44 lines
2.1 KiB
Markdown
44 lines
2.1 KiB
Markdown
---
|
|
layout: page
|
|
title: "Raspberry Pi All-In-One Installer"
|
|
date: 2016-05-12 01:39
|
|
comments: true
|
|
sharing: true
|
|
footer: true
|
|
---
|
|
|
|
The "[Raspberry Pi All-In-One Installer](https://github.com/jbags81/fabric-home-assistant)" deploy a complete Home Assistant server including support for MQTT with websocket support and Z-Wave using [Fabric](http://www.fabfile.org/).
|
|
|
|
Requirements before installation:
|
|
|
|
* You have a Raspberry Pi with a fresh installation of [Raspbian Jessie/Jessie Lite](https://www.raspberrypi.org/downloads/raspbian/) or Debian 8 connected to your network.
|
|
* You are able to SSH into your Raspberry Pi.
|
|
* You have a computer with Python 3 and `git` installed.
|
|
|
|
Installation instructions (all from your PC):
|
|
|
|
1. Install fabric: `pip3 install fabric3`
|
|
2. Clone the repository: `git clone https://github.com/jbags81/fabric-home-assistant.git`
|
|
3. Change the directory: `cd fabric-home-assistant`
|
|
4. Edit the `fabfile.py` file and add the hostname or the IP address of your Raspberry Pi to `env.hosts`. If you are using Debian 8 then replace the username `pi` in the `fabfile.py` file with your Debian user as well.
|
|
5. Build your new Home Assistant server: `fab deploy`
|
|
6. Reboot your Raspberry Pi.
|
|
|
|
Once rebooted, your Raspberry Pi will be up and running with Home Assistant. You can access it at **http://your_raspberry_pi_ip:8123**.
|
|
|
|
The Home Assistant configuration is located at `/home/hass`. The virtualenv with the Home Assistant installation is located at `/srv/hass/hass_venv`.
|
|
|
|
The All-In-One Fabric script will do the following automatically:
|
|
|
|
* Create all needed directories
|
|
* Create needed service accounts
|
|
* Install OS and Python dependencies
|
|
* Setup a virtualenv to run Home Assistant and components inside.
|
|
* Run as a service account
|
|
* Install Home Assistant in a virtualenv
|
|
* Build and install Mosquitto from source with websocket support
|
|
* Build and Install Python-openzwave in the Home Assistant virtualenv
|
|
* Add both Home Assistant and Mosquitto to systemd services to start at boot
|
|
|
|
Fabric allows any of the underlying functions to be ran individually as well. Run `fab -l` to see a list of all callable jobs.
|
|
|