32 lines
1.1 KiB
Markdown
32 lines
1.1 KiB
Markdown
---
|
|
layout: page
|
|
title: "KNX"
|
|
description: "Instructions on how to integrate KXN components with Home Assistant."
|
|
date: 2016-06-08 12:00
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: knx.png
|
|
ha_category: DIY
|
|
ha_release: 0.24
|
|
---
|
|
|
|
[KNX/EIB](http://www.knx.org) integration for Home Assistant allows you to connect to a KNX bus. The component requires a local KNX/IP interface like the [Weinzierl 730](http://www.weinzierl.de/index.php/en/all-knx/knx-devices-en/knx-ip-interface-730-en). Through this it will send and receive commands to and from other devices to the KNX bus.
|
|
|
|
There is currently support for the following device types within Home Assistant:
|
|
|
|
- [Binary Sensor](/components/binary_sensor.knx)
|
|
- [Switch](/components/switch.knx)
|
|
- [Thermostat](/components/thermostat.knx)
|
|
|
|
A `knx` section must be present in the `configuration.yaml` file and contain the following options as required:
|
|
|
|
```yaml
|
|
knx:
|
|
host: IP_ADDRESS
|
|
port: PORT
|
|
```
|
|
|
|
- **host** (*Required*): The IP address of the KNX/IP interface to use. You can use "0.0.0.0" if your KNX/IP gateway supports discovery.
|
|
- **port** (*Optional*): The UDP port number. Defaults to `3671`.
|