: '{{ value.x }}'
     tilt_command_topic: 'home-assistant/cover/tilt'
     tilt_status_topic: 'home-assistant/cover/tilt-state'
     tilt_min: 0
@@ -214,6 +217,7 @@ cover:
     tilt_closed_value: 70
     tilt_opened_value: 180
 ```
+{% endraw %}
 
 To test, you can use the command line tool `mosquitto_pub` shipped with `mosquitto` or the `mosquitto-clients` package to send MQTT messages. This allows you to operate your cover manually:
 

source/_components/cover.myq.markdown

@@ -15,10 +15,12 @@ ha_iot_class: Cloud Polling
 
 The `myq` cover platform lets you control MyQ-Enabled garage doors through Home Assistant. Device names in Home Assistant are generated based on the names defined in your MyQ Device mobile app.
 
+## {% linkable_title Configuration %}
+
 To use your MyQ cover in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 cover:
   - platform: myq
     username: YOUR_USERNAME

source/_components/deconz.markdown

@@ -34,7 +34,7 @@ ha_iot_class: "Local Push"
 
 Home Assistant will automatically discover deCONZ presence on your network, if `discovery:` is present in your `configuration.yaml` file.
 
-If you don't have the API key, you can generate an API key for deCONZ by using the one-click functionality similar to Philips Hue. Go to **Menu** -> **Settings** -> **Unlock Gateway** in deCONZ and then use the deCONZ configurator in Home Assistant frontend to create an API key. When you've generated the API key from Home Assistant, the API key will be stored in `deconz.conf` inside the `.homeassistant` folder.
+If you don't have the API key, you can generate an API key for deCONZ by using the one-click functionality similar to Philips Hue. Go to **Menu** -> **Settings** -> **Unlock Gateway** in deCONZ and then use the deCONZ configurator in Home Assistant frontend to create an API key. When you've generated the API key from Home Assistant, the API key will be stored in `.config_entries.json` inside the `.homeassistant` folder.
 
 You can add the following to your configuration.yaml file if you are not using the `discovery:` component:
 

source/_components/device_tracker.fritz.markdown

@@ -15,6 +15,8 @@ ha_release: "0.10"
 
 The `fritz` platform offers presence detection by looking at connected devices to a [AVM Fritz!Box](http://avm.de/produkte/fritzbox/) based router.
 
+## {% linkable_title Configuration %}
+
 <p class='note warning'>
 It might be necessary to install additional packages: <code>$ sudo apt-get install libxslt-dev libxml2-dev python3-lxml</code>
 If you are working with the All-in-One installation, you may also need to execute also within your virtual environment the command <code> pip install lxml</code>; be patient this will take a while.</p>

source/_components/device_tracker.google_maps.markdown

@@ -29,9 +29,9 @@ To integrate Google Maps Location Sharing in Home Assistant, add the following s
 ```yaml
 # Example configuration.yaml entry
 device_tracker:
-  platform: google_maps
-  username: example@gmail.com
-  password: password
+  - platform: google_maps
+    username: YOUR_USERNAME
+    password: YOUR_PASSWORD
 ```
 
 {% configuration %}

source/_components/device_tracker.icloud.markdown

@@ -33,9 +33,11 @@ Configuration variables:
 - **username** (*Required*): The username for the iCloud account.
 - **password** (*Required*): The password for your given username.
 - **account_name** (*Optional*): The friendly name for the account_name. If this isn't given, it will use the account_name of the username (so the part before the `@` in the email address).
+- **max_interval** (*Optional*): Maximum interval in minutes between subsequent location upates. This tracker uses dynamic intervals for requesting location updates. When iphone is stationary, interval will eventually be set to `max_interval` to save battery. When iphone starts moving again interval will be dynamically updated to 1 min. Note that updating interval to 1 min might be delayed by maximum `max_interval` minutes. Default is 30 min. Minimum value is 1 min.
+- **gps_accuracy_threshold** (*Optional*): iCloud location updates come with some gps_accuracy varying from 10 to 5000 meters. This setting defines the accuracy threshold in meters for a location update. Less accurate updates will be discarded by this tracker. This allows more precise location monitoring and fewer false positive zone changes. Default is 1000 meters.
 
 <p class='note warning'>
-This may cause battery drainage as it wakes up your device to get the current location.
+Low `max_interval` may cause battery drainage as it wakes up your device to get the current location.
 </p>
 
 <p class='note warning'>
@@ -48,7 +50,7 @@ To disable the drainage of the battery, a dynamic interval is being used for eac
 2 Factor Authentication is the improved version of 2 Steps Authentication, this is still not supported by the pyicloud library. Therefore it's not possible to use it with the device_tracker yet.
 
 4 services are available for this component:
-- **icloud_update**: This service can be used to ask for an update of a certain iDevice. The `account_name` and `device_name` are optional.
+- **icloud_update**: This service can be used to ask for an update of a certain iDevice. The `account_name` and `device_name` are optional. Request will result in new Home Assistant [state_changed](/docs/configuration/events/#event-state_changed) event describing current iphone location. Can be used in automations when manual location update is needed, e.g. to check if anyone is home when door's been opened.
 - **icloud_lost_iphone**: This service will play the Lost iPhone sound on a certain iDevice. The `account_name` and `device_name` are optional.
 - **icloud_set_interval**: This service will change the dynamic interval of an iDevice. The `account_name` and `device_name` are optional. If `interval` is used in the service_data, the iDevice will be updated with that new interval. That interval will be fixed until the iDevice changes zone or if this service is called again. If `interval` isn't used in the service_data, the interval for that iDevice will revert back to its default dynamic interval based on its current zone, its distance towards home and its battery level.
 - **icloud_reset_account**: This service can be used to reset an iCloud account. This is helpful when not all devices are being found by the component or if you have added a new iDevice to your account. The `account_name` is optional.

source/_components/device_tracker.markdown

@@ -40,6 +40,10 @@ The following optional parameters can be used with any platform. However device
 | `consider_home`      | 180     | Seconds to wait till marking someone as not home after not being seen. This parameter is most useful for households with Apple iOS devices that go into sleep mode while still at home to conserve battery life. iPhones will occasionally drop off the network and then re-appear. `consider_home` helps prevent false alarms in presence detection when using IP scanners such as Nmap. `consider_home` accepts various time representations, (e.g., the following all represents 3 minutes: `180`, `0:03`, `0:03:00`)  |
 | `new_device_defaults`|         | Default values for new discovered devices. Available options `track_new_devices` (default: `True`), `hide_if_away` (default: `False`)                                                                                                                                                                                                                                                     |
 
+<p class='note'>
+  Note that setting `track_new_devices: False` will still result in new devices being recorded in `known_devices.yaml`, but they won't be tracked (`track: no`).
+</p>
+
 The extended example from above would look like the following sample:
 
 ```yaml

source/_components/device_tracker.meraki.markdown

@@ -11,8 +11,21 @@ logo: meraki.png
 ha_category: Presence Detection
 ha_release: "0.60"
 ---
-Use your `Meraki AP` as device tracker. Note that Meraki will see all devices, not only connected to the network.
-Follow instructions [here](https://meraki.cisco.com/technologies/location-analytics-api) how to enable Location Analytics. 
+
+Use your Meraki AP as device tracker. Note that Meraki will see all devices, not only connected to the network.
+
+### {% linkable_title Prerequisites %}
+
+1. Go to Network-wide/General page, and find the Location and scanning section.
+1. Make sure analytics and Scanning API are both enabled.
+1. Make note of the Validator string, which will be used in the `device_tracker` configuration.
+1. Click **Add a Post URL**:
+  1. Set the Post URL to `https://YOUR_HOSTNAME/api/meraki?api_password=YOUR_HASS_PASSWORD`
+  1. Set the Secret to a randomly generated string, and make note of it for the `device_tracker` configuration.
+  1. Make sure the API Version is set to `2.0`.
+  1. Hit **Save** in the bottom right of the page.
+
+## {% linkable_title Configuration %}
 
 After you configure access to the Meraki CMX API, add the following to your `configuration.yaml` file:
 
@@ -24,14 +37,13 @@ device_tracker:
     validator: meraki_validator
 ```
 
-
 {% configuration %}
   secret:
-    description: Secret code added in Meraki
+    description: Secret code added in Meraki.
     required: true
     type: string
   validator:
-    description: Validation string from Meraki
+    description: Validation string from Meraki.
     required: true
     type: string
 {% endconfiguration %}

source/_components/device_tracker.netgear.markdown

@@ -13,7 +13,6 @@ ha_iot_class: "Local Polling"
 ha_release: pre 0.7
 ---
 
-
 This platform allows you to detect presence by looking at connected devices to a [Netgear](http://www.netgear.com/) device.
 
 To use this device tracker in your installation, add the following to your `configuration.yaml` file:
@@ -29,10 +28,18 @@ device_tracker:
 
 Configuration variables:
 
-- **host** (*Optional*): The IP address of your router, e.g., `192.168.1.1`. If not provided `routerlogin.net` will be used.
-- **username** (*Optional*): The username of an user with administrative privileges. If not provided `admin` will be used.
-- **port** (*Optional*): The port your router communicates with (defaults to `5000`, but `80` is also known to be used on some models).
+- **url** (*Optional*): The base URL, e.g., `http://routerlogin.com:5000` for example. If not provided `host` and `port` are used. If none provided autodetection of the URL will be used.
+- **host** (*Optional*): The IP address of your router, e.g., `192.168.1.1`.
+- **port** (*Optional*): The port your router communicates with.
+- **username** (*Optional*): The username of a user with administrative privileges. If not provided `admin` will be used.
 - **password** (*Required*): The password for your given admin account.
+- **devices** (*Optional*): If provided only specified devices will be reported. Can be MAC address or the device name as reported in the Netgear UI.
+- **exclude** (*Optional*): Devices to exclude from the scan.
+- **accesspoints** (*Optional*): Also track devices on the specified APs. Only supports MAC address.
+
+When `accesspoints` is specified an extra device will be reported for each device connected to the APs specified here, as `MY-LAPTOP on RBS40`. `Router` will be reported as AP name for the main AP. Only tested with Orbi.
+
+The use of `devices` or `exclude` is recommended when using `accesspoints` to avoid having a lot of entries.
 
 List of models that are known to use port 80:
 - Nighthawk X4S - AC2600 (R7800)

source/_components/device_tracker.tplink.markdown

@@ -41,7 +41,7 @@ For Archer C9 models running firmware version 150811 or later please use the enc
 2. Type in the password you use to login into the password field.
 3. Click somewhere else on the page so that the password field is not selected anymore.
 4. Open the JavaScript console of your browser (usually by pressing F12 and then clicking on "Console").
-5. Type ```document.getElementById("login-password").value;```.
+5. Type `document.getElementById("login-password").value;` or `document.getElementById("pcPassword").value;`, depending on your firmware version.
 6. Copy the returned value to your Home Assistant configuration as password.
 
 See the [device tracker component page](/components/device_tracker/) for instructions how to configure the people to be tracked.

source/_components/discoverable.markdown

@@ -23,7 +23,7 @@ for state in hass.states():
 To enable `discovery` in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 discoverable:
   expose_password: yes
 ```

source/_components/eufy.markdown

@@ -2,7 +2,7 @@
 layout: page
 title: "Eufy"
 description: "Instructions on how to integrate Eufy devices into Home Assistant."
-date: 2018-05-09 19:00
+date: 2018-04-09 19:00
 sidebar: true
 comments: false
 sharing: true
@@ -12,7 +12,7 @@ ha_category: Hub
 ha_release: 0.68
 ---
 
-The `eufy` component is the main component to integrate various [eufy](http://https://www.eufylife.com/) devices with Home Assistant.
+The `eufy` component is the main component to integrate various [eufy](https://www.eufylife.com/) devices with Home Assistant.
 
 Supported devices will be discovered after the `eufy` component is configured:
 

source/_components/fan.mqtt.markdown

@@ -15,6 +15,8 @@ ha_iot_class: depends
 
 The `mqtt` fan platform lets you control your MQTT enabled fans.
 
+## {% linkable_title Configuration %}
+
 In an ideal scenario, the MQTT device will have a `state_topic` to publish state changes. If these messages are published with a `RETAIN` flag, the MQTT fan will receive an instant state update after subscription and will start with the correct state. Otherwise, the initial state of the fan will be `false` / `off`.
 
 When a `state_topic` is not available, the fan will work in optimistic mode. In this mode, the fan will immediately change state after every command. Otherwise, the fan will wait for state confirmation from the device (message from `state_topic`).
@@ -24,7 +26,7 @@ Optimistic mode can be forced even if a `state_topic` is available. Try to enabl
 To enable MQTT fans in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 fan:
   - platform: mqtt
     command_topic: "bedroom_fan/on/set"
@@ -155,7 +157,7 @@ In this section you find some real life examples of how to use this fan.
 The example below shows a full configuration for a MQTT fan.
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 fan:
   - platform: mqtt
     name: "Bedroom Fan"

source/_components/fan.template.markdown

@@ -61,7 +61,7 @@ fan:
         required: false
         type: string
       value_template:
-        description: "Defines a template to get the state of the fan. Valid value: 'on'/'off'
+        description: "Defines a template to get the state of the fan. Valid value: 'on'/'off'"
         required: true
         type: template
       speed_template:
@@ -69,7 +69,7 @@ fan:
         required: false
         type: template
       oscillating_template:
-        description: Defines a template to get the osc state of the fan. Valid value: True/False
+        description: "Defines a template to get the osc state of the fan. Valid value: True/False"
         required: false
         type: template
       turn_on:

source/_components/folder_watcher.markdown

@@ -13,13 +13,14 @@ ha_iot_class: "Local Polling"
 ha_release: 0.67
 ---
 
-This component adds [Watchdog](https://pythonhosted.org/watchdog/) file system monitoring, publishing events on the Home Assistant bus on the creation/deletion/modification of files. The monitored `event_type` are:
+This component adds [Watchdog](https://pythonhosted.org/watchdog/) file system monitoring, publishing events on the Home Assistant bus on the creation/deletion/modification of files within configured folders. The monitored `event_type` are:
+
 * `created`
 * `deleted`
 * `modified`
 * `moved`
 
-Note that by default folder monitoring is recursive, meaning that the contents of sub-folders are also monitored.
+Configured folders must be added to [whitelist_external_dirs](/docs/configuration/basic/). Note that by default folder monitoring is recursive, meaning that the contents of sub-folders are also monitored.
 
 To enable the Folder Watcher component in your installation, add the following to your `configuration.yaml` file:
 

source/_components/fritzbox.markdown

@@ -13,13 +13,14 @@ ha_release: 0.68
 ha_iot_class: "Local Polling"
 ---
 
-The [AVM](www.avm.de) Fritzbox component for Home Assistant allows you to integrate the switch and climate devices.
+The [AVM](https://en.avm.de) Fritzbox component for Home Assistant allows you to integrate the switch and climate devices.
 
 #### {% linkable_title Tested Devices %}
 
-- [FRITZ!Box 6490 Cable](https://avm.de/produkte/fritzbox/fritzbox-6490-cable/)
-- [FRITZ!DECT 200](https://avm.de/produkte/fritzdect/fritzdect-200/)
-- [Eurotronic Comet DECT](https://www.eurotronic.org/produkte/comet-dect.html)
+- [FRITZ!Box 6490 Cable](https://en.avm.de/products/fritzbox/fritzbox-6490-cable/)
+- [FRITZ!Box 7590](https://en.avm.de/products/fritzbox/fritzbox-7590/)
+- [FRITZ!DECT 200](https://en.avm.de/products/fritzdect/fritzdect-200/)
+- [Eurotronic Comet DECT](https://www.eurotronic.org/en/products/comet-dect.html)
 
 
 ## {% linkable_title Setup %}
@@ -34,21 +35,21 @@ fritzbox:
 ```
 
 {% configuration %}
-  devices:
-    description: A list of Fritzbox devices.
-    required: true
-    type: map
-    keys:
-      host:
-        description: The hostname or IP address of the Fritzbox.
-        required: true
-        type: optional
-      username:
-        description: The username for Smart Home access.
-        required: true
-        type: string
-      password:
-        description: The password of the user.
-        required: true
-        type: string
+devices:
+  description: A list of Fritzbox devices.
+  required: true
+  type: map
+  keys:
+    host:
+      description: The hostname or IP address of the Fritzbox.
+      required: true
+      type: optional
+    username:
+      description: The username for Smart Home access.
+      required: true
+      type: string
+    password:
+      description: The password of the user.
+      required: true
+      type: string
 {% endconfiguration %}

source/_components/google_assistant.markdown

@@ -25,6 +25,8 @@ The Google Assistant component requires a bit more setup than most due to the wa
 To use Google Assistant, your Home Assistant configuration has to be externally accessible with a hostname and SSL certificate. If you haven't already configured that, you should do so before continuing.
 </p>
 
+## {% linkable_title Configuration %}
+
 To enable this, add the following lines to your `configuration.yaml` file:
 
 ```yaml

source/_components/hive.markdown

@@ -14,11 +14,13 @@ ha_iot_class: "Cloud Polling"
 ---
 
 
-This Hive component is the main component to set up and integrate all supported Hive devices. Once configured with the minimum required details it will detect and add all your Hive devices into Home Assistant, including support for multizone heating.
+The `hive` component is the main component to set up and integrate all supported Hive devices. Once configured with the minimum required details it will detect and add all your Hive devices into Home Assistant, including support for multizone heating.
 
 This component uses the unofficial API used in the official Hive website [https://my.hivehome.com](https://my.hivehome.com), and you will need to use the same Username and Password you use on the Hive website to configure this Hive component in Home Assistant.
 
-To add your Hive devices into your Home Assistant installation, using the default scan_interval, add the following to your 'configuration.yaml' file:
+
+
+To add your Hive devices into your Home Assistant installation, add the following to your `configuration.yaml` file:
 
 ```yaml
 # Example configuration.yaml entry

source/_components/homekit.markdown

@@ -39,6 +39,10 @@ The `HomeKit` component allows you to forward entities from Home Assistant to Ap
         required: false
         type: int
         default: 51827
+      ip_address:
+        description: The local network IP address. Only necessary if the default from Home Assistant does not work.
+        required: false
+        type: string
       filter:
         description: Filter entities to available in the `Home` app. ([Configure Filter](#configure-filter))
         required: false
@@ -77,6 +81,9 @@ The `HomeKit` component allows you to forward entities from Home Assistant to Ap
                 default: ''
 {% endconfiguration %}
 
+<p class='note'>
+  If you use Z-Wave, or `discovery:` you'll need to disable auto-start, see the [section below](#disable-auto-start) for details on how to do this. You'll then need to start the HomeKit component once Z-Wave is ready, or an appropriate delay to allow your entities to be discovered.
+</p>
 
 ## {% linkable_title Setup %}
 
@@ -116,7 +123,7 @@ A common situation might be if you decide to disable parts of the configuration
 
 Depending on your individual setup, it might be necessary to disable `Auto Start` for all accessories to be available for `HomeKit`. Only those entities that are fully setup when the `HomeKit` component is started, can be added. To start `HomeKit` when `auto_start: False`, you can call the service `homekit.start`.
 
-This can be automated using an `automation`.
+If you have Z-Wave entities you want exposed to HomeKit then you'll need to disable auto start and then start it after the Z-Wave mesh is ready. This is because the Z-Wave entities won't be fully set up until then. This can be automated using an automation:
 
 {% raw %}
 ```yaml
@@ -134,6 +141,8 @@ automation:
 ```
 {% endraw %}
 
+For a general delay where your component doesn't generate an event, you can also do:
+
 {% raw %}
 ```yaml
 # Example using a delay after start of Home Assistant
@@ -194,19 +203,20 @@ The following components are currently supported:
 | Component | Type Name | Description |
 | --------- | --------- | ----------- |
 | alarm_control_panel | SecuritySystem | All security systems. |
-| binary_sensor | Sensor | Support for `CO2`, `Gas`, `Moisture`, `Motion`, `Occupancy`, `Opening` and `Smoke` device classes. Defaults to the `Occupancy` device class for everything else. |
+| binary_sensor | Sensor | Support for `co2`, `door`, `garage_door`, `gas`, `moisture`, `motion`, `occupancy`, `opening`, `smoke` and `window` device classes. Defaults to the `occupancy` device class for everything else. |
 | climate | Thermostat | All climate devices. |
 | cover | GarageDoorOpener | All covers that support `open` and `close` and have `garage` as their `device_class`. |
 | cover | WindowCovering | All covers that support `set_cover_position`. |
 | cover | WindowCovering | All covers that support `open_cover` and `close_cover` through value mapping. (`open` -> `>=50`; `close` -> `<50`) |
 | cover | WindowCovering | All covers that support `open_cover`, `stop_cover` and `close_cover` through value mapping. (`open` -> `>70`; `close` -> `<30`; `stop` -> every value in between) |
+| device_tracker | Sensor | Support for `occupancy` device class. |
 | light | Light | Support for `on / off`, `brightness` and `rgb_color`. |
 | lock | DoorLock | Support for `lock / unlock`. |
-| sensor | TemperatureSensor | All sensors that have `Celsius` and `Fahrenheit` as their `unit_of_measurement` or `temperature` as their `device_class`. |
-| sensor | HumiditySensor | All sensors that have `%` as their `unit_of_measurement` or `humidity` as their `device_class`. |
+| sensor | TemperatureSensor | All sensors that have `Celsius` or `Fahrenheit` as their `unit_of_measurement` or `temperature` as their `device_class`. |
+| sensor | HumiditySensor | All sensors that have `%` as their `unit_of_measurement` and `humidity` as their `device_class`. |
 | sensor | AirQualitySensor | All sensors that have `pm25` as part of their `entity_id` or `pm25` as their `device_class` |
 | sensor | CarbonDioxideSensor | All sensors that have `co2` as part of their `entity_id` or `co2` as their `device_class` |
-| sensor | LightSensor | All sensors that have `lm`/`lux` as their `unit_of_measurement` or `light` as their `device_class` |
+| sensor | LightSensor | All sensors that have `lm` or `lx` as their `unit_of_measurement` or `illuminance` as their `device_class` |
 | switch / remote / input_boolean / script | Switch | All represented as switches. |
 
 

source/_components/homekit_controller.markdown

@@ -22,8 +22,8 @@ ha_iot_class: "Local Polling"
 
 There is currently support for the following device types within Home Assistant:
 
-- [Light](../light.homekit_controller)
-- [Switch](../switch.homekit_controller)
+- [Light](/components/light.homekit_controller/)
+- [Switch](/components/switch.homekit_controller/)
 
 The component will be automatically configured if the [`discovery:`](/components/discovery/) component is enabled and an enable entry added for HomeKit:
 

source/_components/insteon_plm.markdown

@@ -63,26 +63,52 @@ a responder or a controller.
 
 In order for any two Insteon devices to talk with one another, they must be 
 linked. For an overview of device linking please read the Insteon page on
-[understanding linking]. Currently Insteon PLM does not support software
-linking of devices. If you need software that can link your devices (if you 
-are using a USB Stick PLM for example), you can download [HouseLinc] which runs
-on any Windows PC, or you can use [Insteon Terminal] which is open source and 
-runs on most platforms. HouseLinc is no longer supported by SmartHome but it 
-still works. Insteon Terminal is a very useful tool but please read the 
-disclaimers carefully, they are important.
+[understanding linking]. The Insteon PLM module supports All-Linking through 
+[Development Tools] service calls. The following services are available:
+
+In order for any two Insteon devices to talk with one another, they must be 
+linked. For an overview of device linking, please read the Insteon page on
+[understanding linking]. The Insteon PLM module supports All-Linking through 
+[Development Tools] service calls. The following services are available:
+- **insteon_plm.add_all_link**: Tells the Insteon Modem (IM) start All-Linking 
+mode. Once the IM is in All-Linking mode, press the link button on the device 
+to complete All-Linking.
+- **insteon_plm.delete_all_link**: Tells the Insteon Modem (IM) to remove an 
+All-Link record from the All-Link Database of the IM and a device. Once the IM 
+is set to delete the link, press the link button on the corresponding device 
+to complete the process.
+- **insteon_plm.load_all_link_database**: Load the All-Link Database for a 
+device. WARNING - Loading a device All-Link database is very time consuming 
+and inconsistent. This may take a LONG time and may need to be repeated to 
+obtain all records.
+- **insteon_plm.print_all_link_database**: Print the All-Link Database for a 
+device. Requires that the All-Link Database is loaded into memory.
+- **insteon_plm.print_im_all_link_database**: Print the All-Link Database for 
+the INSTEON Modem (IM).
+
+If you are looking for more advanced options, you can use the 
+[insteonplm_interactive] command line tool that is distributed with the 
+[insteonplm] Python module. Please see the documentation on the [insteonplm] 
+GitHub site. Alternatively, you can download [HouseLinc] which runs on any 
+Windows PC, or you can use [Insteon Terminal] which is open source and runs 
+on most platforms. SmartHome no longer supports HouseLinc, but it still 
+works. Insteon Terminal is a very useful tool but please read the disclaimers 
+carefully, they are important.
 
 [understanding linking]: http://www.insteon.com/support-knowledgebase/2015/1/28/understanding-linking
+[Development Tools]: https://www.home-assistant.io/docs/tools/dev-tools/
 [HouseLinc]: https://www.smarthome.com/houselinc.html
 [Insteon Terminal]: https://github.com/pfrommerd/insteon-terminal
+[insteonplm_interactive]: https://github.com/nugget/python-insteonplm#command-line-interface
 
 ### {% linkable_title Customization %} 
 
-The only configuration item that is absolutely necessary is the port so that
-Home Assistant can connect to the PLM.  This will expose all the supported INSTEON
-devices which exist in the modem's ALL-Link database.  However, devices will
-only be shown by their INSTEON hex address (e.g., "1A.2B.3C") which can be a bit
-unwieldy.  As you link and unlink devices using the 'Set' buttons, they'll be
-added and removed from Home Assistant automatically.
+The only configuration item that is absolutely necessary is the port so that 
+Home Assistant can connect to the PLM. This will expose all the supported 
+INSTEON devices which exist in the modem’s ALL-Link database. However, devices 
+will only be shown by their INSTEON hex address (e.g., “1A.2B.3C”) which can 
+be a bit unwieldy. As you link and unlink devices using the ‘Set’ buttons, 
+they’ll be added and removed from Home Assistant automatically.
 
 You can use the normal Home Assistant [device customization] section of your
 configuration to assign friendly names and special icons to your devices.  This
@@ -123,7 +149,9 @@ insteon_plm:
       cat: 0x10
       subcat: 0x11     
 ```
+
 ### {% linkable_title What NOT to do %}
+
 Insteon PLM is a top level component and device discovery will identify 
 the Home Assistant platform the device belongs in. As such, do not 
 declare Insteon devices in other platforms. For example, this configuration
@@ -134,4 +162,3 @@ light:
   - platform: insteon_plm
     address: 1a2b3c
 ```
-

source/_components/juicenet.markdown

@@ -15,10 +15,12 @@ ha_release: 0.47
 
 The `juicenet` sensor platform pulls data from a [JuiceNet](https://emotorwerks.com/products/juicenet/) charging station equipped with a wifi connection. It will access and make available all of the devices attached to your account.
 
+## {% linkable_title Configuration %}
+
 To enable the platform in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 juicenet:
     access_token: ACCESS_TOKEN
 ```

source/_components/light.eufy.markdown

@@ -1,8 +1,8 @@
 ---
 layout: page
-title: "EufyLights"
+title: "Eufy Lights"
 description: "Instructions on how to integrate Eufy LED lights into Home Assistant."
-date: 2018-05-09 19:00
+date: 2018-04-09 19:00
 sidebar: true
 comments: false
 sharing: true

source/_components/light.hive.markdown

@@ -14,12 +14,13 @@ ha_iot_class: "Cloud Polling"
 ---
 
 
-The 'hive' light component integrates your Hive lights into Home Assistant, enabling control of various settings, depending on the model light.
+The `hive` light platform integrates your Hive lights into Home Assistant, enabling control of various settings, depending on the model light.
 
-The Hive light component supports the following Hive products:
-- **Hive Active Light Dimmable**
-- **Hive Active Light Cool to Warm White**
-- **Hive Active Light Color Changing**
+The platform supports the following Hive products:
+
+- Hive Active Light Dimmable
+- Hive Active Light Cool to Warm White
+- Hive Active Light Color Changing
 
 
 <p class='note'>

source/_components/light.mochad.markdown

@@ -11,13 +11,14 @@ ha_category: Light
 ha_release: 0.51
 ---
 
-The `mochad` light platform lets you control an X10 enabled dimmer/light
-device.
+The `mochad` light platform lets you control an X10 enabled dimmer/light device.
+
+
 
 To enable this sensor, you first have to set up the [mochad component](/components/mochad/) and then add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 light:
   - platform: mochad
     devices:

source/_components/light.mqtt.markdown

@@ -14,6 +14,8 @@ ha_iot_class: depends
 
 The `mqtt` light platform lets you control your MQTT enabled lights. It supports setting brightness, color temperature, effects, flashing, on/off, RGB colors, transitions, XY colors and white values.
 
+## {% linkable_title Configuration %}
+
 In an ideal scenario, the MQTT device will have a state topic to publish state changes. If these messages are published with a `RETAIN` flag, the MQTT light will receive an instant state update after subscription and will start with the correct state. Otherwise, the initial state of the switch will be `false` / `off`.
 
 When a state topic is not available, the light will work in optimistic mode. In this mode, the light will immediately change state after every command. Otherwise, the light will wait for state confirmation from the device (message from `state_topic`).
@@ -21,7 +23,7 @@ When a state topic is not available, the light will work in optimistic mode. In
 Optimistic mode can be forced, even if the `state_topic` is available. Try to enable it, if experiencing incorrect light operation.
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 light:
   - platform: mqtt
     command_topic: "office/rgb1/light/switch"
@@ -207,7 +209,7 @@ To enable a light with brightness and RGB support in your installation, add the
 
 {% raw %}
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 light:
   - platform: mqtt
     name: "Office Light RGB"
@@ -232,7 +234,7 @@ light:
 To enable a light with brightness (no RGB version) in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 light:
   - platform: mqtt
     name: "Office light"
@@ -251,7 +253,7 @@ light:
 To enable a light that sends only brightness topics to turn it on, add the following to your `configuration.yaml` file. The `command_topic` is only used to send an off command in this case:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 light:
   - platform: mqtt
     name: "Brightness light"

source/_components/lock.mqtt.markdown

@@ -24,7 +24,7 @@ Optimistic mode can be forced, even if state topic is available. Try to enable i
 To enable MQTT locks in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 lock:
   - platform: mqtt
     command_topic: "home/frontdoor/set"

source/_components/matrix.markdown

@@ -0,0 +1,136 @@
+---
+layout: page
+title: "Matrix"
+description: "Matrix chatbot support"
+date: 2018-03-25 18:50
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: matrix.png
+ha_category: Hub
+ha_version: 0.69
+---
+
+This component allows you to send messages to matrix rooms, as well as to react to messages in matrix rooms. Reacting to commands is accomplished by firing an event when one of the configured commands is triggered.
+
+```yaml
+# Example configuration.yaml entry
+matrix:
+  homeserver: https://matrix.org
+  username: "@my_matrix_user:matrix.org"
+  password: supersecurepassword
+  rooms:
+    - "#hasstest:matrix.org"
+  commands:
+    - word: my_command
+      name: my_command
+```
+
+Configuration variables:
+
+{% configuration %}
+username:
+  description: "The matrix username that home assistant should use to log in. *Note*: You must specify a full matrix ID here, including the homeserver domain, e.g. '@my_matrix_bot:matrix.org'. Please note also that the '@' character has a special meaning in YAML, so this must always be given in quotes."
+  required: true
+  type: string
+password:
+  description: The password for your Matrix account.
+  required: true
+  type: string
+homeserver:
+  description: "The full URL for your homeserver. If you use the defauls matrix.org homeserver, this is 'https://matrix.org'."
+  required: true
+  type: string
+verify_ssl:
+  description: Verify the homeservers certificate.
+  required: false
+  type: string
+  default: true
+rooms:
+  description: "The list of rooms that the bot should join and listen for commands (see below) in. While you can limit the list of rooms that a certain command applies to on a per-command basis (see below), you must still list all rooms here that commands should be received in. Rooms can be given either by their internal ID (e.g., '!cURbafjkfsMDVwdRDQ:matrix.org') or any of their aliases (e.g., '#matrix:matrix.org')."
+  required: false
+  type: [string]
+  default: empty
+commands:
+  description: "A list of commands that the bot should listen for. If a command is triggered (via its *word* or *expression*, see below), an event is fired that you can handle using automations. Every command consists of these possible configuration options:"
+  required: false
+  type: map
+  default: empty
+  keys:
+    word:
+      description: "Specifies a word that the bot should listen for. If you specify 'my_command' here, the bot will react to any message starting with '!my_command'."
+      required: false
+      type: string
+    expression:
+      description: "Specifies a regular expression (in python regexp syntax) that the bot should listen to. The bot will react to any message that matches the regular expression."
+      required: false
+      type: string
+    name:
+      description: "The name of the command. This will be an attribute of the event that is fired when this command triggers."
+      required: true
+      type: string
+    rooms:
+      description: "A list of rooms that the bot should listen for this command in. If this is not given, the *rooms* list from the main config is used. Please note that every room in this list must also be in the main *room* config."
+      required: false
+      type: [string]
+      default: empty
+{% endconfiguration %}
+
+### {% linkable_title Event Data %}
+
+If a command is triggered, a `matrix_command` event is fired. The event contains the name of the command in the `name` field. If the command is a word command that has no name set, the `name` field contains the word instead.
+
+If the command is a word command, the `data` field contains a list of the command's arguments, i.e., everything that stood behind the word, split at spaces. If the command is an expression command, the `data` field contains the [group dictionary](https://docs.python.org/3.6/library/re.html?highlight=re#re.match.groupdict) of the regular expression that matched the message.
+
+### {% linkable_title Comprehensive Configuration Example %}
+
+This example also uses the [matrix `notify` platform](/components/notify.matrix/).
+
+```yaml
+# The Matrix component
+matrix:
+  homeserver: https://matrix.org
+  username: "@my_matrix_user:matrix.org"
+  password: supersecurepassword
+  rooms:
+    - "#hasstest:matrix.org"
+    - "#someothertest:matrix.org"
+  commands:
+    - word: testword
+      rooms:
+        - "#someothertest:matrix.org"
+    - expression: "My name is (?P<name>.*)"
+      name: introduction
+
+notify:
+  - name: matrix_notify
+    platform: matrix
+    default_room: "#hasstest:matrix.org"
+
+automation:
+  - alias: 'React to !testword'
+    trigger:
+      platform: event
+      event_type: matrix_command
+      event_data:
+        command: testword
+    action:
+      service: notify.matrix_notify
+      data:
+        message: 'It looks like you wrote !testword'
+  - alias: 'React to an introduction'
+    trigger:
+      platform: event
+      event_type: matrix_command
+      event_data:
+        command: introduction
+    action:
+      service: notify.matrix_notify
+      data_template:
+        message: "Hello {{trigger.event.data.name}}"
+```
+
+This configuration will:
+- Listen for "!testword" in the room "#someothertest:matrix.org" (and *only*) there. If such a message is encountered, it will answer with "It looks like you wrote !testword" into the "#hasstest:matrix.org" channel.
+- Listen in both rooms for any message matching "My name is <any string>" and answer with "Hello <the string>" into "#hasstest:matrix.org".

source/_components/maxcube.markdown

@@ -58,4 +58,9 @@ maxcube:
     required: false
     type: int
     default: 62910
+  scan_interval:
+    description: The update interval in seconds
+    required: false
+    type: int
+    default: 300
 {% endconfiguration %}

source/_components/media_player.onkyo.markdown

@@ -16,6 +16,8 @@ ha_iot_class: "Local Polling"
 
 The `onkyo` platform allows you to control a [Onkyo](http://www.onkyo.com/) and some recent [Pioneer](http://www.pioneerelectronics.com) receivers from Home Assistant. Please be aware that you need to enable "Network Standby" for this component to work in your Hardware.
 
+## {% linkable_title Configuration %}
+
 To add an Onkyo or Pioneer receiver to your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
@@ -37,6 +39,10 @@ name:
   description: Name of the device. (*Required if host is specified*)
   required: false
   type: string
+max_volume:
+  description: Maximum volume. Defaults to 80.
+  required: false
+  type: number
 sources:
   description: A list of mappings from source to source name. Valid sources can be found below. A default list will be used if no source mapping is specified.
   required: false

source/_components/media_player.volumio.markdown

@@ -12,12 +12,11 @@ ha_category: Media Player
 ha_release: 0.41
 ---
 
-The `Volumio` platform allows you to control a [Volumio](http://volumio.org) media player
-from Home Assistant.
+The `Volumio` platform allows you to control a [Volumio](http://volumio.org) media player from Home Assistant.
 
+The preferred way to set up the Volumio platform is by enabling the [discovery component](/components/discovery/).
 
-To add a Volumio player to your installation, add the following to
-your `configuration.yaml` file.
+In case the discovery does not work, or you need specific configuration variables, you can add the following to your `configuration.yaml` file:
 
 ```yaml
 # Example configuration.yaml entry

source/_components/mochad.markdown

@@ -13,6 +13,8 @@ ha_release: 0.32
 
 The `mochad` component is the main component to integrate all X10 platforms being controlled by [mochad](https://sourceforge.net/projects/mochad/). Besides this component you will have to setup your X10 devices separately.
 
+## {% linkable_title Configuration %}
+
 To integrate your Mochad units with Home Assistant, add the following section to your `configuration.yaml` file:
 
 ```yaml
@@ -20,10 +22,20 @@ To integrate your Mochad units with Home Assistant, add the following section to
 mochad:
 ```
 
-Configuration variables:
+{% configuration %}
+host:
+  description: The host that mochad is running on.
+  required: false
+  type: string
+  default: localhost
+port:
+  description: The port that mochad is running on.
+  required: false
+  type: int
+  default: 1099
+{% endconfiguration %}
 
-- **host** (*Optional*): The host that mochad is running on. Defaults to `localhost`.
-- **port** (*Optional*): The port that mochad is running on. Defaults to `1099`.
+## {% linkable_title Example %}
 
 A full configuration sample could look like the one below:
 

source/_components/modbus.markdown

@@ -16,6 +16,8 @@ ha_iot_class: "Local Push"
 
 [Modbus](http://www.modbus.org/) is a serial communication protocol to control PLCs (Programmable logic controller). It currently supports sensors and switches which can be controlled over serial, TCP, and UDP connections.
 
+## {% linkable_title Configuration %}
+
 To add modbus to your installation, add the following to your `configuration.yaml` file:
 
 For a network connection:

source/_components/notify.clicksend.markdown

@@ -15,9 +15,12 @@ ha_release: 0.48
 
 The `clicksend` platform uses [ClickSend](https://clicksend.com) to deliver notifications from Home Assistant.
 
-### Get your ClickSend API Credentials
+## {% linkable_title Prerequisites %}
+
 Go to your [ClickSend Dashboard](https://dashboard.clicksend.com) section and create your new project. After creating your project, you should now be able to obtain your `username` and `api_key`.
 
+## {% linkable_title Configuration %}
+
 To add ClickSend to your installation, add the following to your Home Assistant `configuration.yaml` file:
 
 ```yaml

source/_components/notify.matrix.markdown

@@ -17,27 +17,21 @@ The `matrix` platform allows you to deliver notifications from Home Assistant to
 
 ## {% linkable_title Configuration %}
 
-To enable Matrix notifications in your installation, add the following to your `configuration.yaml` file:
+To enable Matrix notifications in your installation, you first need to configure
+the [Matrix component](/components/matrix/). Then, add the following to your `configuration.yaml` file:
 
 ```yaml
 # Example configuration.yaml entry
 notify:
   - name: NOTIFIER_NAME
     platform: matrix
-    homeserver: HOMESERVER
-    username: YOUR_USERNAME
-    password: YOUR_PASSWORD
     default_room: ROOM_ID_OR_ALIAS
 ```
 
 Configuration variables:
 
 - **name** (*Optional*): Setting the optional parameter `name` allows multiple notifiers to be created. The default value is `notify`. The notifier will bind to the service `notify.NOTIFIER_NAME`.
-- **homeserver** (*Required*): The base URL of the homeserver, where the notifier account is registered (e.g., `https://matrix.org`).
-- **username** (*Required*): The username of the notifying Matrix account.
-- **password** (*Required*): The password for the given Matrix account.
 - **default_room** (*Required*): The room all messages will be sent to, when no other target is given.
-- **verify_ssl** (*Optional*): Verify the homeservers certificate. Defaults to `true`.
 
 The target room has to be precreated, the room id can be obtained from the rooms settings dialog. Rooms by default have a canonical id of the form `"!<randomid>:homeserver.tld"`, but can also be allocated aliases like `"#roomname:homeserver.tld"`. Make sure to use quotes around the room id or alias to escape special characters (`!`, and `#`) in YAML. The notifying account may need to be invited to the room, depending on the individual rooms policies.
 

source/_components/pilight.markdown

@@ -19,6 +19,8 @@ This pilight hub connects to the [pilight-daemon](https://manual.pilight.org/pro
 
 The received and supported RF codes are put on the event bus of Home Assistant and are therefore directly usable by other components (e.g., automation). Additionally a send service is provided to send RF codes.
 
+## {% linkable_title Configuration %}
+
 To integrate pilight into Home Assistant, add the following section to your `configuration.yaml` file:
 
 ```yaml

source/_components/qwikswitch.markdown

@@ -60,16 +60,19 @@ On some QS Mobile servers button events are only generated for switches added to
 
 ### {% linkable_title Qwikswitch Sensors %}
 
-The sensor configuration is a list of sensors. Each sensor is configured with the following parameters:
+The sensor configuration is a list of sensors. Depending on the type, it will be a sensor or binary_sensor. Each sensor is configured with the following parameters:
 
 - **name** (*Required*): The sensor name from which the entity_id will be derived.
 - **id** (*Required*): A QS_Id
 - **type** (*Required*): The Qwikswitch sensor type. These could include:
-   - imod (up to 6 channels)
-   - door (single channel)
-   - qwikcord (Channel1 = CTavg, Channel 2 = CTsum)
+   - imod (binary_sensor, up to 6 channels)
+   - door (binary_sensor, single channel)
+   - qwikcord (Channel 1 = CTavg, Channel 2 = CTsum)
 - **channel** (*Optional, default=1*): The channel of interest. Refer to type above.
 
+The following parameters are only applicabe to binary_sensors (i.e. door/imod).
+- **invert** (*Optional, default=False): Invert the open/close state. 
+- **class** (*Optional, default=door): The [class](https://www.home-assistant.io/components/binary_sensor) or binary_sensor.
 
 Example sensor configuration:
 

source/_components/rainmachine.markdown

@@ -0,0 +1,71 @@
+---
+layout: page
+title: "RainMachine"
+description: "Instructions on how to integrate RainMachine units within Home Assistant."
+date: 2018-04-25 20:32
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: rainmachine.png
+ha_category: Hub
+ha_release: 0.69
+ha_iot_class: "Cloud Polling"
+---
+
+The `rainmachine` component is the main component to integrate all platforms
+related to [RainMachine smart Wi-Fi sprinkler controllers](http://www.rainmachine.com/).
+
+## {% linkable_title Base Configuration %}
+
+To connect to your RainMachine device, add the following to your
+`configuration.yaml` file:
+
+```yaml
+rainmachine:
+  ip_address: 192.168.1.100
+  password: YOUR_PASSWORD
+```
+
+To configure switch-related functionality, add configuration options beneath
+a `switches` key within the `rainmachine` sections of `configuration.yaml`
+as below:
+
+```yaml
+rainmachine:
+  ip_address: 192.168.1.100
+  password: YOUR_PASSWORD
+  switches:
+    # switch configuration options...
+```
+
+{% configuration %}
+ip_address:
+  description: the IP address or hostname of your RainMachine unit
+  required: optional
+  type: string
+password:
+  description: your RainMachine password.
+  required: true
+  type: string
+port:
+  description: the TCP port used by your unit for the REST API
+  required: false
+  type: int
+  default: 8080
+ssl:
+  description: whether communication with the local device should occur over HTTPS
+  required: false
+  type: boolean
+  default: true
+switches:
+  description: switch-related configuration options
+  required: false
+  type: map
+  keys:
+    zone_run_time:
+      description: the default number of seconds that a zone should run when turned on
+      required: false
+      type: int
+      default: 600
+{% endconfiguration %}

source/_components/remember_the_milk.markdown

@@ -51,7 +51,7 @@ Configuration variables:
 
 ### {% linkable_title Step 2: registering your account %}
 
-After saving the configuration, you need to (re-)start Home Assistant. On the first start you will notice a new "Configuration" panel appearing on the Home Assistant page. After opening the configuration page, follow the link "Remember The Milk login". This will take you to a login page where you have to log in with your normal Rember The Milk credentials. This will authorize Home Assistant to access your Remember The Milk account.
+After saving the configuration, you need to (re-)start Home Assistant. On the first start you will notice a new "Configuration" panel appearing on the Home Assistant page. After opening the configuration page, follow the link "Remember The Milk login". This will take you to a login page where you have to log in with your normal Remember The Milk credentials. This will authorize Home Assistant to access your Remember The Milk account.
 
 After that click on the "login completed" button. This will tell Home Assistant that you have completed the login process on the Remember The Milk page and Home Assistant should try to register with this account.
 

source/_components/sensor.fritzbox_callmonitor.markdown

@@ -14,10 +14,11 @@ ha_iot_class: "Local Polling"
 ---
 
 
-The `fritzbox_callmonitor` sensor monitors the call monitor exposed by [AVM Fritz!Box](http://avm.de/produkte/fritzbox/) routers
-on TCP port 1012. It will assume the values `idle`, `ringing`, `dialing`, or `talking` with the phone numbers involved contained in the state attributes.
+The `fritzbox_callmonitor` sensor monitors the call monitor exposed by [AVM Fritz!Box](http://avm.de/produkte/fritzbox/) routers on TCP port 1012. It will assume the values `idle`, `ringing`, `dialing` or `talking` with the phone numbers involved contained in the state attributes.
 It can also access the internal phone book of the router to look up the names corresponding to the phone numbers and store them in the state attributes.
 
+## {% linkable_title Configuration %}
+
 To activate the call monitor on your Fritz!Box, dial #96\*5\* from any phone connected to it.
 
 To use the Fritz!Box call monitor in your installation, add the following to your `configuration.yaml` file:
@@ -44,7 +45,7 @@ Configuration variables:
 The example below shows a full configuration for a call monitor with phone book support.
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: fritzbox_callmonitor
     name: Phone
@@ -61,8 +62,9 @@ sensor:
 
 This example shows how to send notifications whenever the sensor's state changes. You will get notified both when you receive a call and also when a call is placed.
 
+{% raw %}
 ```yaml
-# Example configuration.yml entry.
+# Example configuration.yaml entry.
 automation:
   - alias: "Notify about phone state"
     trigger:
@@ -73,7 +75,7 @@ automation:
         data:
           title: "Phone"
           message: >-
-            {% raw %}{% if is_state("sensor.phone", "idle") %}
+            {% if is_state("sensor.phone", "idle") %}
               Phone is idle
             {% elif is_state("sensor.phone", "dialing") %}
               Calling {{ states.sensor.phone.attributes.to_name }} ({{ states.sensor.phone.attributes.to }})
@@ -81,5 +83,6 @@ automation:
               Incoming call from {{ states.sensor.phone.attributes.from_name }} ({{ states.sensor.phone.attributes.from }})
             {% else %}
               Talking to {{ states.sensor.phone.attributes.with_name }} ({{ states.sensor.phone.attributes.with }})
-            {% endif %}{% endraw %}
+            {% endif %}
 ```
+{% endraw %}

source/_components/sensor.gitter.markdown

@@ -15,19 +15,27 @@ ha_release: 0.47
 
 This `gitter` sensor allows one to monitor a [Gitter.im](https://gitter.im) chatroom for unread messages.
 
+## {% linkable_title Configuration %}
+
 Visit [Gitter Developer Apps](https://developer.gitter.im/apps) to retrieve your "Personal Access Token".
 
 To use a Gitter sensor in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: gitter
     api_key: YOUR_API_TOKEN
 ```
 
-Configuration variables:
-
-- **api_key** (*Required*): Your Gitter.im API token.
-- **room** (*Optional*): Gitter room to monitor. Defaults to `home-assistant/home-assistant`
-
+{% configuration %}
+api_key:
+  description: Your Gitter.im API token.
+  required: true
+  type: string
+room:
+  description: Gitter room to monitor.
+  required: false
+  type: string
+  default: home-assistant/home-assistant
+{% endconfiguration %}

source/_components/sensor.hive.markdown

@@ -14,11 +14,12 @@ ha_iot_class: "Cloud Polling"
 ---
 
 
-The 'hive' sensor component exposes hive data as a sensor.
+The `hive` sensor component exposes Hive data as a sensor.
 
-The Hive sensor component exposes the following sensors:
-- **Hive Hub Online Status**
-- **Hive Outside Temperature**
+The platform exposes the following sensors:
+
+- Hive Hub Online Status
+- Hive Outside Temperature
 
 <p class='note'>
 Full configuration details can be found on the main [Hive component](/components/hive/) page.

source/_components/sensor.markdown

@@ -20,6 +20,7 @@ The way these sensors are displayed in the frontend can be modified in the [cust
 - **None**: Generic sensor. This is the default and doesn't need to be set.
 - **battery**: Percentage of battery that is left.
 - **humidity**: Percentage of humidity in the air.
+- **illuminance**: The current light level in lx or lm.
 - **temperature**: Temperature in °C or °F.
 
 <p class='img'>

source/_components/sensor.modbus.markdown

@@ -16,10 +16,12 @@ ha_iot_class: "Local Push"
 
 The `modbus` sensor allows you to gather data from [Modbus](http://www.modbus.org/) registers.
 
+## {% linkable_title Configuration %}
+
 To use your Modbus sensors in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   platform: modbus
   registers:

source/_components/sensor.mqtt.markdown

@@ -16,10 +16,12 @@ ha_iot_class: depends
 
 This `mqtt` sensor platform uses the MQTT message payload as the sensor value. If messages in this `state_topic` are published with *RETAIN* flag, the sensor will receive an instant update with last known value. Otherwise, the initial state will be undefined.
 
+## {% linkable_title Configuration %}
+
 To use your MQTT sensor in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: mqtt
     state_topic: "home/bedroom/temperature"
@@ -97,17 +99,17 @@ In this section you find some real life examples of how to use this sensor.
 
 ### {% linkable_title JSON attributes configuration %}
 
-The example sensor below shows a configuration example which uses JSON in the state topic to add extra attributes. It also makes use of the availability topic. Attributes can then be extracted in [Templates](configuration/templating/#attributes); Example to extract data from the sensor below {% raw %}'{{ states.sensor.bs_client_name.attributes.ClientName }}'{% endraw %}.
+The example sensor below shows a configuration example which uses JSON in the state topic to add extra attributes. It also makes use of the availability topic. Attributes can then be extracted in [Templates](/docs/configuration/templating/#attributes). For example, to extract the `ClientName` attribute from the sensor below, use a template similar to: {% raw %}`{{ state_attr('sensor.bs_rssi', 'ClientName') }}`{% endraw %}.
 
 {% raw %}
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: mqtt
-    state_topic: "HUISHS/BunnyShed/NodeHealthJSON"
     name: "BS RSSI"
-    unit_of_measurement: "dBm"
-    value_template: '{{ value_json.RSSI }}'
+    state_topic: "HUISHS/BunnyShed/NodeHealthJSON"
+    unit_of_measurement: 'dBm'
+    value_template: "{{ value_json.RSSI }}"
     availability_topic: "HUISHS/BunnyShed/status"
     payload_available: "online"
     payload_not_available: "offline"
@@ -123,7 +125,7 @@ sensor:
 
 ### {% linkable_title Get battery level %}
 
-If you are using the [Owntracks](/components/device_tracker.owntracks/) and enable the reporting of the battery level then you can use a MQTT sensor to keep track of your battery. A regular MQTT message from Owntracks looks like this: 
+If you are using the [OwnTracks](/components/device_tracker.owntracks/) and enable the reporting of the battery level then you can use a MQTT sensor to keep track of your battery. A regular MQTT message from OwnTracks looks like this: 
 
 ```bash
 owntracks/tablet/tablet {"_type":"location","lon":7.21,"t":"u","batt":92,"tst":144995643,"tid":"ta","acc":27,"lat":46.12}
@@ -133,13 +135,13 @@ Thus the trick is extracting the battery level from the payload.
 
 {% raw %}
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: mqtt
-    state_topic: "owntracks/tablet/tablet"
     name: "Battery Tablet"
-    unit_of_measurement: "%"
-    value_template: '{{ value_json.batt }}'
+    state_topic: "owntracks/tablet/tablet"
+    unit_of_measurement: '%'
+    value_template: "{{ value_json.batt }}"
 ```
 {% endraw %}
 
@@ -159,18 +161,18 @@ Then use this configuration example to extract the data from the payload:
 
 {% raw %}
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: mqtt
-    state_topic: 'office/sensor1'
-    name: 'Temperature'
+    name: "Temperature"
+    state_topic: "office/sensor1"
     unit_of_measurement: '°C'
-    value_template: '{{ value_json.temperature }}'
+    value_template: "{{ value_json.temperature }}"
   - platform: mqtt
-    state_topic: 'office/sensor1'
-    name: 'Humidity'
+    name: "Humidity"
+    state_topic: "office/sensor1"
     unit_of_measurement: '%'
-    value_template: '{{ value_json.humidity }}'
+    value_template: "{{ value_json.humidity }}"
 ```
 {% endraw %}
 
@@ -195,10 +197,10 @@ The configuration will look like the example below:
 
 {% raw %}
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: mqtt
-    state_topic: 'home/bathroom/analog/brightness'
-    name: Brightness
+    name: "Brightness"
+    state_topic: "home/bathroom/analog/brightness"
 ```
 {% endraw %}

source/_components/sensor.mqtt_room.markdown

@@ -16,6 +16,8 @@ ha_iot_class: depends
 
 The `mqtt_room` sensor platform allows you to detect the indoor location of devices using MQTT clients.
 
+## {% linkable_title Configuration %}
+
 To use this device tracker in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml

source/_components/sensor.mvglive.markdown

@@ -16,6 +16,8 @@ ha_iot_class: "Cloud Polling"
 
 The `mvglive` sensor will give you the departure time of the next bus, tram, subway, or train at the next station or stop in the Munich public transport network. Additional details such as the line number and destination are present in the attributes.
 
+## {% linkable_title Configuration %}
+
 To enable this sensor, add the following lines to your `configuration.yaml` file:
 
 ```yaml
@@ -42,7 +44,7 @@ Configuration variables:
 The example below shows a full configuration with three sensors that showcase the various configuration options.
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: mvglive
     nextdeparture:

source/_components/sensor.openevse.markdown

@@ -16,10 +16,12 @@ ha_iot_class: "Local Polling"
 
 This `openevse` sensor platform pulls data from an [OpenEVSE](https://www.openevse.com/) Charging station equipped with an ESP8266-based wifi connection.
 
+## {% linkable_title Configuration %}
+
 To enable this sensor in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: openevse
     host: IP_ADDRESS

source/_components/sensor.pilight.markdown

@@ -16,10 +16,12 @@ ha_iot_class: depends
 
 This `pilight` sensor platform for 433 MHz devices uses a value in the message payload as the sensor value. Unique identifiers (e.g., _uuid_) can be set to distinguish between multiple pilight devices. To use a pilight sensor the pilight Home Assistant hub has to be set up.
 
+## {% linkable_title Configuration %}
+
 To use your sensor via pilight, make sure it is [supported](https://wiki.pilight.org/doku.php/protocols) and add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: pilight
     variable: temperature

source/_components/sensor.postnl.markdown

@@ -0,0 +1,47 @@
+---
+layout: page
+title: PostNL Sensor
+description: "Instructions on how to set up PostNL sensors within Home Assistant."
+date: 2017-04-22 08:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: postnl.png
+ha_category: Sensor
+ha_release: 0.69
+ha_iot_class: "Cloud Polling"
+---
+
+The `postnl` platform allows one to track deliveries by [PostNL](https://www.postnl.nl) (Dutch Postal Services). To use this sensor, you need a [PostNL Account](https://jouw.postnl.nl). It is possible to add multiple accounts to your Home Assistant configuration.
+
+## {% linkable_title Configuration %}
+
+To enable this sensor, add the following lines to your `configuration.yaml`:
+
+```yaml
+sensors:
+  - platform: postnl
+    username: POSTNL_USERNAME
+    password: POSTNL_PASSWORD
+```
+
+{% configuration %}
+name:
+  description: Sensor name
+  required: false
+  default: "postnl"
+  type: string
+username:
+  description: Account username of jouw.postnl.nl
+  required: true
+  type: string
+password:
+  description: Account password of jouw.postnl.nl
+  required: true
+  type: string
+{% endconfiguration %}
+
+<p class='note warning'>
+This component is not affiliated with PostNL and retrieves date from the endpoints of the mobile application. Use at your own risk.
+</p>

source/_components/sensor.qnap.markdown

@@ -16,10 +16,12 @@ ha_iot_class: "Local Polling"
 
 This `qnap` sensor allows getting various statistics from your [QNAP NAS](https://www.qnap.com/en-us/).
 
+## {% linkable_title Configuration %}
+
 To use the `qnap` sensor in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: qnap
     host: IP_ADDRESS_OF_QNAP_NAS

source/_components/sensor.qwikswitch.markdown

@@ -13,6 +13,6 @@ ha_iot_class: "Local Push"
 ha_release: "0.67"
 ---
 
-The `qwikswitch` sensor platform allows you to control your [QwikSwitch](http://www.qwikswitch.co.za/) relays and dimmers as sensors from within Home Assistant.
+The `qwikswitch` sensor platform allows you to use your [QwikSwitch](http://www.qwikswitch.co.za/) sensors in Home Assistant.
 
 The platform is configured through the [QwikSwitch component](/components/qwikswitch/).

source/_components/sensor.radarr.markdown

@@ -15,10 +15,12 @@ ha_release: 0.47
 
 This `radarr` sensor platform pulls data from a given [Radarr](https://radarr.video/) instance.
 
+## {% linkable_title Configuration %}
+
 To use your Radarr sensor in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: radarr
     api_key: YOUR_API_KEY

source/_components/sensor.sht31.markdown

@@ -15,6 +15,8 @@ ha_iot_class: "Local Polling"
 
 The `sht31` sensor platform allows you to get the current temperature and humidity from a Sensirion SHT31 device.
 
+## {% linkable_title Configuration %}
+
 To use your SHT31 sensor in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml

source/_components/sensor.socialblade.markdown

@@ -0,0 +1,37 @@
+---
+layout: page
+title: Social Blade Sensor
+description: "Instructions on how to set up Social Blade Sensor within Home Assistant."
+date: 2018-04-23 08:00
+sidebar: false
+comments: false
+sharing: true
+footer: true
+logo: socialblade.png
+ha_category: Sensor
+ha_release: 0.69
+ha_iot_class: "Cloud Polling"
+---
+
+The `socialblade` sensor component allows you get updates on a youtube channel using your social blade channel id. The sensor gets the subscribers and total views count  from [Social Blade Website]( https://socialblade.com/)
+
+to get the channel id you can go to [Social Blade Website]( https://socialblade.com/) and search for youtube channel by username, then select the channel and grab the id from the url. 
+The channel id will be the last part of the url :
+https://socialblade.com/youtube/channel/{channel_id}
+
+## Example for `configuration.yaml` :
+
+```yaml
+sensor:
+  - platform: socialblade
+    channel_id: YOUR_CHANNEL_NUMBER
+```
+
+{% configuration %}
+channel_id:
+  description: channel id number optained from the URL when you access Social Blade web client. 
+  required: true
+  type: string
+{% endconfiguration %}
+
+All the data will be fetch from  [Social Blade]( https://socialblade.com/). 

source/_components/sensor.sonarr.markdown

@@ -16,10 +16,12 @@ ha_iot_class: "Local Polling"
 
 This `sonarr` sensor platform pulls data from a given [Sonarr](https://sonarr.tv/) instance.
 
+## {% linkable_title Configuration %}
+
 To use your Sonarr sensor in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: sonarr
     api_key: YOUR_API_KEY

source/_components/sensor.synologydsm.markdown

@@ -16,10 +16,12 @@ ha_iot_class: "Local Polling"
 
 The `synologydsm` sensor platform allows getting various statistics from your [Synology NAS](https://www.synology.com).
 
+## {% linkable_title Configuration %}
+
 To use the `synologydsm` sensor in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 sensor:
   - platform: synologydsm
     host: IP_ADDRESS_OF_SYNOLOGY_NAS
@@ -33,7 +35,7 @@ sensor:
 
 Configuration variables:
 
-- **host** (*Required*): The IP address of the Synology NAS to monitor
+- **host** (*Required*): The IP address of the Synology NAS to monitor.
 - **port** (*Optional*): The port number on which the Synology NAS is reachable. Defaults to `5000`.
 - **username** (*Required*): An user to connect to the Synology NAS (a separate account is advised, see the Separate User Configuration section below for details).
 - **password** (*Required*): The password of the user to connect to the Synology NAS.

source/_components/sensor.thethingsnetwork.markdown

@@ -17,6 +17,8 @@ The `thethingsnetwork` sensor platform allows you to get data from a [The Things
 
 This platform requires that the [The Things Network component](/components/thethingsnetwork/) is set up and the [The Things Network Storage Integration](https://www.thethingsnetwork.org/docs/applications/storage/) as well.
 
+## {% linkable_title Prerequisites %}
+
 Visit the [The Things Network Console](https://console.thethingsnetwork.org/) website, log in with your The Things Network credentials, choose your application from **Applications** and go to **Integrations**.
 
 Add a new integration.
@@ -54,6 +56,8 @@ Select **Devices** to get the ID of your device that you want to use.
 Devices overview
 </p>
 
+## {% linkable_title Configuration %}
+
 To enable this platform, add the following lines to your `configuration.yaml`:
 
 ```yaml

source/_components/sensor.uscis.markdown

@@ -7,7 +7,7 @@ sidebar: false
 comments: false
 sharing: true
 footer: true
-logo: uscis.jpg
+logo: uscis.png
 ha_category: Sensor
 ha_release: 0.68
 ha_iot_class: "Cloud Polling"
@@ -31,9 +31,9 @@ friendly_name:
   default: USCIS
   type: string
 case_id:
-  description: Case/receipt number used to get the case details from USCIS web client. 
+  description: Case/receipt number used to get the case details from USCIS web client.
   required: true
   type: string
 {% endconfiguration %}
 
-All the data will be fetch from  [USCIS](https://egov.uscis.gov/casestatus/mycasestatus.do). 
+All the data will be fetch from  [USCIS](https://egov.uscis.gov/casestatus/mycasestatus.do).

source/_components/sensor.waze_travel_time.markdown

@@ -48,4 +48,12 @@ name:
   required: false
   default: "Waze Travel Time"
   type: string
+incl_filter:
+  description: A substring that has to be present in the description of the selected route (a simple case-insensitive matching).
+  required: false
+  type: string
+excl_filter:
+  description: A substring that has to be NOT present in the description of the selected route (a simple case-insensitive matching).
+  required: false
+  type: string
 {% endconfiguration %}

source/_components/snips.markdown

@@ -2,7 +2,7 @@
 layout: page
 title: "Snips"
 description: "Instructions on how to integrate Snips within Home Assistant."
-date: 2017-06-22 12:00
+date: 2018-05-02 12:00
 sidebar: true
 comments: false
 sharing: true
@@ -14,7 +14,7 @@ ha_release: 0.48
 
 The [Snips Voice Platform](https://www.snips.ai) allows users to add powerful voice assistants to their Raspberry Pi devices without compromising on privacy. It runs 100% on-device, and does not require an internet connection. It features Hotword Detection, Automatic Speech Recognition (ASR), Natural Language Understanding (NLU) and Dialog Management.
 
-The latest documentation can be found here: [Snips Platform Documentation](https://github.com/snipsco/snips-platform-documentation/wiki).
+The latest documentation can be found here: [Snips Platform Documentation](https://snips.gitbook.io/documentation/).
 
 ![Snips Modules](/images/screenshots/snips_modules.png)
 
@@ -97,7 +97,7 @@ followed by a command, e.g.
 
 > Set the lights to green in the living room
 
-As the Snips Platform parses this query into an intent, it will be published on MQTT, on the `hermes/intent/<intentName>` topic. The Snips Home Assistant component subscribes to this topic, and handles the intent according to the rules defined in `configuration.yaml`, as explained below.
+As the Snips Platform parses this query into an intent, it will be published on MQTT, on the `hermes/intent/<intentName>` topic. The Snips Home Assistant component subscribes to this topic, and handles the intent according to the rules defined in `configuration.yaml` file, as explained below.
 
 #### {% linkable_title Optional: specifying an external MQTT broker %}
 
@@ -166,11 +166,11 @@ SetTimer:
 ```
 {% endraw %}
 
-### Sending TTS Notifications
+### {% linkable_title Sending TTS Notifications %}
 
 You can send TTS notifications to Snips using the snips.say and snips.say_action services. Say_action starts a session and waits for user response, "Would you like me to close the garage door?", "Yes, close the garage door".
 
-#### {% linkable_title Service `snips/say` %}
+#### {% linkable_title Service `snips.say` %}
 
 | Service data attribute | Optional | Description                                            |
 |------------------------|----------|--------------------------------------------------------|
@@ -178,7 +178,7 @@ You can send TTS notifications to Snips using the snips.say and snips.say_action
 | `site_id`              |      yes | Site to use to start session.                          |
 | `custom_data`          |      yes | custom data that will be included with all messages in this session. |
 
-#### {% linkable_title Service `snips/say_action` %}
+#### {% linkable_title Service `snips.say_action` %}
 
 | Service data attribute | Optional | Description                                            |
 |------------------------|----------|--------------------------------------------------------|
@@ -188,19 +188,48 @@ You can send TTS notifications to Snips using the snips.say and snips.say_action
 | `can_be_enqueued`      |      yes | If True, session waits for an open session to end, if False session is dropped if one is running. |
 | `intent_filter`        |      yes | Array of Strings - A list of intents names to restrict the NLU resolution to on the first query. |
 
-#### Configuration Examples
+
+### {% linkable_title Snips Support %}
+
+There is an active [discord](https://discordapp.com/invite/3939Kqx) channel for further support.
+
+### {% linkable_title Configuration Examples %}
+
+#### {% linkable_title Turn on a light %}
 
 ```yaml
-script:
+intent_script:
   turn_on_light:
-    sequence:
-      service: script.turn_on_light
-      service: snips.say
-        data:
-          text: 'OK, the light is now on'
+    speech:
+      type: plain
+      text: 'OK, closing the garage door'
+    action:
+      service: light.turn_on
+```
 
+##### {% linkable_title Open a Garage Door %}
+
+```yaml
+intent_script:
+  OpenGarageDoor:
+    speech:
+      type: plain
+      text: 'OK, opening the garage door'
+    action:
+      - service: cover.open_cover
+        data:
+          entity_id: garage_door
+```
+
+##### {% linkable_title Intiating a query %}
+
+Here is a more complex example. The automation is triggered if the garage door is open for more than 10 minutes.
+Snips will then ask you if you want to close it and if you respond with something like "Close the garage door" it
+will do so. Unfortunately there is no builtin support for yes and no responses.
+
+```yaml
 automation:
-  query_garage_door:
+  garage_door_has_been_open:
     trigger:
      - platform: state
         entity_id: binary_sensor.my_garage_door_sensor
@@ -224,3 +253,40 @@ intent_script:
     action:
       - service: script.garage_door_close
 ```
+
+##### {% linkable_title Weather %}
+
+So now you can open and close your garage door, let's check the weather. Add the Weather by Snips Skill to your assistant. Create a weather sensor, in this example (Dark Sky)[/components/sensor.darksky/] and the `api_key` in the `secrets.yaml` file.
+
+```yaml
+- platform: darksky
+  name: "Dark Sky Weather"
+  api_key: !secret dark_sky_key
+  update_interval:
+    minutes: 10
+  monitored_conditions:
+    - summary
+    - hourly_summary
+    - temperature
+    - temperature_max
+    - temperature_min
+```
+
+Then create this `intent_script.yaml` file in your configuration directory.
+
+{% raw %}
+```yaml
+intent_script:
+  searchWeatherForecast:
+    speech:
+      type: plain
+      text: >
+        The weather is currently
+        {{ states('sensor.dark_sky_weather_temperature') | round(0) }}
+        degrees outside and {{ states('sensor.dark_sky_weather_summary') }}.
+        The high today will be
+        {{ states('sensor.dark_sky_weather_daily_high_temperature') | round(0)}}
+        and {{ states('sensor.dark_sky_weather_hourly_summary') }}
+```
+{% endraw %}
+

source/_components/switch.eufy.markdown

@@ -1,8 +1,8 @@
 ---
 layout: page
-title: "EufySwitch"
+title: "Eufy Switch"
 description: "Instructions on how to integrate Eufy switches into Home Assistant."
-date: 2018-05-09 19:00
+date: 2018-04-09 19:00
 sidebar: true
 comments: false
 sharing: true

source/_components/switch.fritzdect.markdown

@@ -35,11 +35,21 @@ switch:
     password: YOUR_PASSWORD
 ```
 
-Configuration variables:
-
-- **username** (*Required*): The username for your Fritz!Box.
-- **password** (*Required*): The password for your Fritz!Box.
-- **host** (*Optional*): The IP address/hostname of your Fritz!Box. Defaults to `fritz.box`.
+{% configuration %}
+username:
+  description: The username for your Fritz!Box.
+  required: true
+  type: string
+password:
+  description: The password for your Fritz!Box.
+  required: true
+  type: string
+host:
+  description:  The IP address/hostname of your Fritz!Box.
+  required: false
+  type: string
+  default: fritz.box
+{% endconfiguration %}
 
 It is recommended to create a dedicated user for Home Assistant and only allow access to "Smart Home".
 

source/_components/switch.hive.markdown

@@ -14,10 +14,11 @@ ha_iot_class: "Cloud Polling"
 ---
 
 
-The 'hive' switch component integrates your Hive plugs into Home Assistant, enabling control of your devices.
+The `hive` switch platform integrates your Hive plugs into Home Assistant, enabling control of your devices.
 
-The Hive switch component supports the following Hive products:
-- **Hive Active Plug**
+The platform supports the following Hive products:
+
+- Hive Active Plug
 
 
 <p class='note'>

source/_components/switch.homekit_controller.markdown

@@ -1,7 +1,7 @@
 ---
 layout: page
-title: "HomeKit Light"
-description: "Instructions how to setup HomeKit switches within Home Assistant."
+title: "HomeKit Switch"
+description: "Instructions on how to setup HomeKit switches within Home Assistant."
 date: 2017-03-19 21:08
 sidebar: true
 comments: false

source/_components/switch.mochad.markdown

@@ -14,10 +14,12 @@ ha_release: 0.32
 
 The `mochad` switch platform lets you control an X10 enabled switch device.
 
+## {% linkable_title Configuration %}
+
 To enable this sensor, you first have to set up the [mochad component](/components/mochad/) and then add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 switch:
   - platform: mochad
     devices:
@@ -31,3 +33,5 @@ Configuration variables:
 - **name** (*Optional*): The name of the switch. Default is: x10_switch_dev_*address*.
 - **comm_type** (*Optional*): pl (powerline) or rf (radio frequency). Default is pl.
 
+
+

source/_components/switch.modbus.markdown

@@ -16,10 +16,12 @@ ha_iot_class: "Local Push"
 
 The `modbus` switch platform allows you to control [Modbus](http://www.modbus.org/) coils or registers.
 
+## {% linkable_title Configuration %}
+
 To use your Modbus switches in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 switch:
   platform: modbus
   slave: 1

source/_components/switch.mqtt.markdown

@@ -15,6 +15,8 @@ ha_iot_class: depends
 
 The `mqtt` switch platform lets you control your MQTT enabled switches.
 
+## {% linkable_title Configuration %}
+
 In an ideal scenario, the MQTT device will have a `state_topic` to publish state changes. If these messages are published with a `RETAIN` flag, the MQTT switch will receive an instant state update after subscription, and will start with the correct state. Otherwise, the initial state of the switch will be `false` / `off`.
 
 When a `state_topic` is not available, the switch will work in optimistic mode. In this mode, the switch will immediately change state after every command. Otherwise, the switch will wait for state confirmation from the device (message from `state_topic`).
@@ -24,7 +26,7 @@ Optimistic mode can be forced, even if the `state_topic` is available. Try to en
 To enable this switch in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 switch:
   - platform: mqtt
     command_topic: "home/bedroom/switch1/set"
@@ -106,7 +108,7 @@ In this section you will find some real life examples of how to use this sensor.
 The example below shows a full configuration for a switch.
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 switch:
   - platform: mqtt
     name: "Bedroom Switch"
@@ -140,7 +142,7 @@ The configuration will look like the example below:
 
 {% raw %}
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 switch:
   - platform: mqtt
     name: bathroom

source/_components/switch.pilight.markdown

@@ -19,6 +19,8 @@ Additionally, RF commands can be defined that trigger this switch to turn on and
 
 To be really sure that Home Assistant knows the actual state of your device it is recommended to use the RF remote with codes unknown to any of your 433 MHz devices. Thus you use the remote to trigger this switch to send the correct RF code to the device.
 
+## {% linkable_title Configuration %}
+
 To define a Pilight switch, add the following lines to your `configuration.yaml`:
 
 ```yaml

source/_components/switch.rainbird.markdown

@@ -15,6 +15,8 @@ ha_iot_class: "Local Polling"
 
 This `rainbird` switch platform allows interacting with [LNK WiFi](http://www.rainbird.com/landscape/products/controllers/LNK-WiFi.htm) module of the Rain Bird Irrigation system in Home Assistant.
 
+## {% linkable_title Configuration %}
+
 Once you have enabled the [Rain Bird component](/components/rainbird), add the following to your `configuration.yaml` file:
 
 ```yaml

source/_components/switch.rainmachine.markdown

@@ -13,84 +13,24 @@ ha_iot_class: "Cloud Polling"
 ha_release: 0.51
 ---
 
-The `rainmachine` switch platform allows you to control programs and zones within a [RainMachine smart Wi-Fi sprinkler controller](http://www.rainmachine.com/).
-
-## {% linkable_title Configuring the Platform %}
-
-The platform allows for either local (i.e., directly across the LAN) or remote (i.e., through RainMachine's cloud API) access; the route you choose will dictate what your configuration should look like.
-
-For local access, specify the IP address/hostname of your RainMachine unit, your RainMachine password, and optionally, the device's HTTP port:
-
-```yaml
-switch:
-  platform: rainmachine
-  ip_address: 192.168.1.100
-  password: YOUR_PASSWORD
-```
-
-For remote access, specify your RainMachine username/email and password:
-
-```yaml
-switch:
-  platform: rainmachine
-  email: user@host.com
-  password: YOUR_PASSWORD
-```
-
-{% configuration %}
-password:
-  description: Your RainMachine password.
-  required: true
-  type: string
-email:
-  description: "Your RainMachine username/email. Cannot be used with the `ip_address` parameter."
-  required: false
-  type: string
-ip_address:
-  description: "The IP address of your RainMachine unit; cannot be used with the `email` parameter."
-  required: optional
-  type: string
-port:
-  description: The TCP port used by your unit for the REST API.
-  required: false
-  type: int
-  default: 8080
-ssl:
-  description: Whether communication with the local device should occur over HTTPS.
-  required: false
-  type: boolean
-  default: true
-zone_run_time:
-  description: The number of seconds that a zone should run when turned on.
-  required: false
-  type: int
-  default: 600
-{% endconfiguration %}
+The `rainmachine` switch platform allows you to control programs and zones
+within a [RainMachine smart Wi-Fi sprinkler controller](http://www.rainmachine.com/). 
 
+<p class='note'>
+You must have the [RainMachine component](https://www.home-assistant.io/components/rainmachine/)
+configured to use this switch. After configuring that component, switches will
+automatically appear.
+</p>
 
 ## {% linkable_title Controlling Your Device %}
 
-After Home Assistant loads, you will see new switches for every enabled program and zone. These work as expected:
+After Home Assistant loads, new switches will be added for every enabled
+program and zone. These work as expected:
 
 - Program On/Off: starts/stops a program
-- Zone On/Off: starts/stops a zone (using the `zone_run_time` parameter to determine how long to run for)
+- Zone On/Off: starts/stops a zone (using the `zone_run_time` parameter to
+determine how long to run for)
 
-Programs and zones are linked. If a program is running its final zone, you will see both the program and zone switches turned on; turning either one off will turn the other one off (just like in the web app).
-
-## {% linkable_title Weblink %}
-
-If you would like to see and control more detailed information, create an [iFrame](/components/panel_iframe/) that renders the RainMachine web app:
-
-```yaml
-panel_iframe:
-  rainmachine:
-    title: RainMachine
-    url: "https://my.rainmachine.com/s/<YOUR_DEVICE_ID>/ui/"
-    icon: mdi:water-pump
-```
-
-You can find `<YOUR_DEVICE_ID>` by logging into [https://my.rainmachine.com](https://my.rainmachine.com ) and taking note of the URL.
-
-## {% linkable_title For Awareness %}
-
-The remote RainMachine API currently has two broken operations (i.e., they return error codes): starting a program and stopping a program. Please note that starting/stopping programs with the remote API is disabled until RainMachine can fix the issue.
+Programs and zones are linked. While a program is running, you will see both
+the program and zone switches turned on; turning either one off will turn the
+other one off (just like in the web app).

source/_components/switch.rest.markdown

@@ -15,6 +15,8 @@ ha_iot_class: "Local Polling"
 
 The `rest` switch platform allows you to control a given endpoint that supports a [RESTful API](https://en.wikipedia.org/wiki/Representational_state_transfer). The switch can get the state via GET and set the state via POST on a given REST resource.
 
+## {% linkable_title Configuration %}
+
 To enable this switch, add the following lines to your `configuration.yaml` file:
 
 ```yaml
@@ -93,7 +95,7 @@ switch:
     resource: http://IP_ADDRESS/led_endpoint
     body_on: '{"active": "true"}'
     body_off: '{"active": "false"}'
-    is_on_template: '{{value_json.is_active}}'
+    is_on_template: '{{ value_json.is_active }}'
     headers:
       Content-Type: application/json
 ```

source/_components/switch.wake_on_lan.markdown

@@ -15,6 +15,8 @@ ha_iot_class: "Local Polling"
 
 The `wake_on_lan` (WOL) switch platform allows you to turn on a [WOL](https://en.wikipedia.org/wiki/Wake-on-LAN) enabled computer.
 
+## {% linkable_title Configuration %}
+
 <p class='note warning'>
 The WOL switch can only turn on your computer and monitor the state. There is no universal way to turn off a computer remotely. The `turn_off` variable is there to help you call a script when you have figured out how to remotely turn off your computer.
 See below for suggestions on how to do this.
@@ -23,7 +25,7 @@ See below for suggestions on how to do this.
 To enable this switch in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
-# Example configuration.yml entry
+# Example configuration.yaml entry
 switch:
   - platform: wake_on_lan
     mac_address: "00-01-02-03-04-05"
@@ -42,7 +44,8 @@ Configuration variables:
 Here are some real life examples of how to use the **turn_off** variable.
 
 ### {% linkable_title Suspending Linux %}
-Suggested recipe for letting the turn_off script suspend a Linux computer (the **target**)
+
+Suggested recipe for letting the `turn_off` script suspend a Linux computer (the **target**)
 from Home Assistant running on another Linux computer (the **server**).
 
 1. On the **server**, log in as the user account Home Assistant is running under. (I'm using `hass` in this example)

source/_components/timer.markdown

@@ -107,30 +107,29 @@ timer:
 
 ```yaml
 # Example automations.yaml entry
-- action:
-  - service: timer.start
-    entity_id: timer.test
-  alias: Timerswitch
+- alias: Timerswitch
   id: 'Timerstart'
-
-# Timer is started when the switch pumprun is set to on. 
+  # Timer is started when the switch pumprun is set to on. 
   trigger: 
-    platform: state
+  - platform: state
     entity_id: switch.pumprun
     to: 'on'
+  action:
+  - service: timer.start
+    entity_id: timer.test
 
 # When timer is stopped, the time run out, another message is sent
-- action:
-  - service: notify.nma
-    data:
-      message: "Timer stop"
-  alias: Timerstop
+- alias: Timerstop
   id: 'Timerstop'
   trigger: 
-    platform: event
+  - platform: event
     event_type: timer.finished
     event_data: 
       entity_id: timer.test
+  action:
+  - service: notify.nma
+    data:
+      message: "Timer stop"
 ```
 
 ### {% linkable_title Control a timer from the frontend %}

source/_components/tts.amazon_polly.markdown

@@ -15,6 +15,8 @@ ha_release: 0.37
 The `amazon_polly` text-to-speech platform that works with [Amazon Polly](https://aws.amazon.com/polly/) to create the spoken output.
 Polly is a paid service via Amazon Web Services.  There is a [free tier](https://aws.amazon.com/polly/pricing/) for the first 12 months and then a charge per million characters afterwards.
 
+## {% linkable_title Configuration %}
+
 To get started, add the following lines to your `configuration.yaml` (example for Amazon Polly):
 
 ```yaml
@@ -23,33 +25,62 @@ tts:
   - platform: amazon_polly
     aws_access_key_id: AWS_ACCESS_KEY_ID
     aws_secret_access_key: AWS_SECRET_ACCESS_KEY
-    profile_name: AWS_PROFILE
-    region_name: 'us-east-1'
-    voice: Joanna
 ```
 
-Configuration variables:
+{% configuration %}
+aws_access_key_id:
+  description: "Your AWS Access Key ID. For more information, please read the [AWS General Reference regarding Security Credentials](http://docs.aws.amazon.com/general/latest/gr/aws-security-credentials.html). If provided, you must also provide an `aws_secret_access_key` and must **not** provide a `profile_name`."
+  required: true
+  type: string
+aws_secret_access_key:
+  description: "Your AWS Secret Access Key. For more information, please read the [AWS General Reference regarding Security Credentials](http://docs.aws.amazon.com/general/latest/gr/aws-security-credentials.html). If provided, you must also provide an `aws_access_key_id` and must **not** provide a `profile_name`."
+  required: true
+  type: string
+profile_name:
+  description: A credentials profile name. For more information, please see the [boto3 Documentation](http://boto3.readthedocs.io/en/latest/guide/configuration.html#shared-credentials-file) for more information.
+  required: false
+  type: string
+region_name:
+  description: "The region identifier to connect to. The default is `us-east-1`. See the [AWS Regions and Endpoints Reference](https://docs.aws.amazon.com/general/latest/gr/rande.html#pol_region) for available regions."
+  required: false
+  type: string or list
+name:
+  description: "Setting the optional parameter `name` allows multiple notifiers to be created. The default value is `notify`. The notifier will bind to the service `notify.NOTIFIER_NAME`."
+  required: false
+  type: string
+text_type:
+  description: "Specify wherever to use text (default) or ssml markup by default."
+  required: false
+  type: string
+  default: text
+voice:
+  description: "Voice name to be used. See the [Amazon Documentation](http://docs.aws.amazon.com/polly/latest/dg/voicelist.html) for available voices."
+  required: false
+  type: string
+output_format:
+  description: "Override the default output format, e.g., `mp3`, `ogg_vorbis` or `pcm`."
+  required: false
+  type: string
+  default: mp3
+sample_rate:
+  description: "Override the default sample rate, defaults to 22050 for MP3 and Ogg Vorbis, 16000 for pcm."
+  required: false
+  type: string
+{% endconfiguration %}
 
-| Parameter           | Value | Description |
-|---------------------|----------|-------------|
-| `aws_access_key_id` | Required |  Your AWS Access Key ID. For more information, please read the [AWS General Reference regarding Security Credentials](http://docs.aws.amazon.com/general/latest/gr/aws-security-credentials.html). If provided, you must also provide an `aws_secret_access_key` and must **not** provide a `profile_name` |
-| `aws_secret_access_key` | Required | Your AWS Secret Access Key. For more information, please read the [AWS General Reference regarding Security Credentials](http://docs.aws.amazon.com/general/latest/gr/aws-security-credentials.html). If provided, you must also provide an `aws_access_key_id` and must **not** provide a `profile_name`. |
-| `profile_name` | Optional | A credentials profile name. For more information, please see the [boto3 Documentation](http://boto3.readthedocs.io/en/latest/guide/configuration.html#shared-credentials-file) for more information. |
-| `region_name` | Optional | The region identifier to connect to. The default is `us-east-1`. |
-| `name` | Optional | Setting the optional parameter `name` allows multiple notifiers to be created. The default value is `notify`. The notifier will bind to the service `notify.NOTIFIER_NAME`. |
-| `text_type` | text/ssml    | text or ssml: Specify wherever to use text (default) or ssml markup by default. |
-| `voice` | Optional | Voice name to be used. See the [Amazon Documentation](http://docs.aws.amazon.com/polly/latest/dg/voicelist.html) for available voices. |
-| `output_format` | mp3/ogg_vorbis/pcm | Override the default output format, defaults to MP3. |
-| `sample_rate` | 8000/16000/22050 | Override the default sample rate, defaults to 22050 for MP3 and Ogg Vorbis, 16000 for pcm. |
  
-## Usage
+## {% linkable_title Usage %}
+
 Say to all `media_player` device entities:
+
 ```yaml
 - service: tts.amazon_polly_say
   data_template:
     message: '<speak>Hello from Amazon Polly</speak>'
 ```
+
 or
+
 ```yaml
 - service: tts.amazon_polly_say
   data_template:

source/_components/vacuum.xiaomi_miio.markdown

@@ -127,7 +127,7 @@ The following table shows the units of measurement for each attribute:
 <p class='note'>
 As per [python-miio issue 185](https://github.com/rytilahti/python-miio/issues/185) the Mi-Home app no longer stores the token within the database (it's retrieved from Xiaomi servers from version 5.0.31+). Currently the only known fix is to uninstall, then install a downgraded version of the apk. Apkmirror is a trusted source for older versions of the app. [Mi-Home version 5.0.0](https://www.apkmirror.com/apk/xiaomi-inc/mihome/mihome-5-0-0-release/) is confirmed as working for the following Android methods.
 
-This token (32 hexadecimal characters) is required for the Xiaomi Mi Robot Vacuum, Xiaomi Philips Lights and Xiaomi IR Remote. The Xiaomi Gateway uses another security method and requires a `key` (16 alphanumeric chars), which can be obtained
+This token (32 hexadecimal characters) is required for the Xiaomi Mi Robot Vacuum, Mi Robot 2 (Roborock) Vacuum, Xiaomi Philips Lights and Xiaomi IR Remote. The Xiaomi Gateway uses another security method and requires a `key` (16 alphanumeric chars), which can be obtained
 easily via a hidden menu item at the Mi-Home app or using the `miio` command line tool.
 </p>
 
@@ -203,7 +203,7 @@ To fetch the token follow these instructions depending on your mobile phone plat
 6. Download the 'ADB Backup Extractor' from [here](https://sourceforge.net/projects/adbextractor/files/latest/download)
 7. Extract the data from the backup: `java -jar Android\ Backup\ Utilities/Android\ Backup\ Extractor/android-backup-extractor-20171005-bin/abe.jar unpack backup.ab unpacked.tar` (enter the password, if prompted)
 8. Untar the unpacked data: `tar -xvf unpacked.tar`
-9. `sqlite3 apps/com.xiaomi.smarthome/db/miio2.db 'select token from devicerecord where name = "Mi Robot Vacuum";'` returns the token for your Xiaomi vacuum bot.
+9. `sqlite3 apps/com.xiaomi.smarthome/db/miio2.db 'select token from devicerecord where name like "%Vacuum%";'` returns the token for your Xiaomi vacuum bot.
 
 
 #### {% linkable_title Linux and Android (rooted!) %}
@@ -245,7 +245,7 @@ To fetch the token follow these instructions depending on your mobile phone plat
 8. Install [DB Browser for SQLite](http://sqlitebrowser.org/).
 9. Open DB Browser and load the `.sqlite` file you saved from your backup.
 10. Click on the `Execute SQL` tab.
-11. Input and run this query: `SELECT ZTOKEN FROM ZDEVICE WHERE ZNAME = "Mi Robot Vacuum"`
+11. Input and run this query: `SELECT ZTOKEN FROM ZDEVICE WHERE ZNAME LIKE "%Vacuum%"`
 12. Copy the returned 32-digit hexadecimal string to your clipboard.
 13. Open `Terminal` and execute this command: `echo '0: <YOUR HEXADECIMAL STRING>' | xxd -r -p | openssl enc -d -aes-128-ecb -nopad -nosalt -K 00000000000000000000000000000000`
 14. Use the resulting string as your token.

source/_cookbook/automation_flashing_lights.markdown

@@ -97,6 +97,14 @@ script:
         service: homeassistant.turn_off
         data:
           entity_id: switch.REL1
+      - alias: loop_room1
+        service: script.turn_on
+        data:
+          entity_id: script.flash_loop
+
+  flash_loop:
+    alias: Flash loop
+    sequence:
       - delay:
           # time for flash light off
           seconds: 1

source/_cookbook/configuration_yaml_by_apocrathia.markdown

@@ -0,0 +1,12 @@
+---
+layout: page
+title: "Configuration.yaml by Apocrathia"
+description: ""
+date: 2018-05-02 12:40
+sidebar: true
+comments: false
+sharing: true
+footer: true
+ha_category: Example configuration.yaml
+ha_external_link: https://github.com/Apocrathia/home-assistant-config/
+---

source/_docs/configuration/templating.markdown

@@ -140,7 +140,7 @@ With strings
 
 ```text
 {% raw %}{% set tracker_name = "paulus"%}
- 
+
 {% if states("device_tracker." + tracker_name) != "unknown" %}
   {{ state_attr("device_tracker." + tracker_name, "battery")}}
 {% else %}

source/_docs/configuration/yaml.markdown

@@ -93,3 +93,15 @@ lights: !include lights.yaml
 ```
 
 More information about this feature can also be found at [splitting configuration](/docs/configuration/splitting_configuration/).
+
+## {% linkable_title Common Issues %}
+
+### {% linkable_title found character '\t' %}
+
+If you see the following message:
+
+```
+found character '\t' that cannot start any token
+```
+
+This means that you've mistakenly entered a tab character, instead of spaces. 

source/_docs/ecosystem/certificates/tls_self_signed_certificate.markdown

@@ -11,7 +11,7 @@ redirect_from: /cookbook/tls_self_signed_certificate/
 ---
 
 If your Home Assistant instance is only accessible from your local network you can still protect the communication between your browsers and the frontend with SSL/TLS. 
-[Let's encrypt]({{site_root}}/blog/2015/12/13/setup-encryption-using-lets-encrypt/) will only work if you have a DNS entry and remote access is allowed. 
+[Let's encrypt]({{site_root}}/blog/2017/09/27/effortless-encryption-with-lets-encrypt-and-duckdns/) will only work if you have a DNS entry and remote access is allowed. 
 The solution is to use a self-signed certificate. As you most likely don't have a certification authority (CA) your browser will complain about the security. If you have a CA then this will not be an issue.
 
 To create a certificate locally, you need the [OpenSSL](https://www.openssl.org/) command-line tool.

source/_docs/installation/docker.markdown

@@ -18,6 +18,15 @@ Installation with Docker is straightforward. Adjust the following command so tha
 $ docker run -d --name="home-assistant" -v /path/to/your/config:/config -v /etc/localtime:/etc/localtime:ro --net=host homeassistant/home-assistant
 ```
 
+### {% linkable_title Raspberry Pi 3 (Raspbian) %}
+
+```bash
+$ docker run -d --name="home-assistant" -v /path/to/your/config:/config -v /etc/localtime:/etc/localtime:ro --net=host homeassistant/raspberrypi3-homeassistant:0.XX.x
+```
+
+The Docker container for Raspberry Pi 3 does not have a 'latest' tag so the version number must be specified explicitly, i.e. 0.68.0. This goes for both CLI and Docker Compose.
+
+
 ### {% linkable_title macOS %}
 
 When using `docker-ce` (or `boot2docker`) on macOS, you are unable to map the local timezone to your Docker container ([Docker issue](https://github.com/docker/for-mac/issues/44)). Instead of `-v /etc/localtime:/etc/localtime:ro`, just pass in the timezone environment variable when you launch the container, e.g, `-e "TZ=America/Los_Angeles"`. Replace "America/Los_Angeles" with [your timezone](http://en.wikipedia.org/wiki/List_of_tz_database_time_zones).

source/_docs/mqtt/discovery.markdown

@@ -56,7 +56,7 @@ The `<node_id>` level can be used by clients to only subscribe to their own (com
 The following firmware for ESP8266, ESP32 and Sonoff unit has built-in support for MQTT discovery:
 
 - [Sonoff-Tasmota](https://github.com/arendst/Sonoff-Tasmota) (starting with 5.11.1e)
-- [esphomelib](https://github.com/OttoWinter/esphomelib)
+- [esphomeyaml](https://esphomelib.com/esphomeyaml/index.html)
 - [ESPurna](https://github.com/xoseperez/espurna)
 - [Arilux AL-LC0X LED controllers](https://github.com/mertenats/Arilux_AL-LC0X)