jeena/home-assistant.github.io
1
0
Fork 0
Code Issues Pull requests Projects Packages Wiki Activity Actions
home-assistant.github.io/source/_components/sensor.netatmo.markdown
Paulus Schoutsen 1f40fdb09d 0.22 (#570) 
* Initial snmp sensor docs (#538)

* Fixed markdown and added logo (#551)

* Added documentation for router operating mode for asuswrt (#545)

* local_file camera component documenatation (#554)

* Documenation for local_file camera component

* Update camera.local_file.markdown

* Added information about voltage sensor

* Instructions for Pandora media player (#552)

* Add release

* Add pub_key

* Add BT Home Hub docs

* Markdown tweaks (#553)

* Add docs about MySensors IR switch (#556)

* Update sensor.mysensors docs, about moving V_IR_SEND type to switch
  platform.
* Update switch.mysensors docs. Add section about the new service and
  additional example sketch for the IR switch device.

* Update index.html

* plex sensor (#526)

* Add var descriptions

* Adds documentation for the Local File Camera (#482)

* Revert "Adds documentation for the Local File Camera" (#563)

* Minor changes

* Add Wink Rollershutter (#559)

* Added example of using template in shell_command. (#547)

* Add Documentation for Netatmo Welcome (#542)

* Reorganize  documentation for Netatmo

As Netatmo is now a Hub component, documentations has been splitted in several
parts betweent the hub, the sensors and the camera

Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>

* Add configuration variables for Netatmo Welcome cameras

* Add ha_release information on new documentation pages

* Netatmo Weather Station is a weather sensor

* Add blog post 0.22
2016-06-18 13:24:52 -07:00

2 KiB
Raw Blame History

layout title description date sidebar comments sharing footer logo ha_category
page Netatmo Sensor Instructions how to integrate Netatmo sensors into Home Assistant. 2016-06-02 08:10 true false true true netatmo.png Weather

The netatmo sensor platform is consuming the information provided by a Netatmo device.

To enable the Netatmo sensor, add the following lines to your configuration.yaml:

# Example configuration.yaml entry
sensor:
  platform: netatmo
  station: STATION_NAME
  modules:
    module_name1:
      - temperature
      - humidity
      - noise
      - pressure
      - co2
      - rain
      - sum_rain_1
      - sum_rain_24
    module_name2:
      - temperature
    rainmeter_name3:
      - rain
      - sum_rain_1
      - sum_rain_24

Configuration variables:

  • station (Optionnal): The name of the weather station. Needed if several stations are associated with the account.
  • modules (Required): Modules to use. Multiple entries allowed.
    • module_name array (Required): Name of the module.
      • temperature: Current temperature.
      • co2: CO2 concentration in ppm.
      • pressure: Pressure in mbar.
      • noise: Noise level in dB.
      • humidity: Humidity in %.
      • rain: Estimated rainfall for today in mm.
      • sum_rain_1: Rainfall in the last hour in mm.
      • sum_rain_24: Rainfall in mm from 00:00am - 23:59pm.

{% linkable_title Find your modules name %}

You can find your modules name in your online NetAtmo account. These names can be found and changed in parameters (See screenshot) You have to provide these name in your Home Assistant configuration file.

The Home Assistant NetAtmo platform has only be tested with the classic indoor, outdoor module and rainmeter. There is no support for the windmeter module at this time because developers does not own these modules.