5ae3d4b93d
Docs from prior work when I didn’t know what I was doing with git, branches or open source contributions. There are still changes to be made on the code side and this will doubtless be updated.
2 KiB
Executable file
2 KiB
Executable file
| layout | title | description | date | sidebar | comments | sharing | footer | logo | ha_category | ha_release |
|---|---|---|---|---|---|---|---|---|---|---|
| page | Digital Loggers Switch | Instructions how to integrate Digital Loggers DIN III relays into Home Assistant. | 2016-10-02 10:00 | true | false | true | true | digitalloggers.png | Switch | 0.35 |
The digitalloggers switch platform allows you to control the state of your Digital Loggers switches.
To use your digitalloggers switch in your installation, add the following to your configuration.yaml file:
# Example configuration.yaml entry
switch:
- platform: digitalloggers
host: 192.168.1.43
password: SuperSecret123!!
name: FantasticRelayDevice
Configuration variables:
- host (Required): The IP address or FQDN of your DIN III relay, eg.
192.168.1.32ormyrelay.example.com. - name (Optional): The name to use when controlling this relay. Default:
DINRelay. - username (Optional): Credentials for controlling this relay. Default:
admin. - password (Optional): Credentials for controlling this relay. Default:
admin. - timeout (Optional): Default timeout as set by the underlying python-dlipower library is
20seconds. Override it if you need to. Valid range is 1 to 600. - cycletime (Optional): This is the delay enforced by the library when you send multiple commands to the same device. The default relay cycle time is
2seconds. Override it if you need to. Valid range is 1 to 600. A delay is a recommendation of Digital Loggers:
Many loads draw more power when they are initially switched on. Sequencing prevents circuit overloads when loads devices are attached to a single circuit.
Your relays will be available in the form switch.fantasticrelaydevice_individualrelayname
Note: There is currently a limitation of the dlipower library used by the digitalloggers component that communication is only available over port 80.