48 lines
2.1 KiB
Markdown
48 lines
2.1 KiB
Markdown
---
|
|
layout: page
|
|
title: "Netgear"
|
|
description: "Instructions on how to integrate Netgear routers into Home Assistant."
|
|
date: 2015-03-23 19:59
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: netgear.png
|
|
ha_category: Presence Detection
|
|
ha_iot_class: "Local Polling"
|
|
ha_release: pre 0.7
|
|
---
|
|
|
|
This platform allows you to detect presence by looking at connected devices to a [Netgear](http://www.netgear.com/) device.
|
|
|
|
To use this device tracker in your installation, add the following to your `configuration.yaml` file:
|
|
|
|
```yaml
|
|
# Example configuration.yaml entry
|
|
device_tracker:
|
|
- platform: netgear
|
|
host: YOUR_ROUTER_IP
|
|
username: YOUR_ADMIN_USERNAME
|
|
password: YOUR_ADMIN_PASSWORD
|
|
```
|
|
|
|
Configuration variables:
|
|
|
|
- **url** (*Optional*): The base URL, e.g., `http://routerlogin.com:5000` for example. If not provided `host` and `port` are used. If none provided autodetection of the URL will be used.
|
|
- **host** (*Optional*): The IP address of your router, e.g., `192.168.1.1`.
|
|
- **port** (*Optional*): The port your router communicates with.
|
|
- **username** (*Optional*): The username of a user with administrative privileges. If not provided `admin` will be used.
|
|
- **password** (*Required*): The password for your given admin account.
|
|
- **devices** (*Optional*): If provided only specified devices will be reported. Can be MAC address or the device name as reported in the Netgear UI.
|
|
- **exclude** (*Optional*): Devices to exclude from the scan.
|
|
- **accesspoints** (*Optional*): Also track devices on the specified APs. Only supports MAC address.
|
|
|
|
When `accesspoints` is specified an extra device will be reported for each device connected to the APs specified here, as `MY-LAPTOP on RBS40`. `Router` will be reported as AP name for the main AP. Only tested with Orbi.
|
|
|
|
The use of `devices` or `exclude` is recommended when using `accesspoints` to avoid having a lot of entries.
|
|
|
|
List of models that are known to use port 80:
|
|
- Nighthawk X4S - AC2600 (R7800)
|
|
- Orbi
|
|
|
|
See the [device tracker component page](/components/device_tracker/) for instructions how to configure the people to be tracked.
|