1f40fdb09d
* Initial snmp sensor docs (#538) * Fixed markdown and added logo (#551) * Added documentation for router operating mode for asuswrt (#545) * local_file camera component documenatation (#554) * Documenation for local_file camera component * Update camera.local_file.markdown * Added information about voltage sensor * Instructions for Pandora media player (#552) * Add release * Add pub_key * Add BT Home Hub docs * Markdown tweaks (#553) * Add docs about MySensors IR switch (#556) * Update sensor.mysensors docs, about moving V_IR_SEND type to switch platform. * Update switch.mysensors docs. Add section about the new service and additional example sketch for the IR switch device. * Update index.html * plex sensor (#526) * Add var descriptions * Adds documentation for the Local File Camera (#482) * Revert "Adds documentation for the Local File Camera" (#563) * Minor changes * Add Wink Rollershutter (#559) * Added example of using template in shell_command. (#547) * Add Documentation for Netatmo Welcome (#542) * Reorganize documentation for Netatmo As Netatmo is now a Hub component, documentations has been splitted in several parts betweent the hub, the sensors and the camera Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com> * Add configuration variables for Netatmo Welcome cameras * Add ha_release information on new documentation pages * Netatmo Weather Station is a weather sensor * Add blog post 0.22
31 lines
922 B
Markdown
31 lines
922 B
Markdown
---
|
|
layout: page
|
|
title: "RFXtrx"
|
|
description: "Instructions how to integrate RFXtrx into Home Assistant."
|
|
date: 2015-10-08 10:15
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: rfxtrx.png
|
|
ha_category: Hub
|
|
ha_release: pre 0.7
|
|
---
|
|
|
|
The `rfxtrx` component supports RFXtrx devices by [RFXCOM](http://www.rfxcom.com) which communicate in the frequency range of 433.92 MHz.
|
|
|
|
To enable RFXtrx in your installation, add the following to your `configuration.yaml` file:
|
|
|
|
```yaml
|
|
# Example configuration.yaml entry
|
|
rfxtrx:
|
|
device: PATH_TO_DEVICE
|
|
debug: True
|
|
dummy: False
|
|
```
|
|
|
|
Configuration variables:
|
|
|
|
- **device** (*Required*): The path to your device, e.g. `/dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1Y0NJGR-if00-port0`
|
|
- **debug** (*Optional*): If you want to receive debug output.
|
|
- **dummy** (*Optional*): Then you have need a connected drive to test your settings. Can be usefull for debugging and testing.
|