38 lines
No EOL
1.2 KiB
Markdown
38 lines
No EOL
1.2 KiB
Markdown
---
|
|
layout: component
|
|
title: "Heatmiser thermostat"
|
|
description: "Instructions how to integrate Heatmiser thermostats within Home Assistant."
|
|
date: 2015-12-11 12:35
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: heatmiser.png
|
|
ha_category: Thermostat
|
|
---
|
|
|
|
|
|
The heatmiser thermostat platform let you control [Heatmiser DT/DT-E/PRT/PRT-E](http://www.heatmisershop.co.uk/heatmiser-slimline-programmable-room-thermostat/) thermostats from Heatmiser. The module itself is currently setup to work over a RS232 -> RS485 converter, therefore it connects over IP.
|
|
|
|
To set it up, add the following information to your `configuration.yaml` file:
|
|
|
|
```yaml
|
|
thermostat:
|
|
platform: heatmiser
|
|
ipaddress: YOUR_IPADDRESS
|
|
port: YOUR_PORT
|
|
tstats:
|
|
1:
|
|
id: THERMOSTAT_ID
|
|
name: THERMOSTAT_NAME
|
|
```
|
|
|
|
A single interface can handle up to 32 connected devices.
|
|
|
|
Configuration variables:
|
|
|
|
- **ipaddress** (*Required*): The ip address of your interface.
|
|
- **port** (*Required*): The port that the interface is listening on.
|
|
- **tstats** (*Required*): A list of thermostats activated on the gateway.
|
|
- **id** (*Required*): The id of the thermostat as configured on the device itself
|
|
- **name** (*Required*): A friendly name for the themostat |