home-assistant.github.io/source/_addons/tellstick.markdown

layout	title	description	date	sidebar	comments	sharing	footer	featured
page	TellStick	Telldus TellStick service enabler and tools.	2017-12-04 21:31	true	false	true	true	false

Setting up the Tellstick service and tools contained in the telldus-core package and adding configuration to enable Tellstick and Tellstick Duo to work on your Hass.io.

To use this add-on, you first install it from the list of Built-in add-ons in Hass.io. After installation you are presented with a default and example configuration, to alter this you must follow both the JSON format and also be aligned with the valid parameters for Tellstick configuration file (tellstick.conf).

After any changes has been made to the configuration you need to restart the add-on for the changes to take effect.

Configuration variables:

• id (Required): This is a number and must be unique for each device.
• name (Required): A name for easy identification of the device.
• protocol (Required): This is the protocol the device uses. More on the different protocols later down.
• model (Optional): The parameter model is only used by some protocols where there exists different types of devices using the same protocol. This can be dimmers versus non-dimmers, codeswitch versus selflearning etc.
• house (Optional): Depending on protocol the values here can vary a lot to identify or group per house or type.
• unit (Optional): Unit identifier, in most cases a value between 1 to 16 and often used in combination with house.
• fade (Optional): Fade is either true or false and tells a dimmer if is should fade smooth or instant between values (only for IKEA protocol as it seems).
• code (Optional): A number series based on ones and zeroes often used for dip-switch based devices.

You will need to add internal communication details to configuration.yaml to enable the integration from Hass.io and the add-on.

# Example configuration.yaml entry

tellstick:
    host: core-tellstick
    port: [50800, 50801]
    

To add lights, sensors and switches you follow the guidelines for each type individually that is described for Home Assistant

The add-on will also enable you to interact with tdtool via a Home Assistant services call, see example below for selflearning device.

{% linkable_title Examples %}

Example for adding more devices in the add-on configuration (note the comma separator between devices):

{
  "devices": [
    {
      "id": 1,
      "name": "Outdoor light",
      "protocol": "everflourish",
      "model": "selflearning-switch",
      "house": "A",
      "unit": "1"
    },
    {
      "id": 2,
      "name": "Hallway dimmer",
      "protocol": "risingsun",
      "model": "selflearning-dimmer",
      "house": "A",
      "unit": "2"
    }
  ]
}

If you wish to teach a selflearning device in your TellStick configuration:

Go to Home Assistant service call in Developer tools Select

• Domain hassio
• Service: addon_stdin
• Service Data: {"addon":"core_tellstick","input":"learn 1"}

Replace 1 with the corresponding ID of the device in your TellStick configuration.