1.2 KiB
1.2 KiB
| layout | title | description | date | sidebar | comments | sharing | footer | logo | ha_category |
|---|---|---|---|---|---|---|---|---|---|
| component | Heatmiser thermostat | Instructions how to integrate Heatmiser thermostats within Home Assistant. | 2015-12-11 12:35 | true | false | true | true | heatmiser.png | Thermostat |
The heatmiser thermostat platform let you control Heatmiser DT/DT-E/PRT/PRT-E thermostats from Heatmiser. The module itself is currently setup to work over a RS232 -> RS485 converter, therefore it connects over IP.
To set it up, add the following information to your configuration.yaml file:
thermostat:
platform: heatmiser
ipaddress: YOUR_IPADDRESS
port: YOUR_PORT
tstats:
1:
id: THERMOSTAT_ID
name: THERMOSTAT_NAME
A single interface can handle up to 32 connected devices.
Configuration variables:
- ipaddress (Required): The ip address of your interface.
- port (Required): The port that the interface is listening on.
- tstats (Required): A list of thermostats activated on the gateway.
- id (Required): The id of the thermostat as configured on the device itself
- name (Required): A friendly name for the themostat