31 lines
1 KiB
Markdown
31 lines
1 KiB
Markdown
---
|
|
layout: page
|
|
title: "FRITZ!Box"
|
|
description: "Instructions how to integrate a phone call monitor for AVM FRITZ!Box routers into Home Assistant."
|
|
date: 2016-08-13 15:00
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: avm.png
|
|
ha_category: System Monitor
|
|
ha_release: "0.27"
|
|
---
|
|
|
|
|
|
The `fritzbox_callmonitor` sensor monitors the call monitor exposed by [AVM Fritz!Box](http://avm.de/produkte/fritzbox/) routers
|
|
on TCP port 1012. It will assume the values 'idle', 'ringing', 'dialing', or 'talking',
|
|
with the phone numbers involved contained in the state attributes.
|
|
|
|
To use the Fritz!Box call monitor in your installation, add the following to your `configuration.yaml` file:
|
|
|
|
```yaml
|
|
# Example configuration.yaml entry
|
|
sensor:
|
|
platform: fritzbox_callmonitor
|
|
```
|
|
|
|
Configuration variables:
|
|
|
|
- **host** (*Optional*): The IP address of your router, eg. 192.168.1.1. It is optional since every fritzbox is also reachable by using the IP address 169.254.1.1.
|
|
- **port** (*Optional*): The TCP port of the call monitor. There is usually no reason to change this.
|