1.4 KiB
1.4 KiB
| layout | title | description | date | sidebar | comments | sharing | footer |
|---|---|---|---|---|---|---|---|
| page | MySensors sensors support | Instructions how to integrate MySensors sensors into Home Assistant. | 2015-05-14 21:57 | false | false | true | true |
The [MySensors](https://www.mysensors.org) project combines Arduino boards with NRF24L01 radio boards to build sensor networks.
Integrate your Serial MYSensors Gateway by adding the following to your configuration.yaml file:
# Example configuration.yaml entry
sensor:
platform: mysensors
port: /dev/ttyACM0
Configuration variables:
- port (Required): The port where your board is connected to your Home Assistant host.
- debug (Optional): Enable or disable verbose debug logging.
- persistence (Optional): Enable or disable local persistence of sensor information. If this is disabled, then each sensor will need to send presentation messages after Home Assistant starts.
- persistence_file (Optional): Path to a file to save sensor information. The file extension determines the file type. Currently supported file types are 'pickle' and 'json'.
- version (Optional): Specifies the MySensors protocol version to use (ex. 1.4, 1.5).
If you are using an original Arduino the port will be named ttyACM*. The exact number can be determined with the command shown below.
ls /dev/ttyACM*