53 lines
1.9 KiB
Markdown
53 lines
1.9 KiB
Markdown
---
|
|
layout: page
|
|
title: "Raspberry Pi Garage door"
|
|
description: "Instructions how to setup the Raspberry Pi garage doors within Home Assistant."
|
|
date: 2016-02-12 07:00
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: raspberry-pi.png
|
|
ha_category: Deprecated
|
|
ha_release: 0.23
|
|
---
|
|
|
|
<p class='note warning'>
|
|
**This platform has been deprecated in favor of a "[cover](/components/cover.rpi_gpio/)" platform and will be removed in the future. Please use the cover platform.**
|
|
</p>
|
|
|
|
The `rpi_gpio` garage door platform allows you to use a Raspberry Pi to control your Garage door.
|
|
|
|
It uses two pins on the Raspberry Pi.
|
|
|
|
- The `state_pin` will detect if the door is closed, and
|
|
- the `relay_pin` will trigger the door to open or close.
|
|
|
|
Although you do not need Andrews Hilliday's software controller when you run Home Assistant, he has written clear instructions on how to hook your garage door & sensors up to your Raspberry Pi, which can be found [here](https://github.com/andrewshilliday/garage-door-controller#hardware-setup).
|
|
|
|
To enable Raspberry Pi Garage doors in your installation, add the following to your `configuration.yaml` file:
|
|
|
|
```yaml
|
|
# Example configuration.yaml entry
|
|
garage_door:
|
|
platform: rpi_gpio
|
|
state_pull_mode: DOWN
|
|
relay_time: 1
|
|
doors:
|
|
- relay_pin: 10
|
|
state_pin: 11
|
|
name: 'Left door'
|
|
- relay_pin: 12
|
|
state_pin: 13
|
|
name: 'Right door'
|
|
```
|
|
|
|
Configuration variables:
|
|
|
|
- **doors** array (*Required*): List of your doors.
|
|
- **name** (*Optional*): Name to use in the Frontend.
|
|
- **relay_pin** (*Required*): The pin of your Raspberry Pi where the relay is connected.
|
|
- **state_pin** (*Required*): The pin of your Raspberry Pi to retrieve the state.
|
|
- **state_pull_mode** (*Optional*): The direction the State pin is pulling. It can be UP or DOWN. Default is UP.
|
|
- **relay_time** (*Optional*): The time that the relay will be on for in seconds. Default is .2 seconds.
|
|
|